Make pre-order

(1)
average
cm: 15.08 w x 16.02 d x 20.02 h
in: 5.937 w x 6.307 d x 7.882 h
2 BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Download parts (11)right_foot and (15)right_lower_leg for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
(1)AC5_cannon (repaired). stl
2.02 MiB 1 h 35 min
1 m
Download
(2)head (repaired).stl
0.66 MiB 2 h 25 min
2 m
Download
(3)left_foot (repaired).s tl
1.67 MiB 3 h 42 min
2 m
Download
(4)left_gun (repaired).st l
5.19 MiB 2 h 40 min
2 m
Download
(5)left_gun_barrels (repa ired).stl
0.34 MiB 1 h 10 min
1 m
Download
(6)Left_hand (repaired).s tl
9.07 MiB 2 h 17 min
1 m
Download
(7)left_lower_leg (repair ed).stl
4.46 MiB 5 h 57 min
4 m
Download
(8)left_soulder_armor (re paired).stl
0.10 MiB 44 min
<1 m
Download
(9)left_upper_leg (repair ed).stl
7.93 MiB 2 h 57 min
2 m
Download
(10)lower_torso (repaired ).stl
22.08 MiB 7 h 7 min
4 m
Download
(11)right_foot (repaired) .stl
1.66 MiB 3 h 42 min
2 m
Download
(12)right_gun (repaired). stl
5.19 MiB 2 h 40 min
2 m
Download
(13)right_gun_barrels (re paired).stl
0.34 MiB 1 h 10 min
1 m
Download
(14)right_hand (repaired) .stl
9.06 MiB 2 h 18 min
1 m
Download
(15)right_lower_leg (repa ired).stl
4.46 MiB 5 h 52 min
4 m
Download
(16)right_soulder_armor ( repaired).stl
0.10 MiB 44 min
<1 m
Download
(17)right_upper_leg (repa ired).stl
7.92 MiB 2 h 56 min
2 m
Download
(18)torso (repaired).stl
19.09 MiB 33 h 42 min
21 m
Download

*This model is an inspiration taken from the pictures of Shimmering-Sword's works. Designed for 3D printing.

The 3D model represents a face-lift of Marauder Mech. Just like the other Marauder, the 3D model features ball joints, which increase its workability and operability.

This Marauder 3D model consists of 19 separate parts. All parts are designed to fit onto 19x19 cm print bed. They are created in Autodesk Maya and converted into STL files. The files are checked and corrected in Netfabb

There’s a detailed video guide on the assembly of the 3D model. Check the video icon at the far right of the 3D model’s picture slider.

This Marauder 3D model with changed looks will fit perfectly into the collection of your 3D printed MWO Mechs.

Buy Marauder 3D model STL files by clicking the green Buy button in the top-right corner of the model’s page. Continue to checkout. Provide your PayPal or credit card details.

Download all the files in a single .zip folder. You will also get the PDF file with printing recommendations for CURA 15.06 slicing program.

If you don’t have a 3D printer, use the services of our partners, 3DHubs and Treatstock, to 3D print the model directly from our website. Select the files you want to 3D print and click the Print with 3DHubs or Print with Treatstock button.
 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 30mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 1.5mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Embed code

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings