Make pre-order

(1)
average
cm: 20 w x 16.7 d x 26.5 h
in: 7.874 w x 6.575 d x 10.433 h
4
BUY FOR  $26.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Version 1 and Version 2 are the files for Hellbringer BattleMech 3D model optimized for 3D printing, the preview pictures of which you see above.

It is recommended:

  • to print Version 1 STL files on FDM/FFF 3D printers;
  • to print Version 2 STL files on DLP/SLA/SLS 3D printers.
File Name File Size Time / Filament
1_arm_R.STL
0.95 MiB 3 h 40 min
2 m
Download
2_body.STL
1.90 MiB 11 h 27 min
7 m
Download
3_arm_L.STL
0.95 MiB 3 h 39 min
2 m
Download
4_leg_R.STL
3.24 MiB 6 h 42 min
4 m
Download
5_pelvis.STL
0.25 MiB 3 h 33 min
2 m
Download
6_leg_L.STL
3.23 MiB 6 h 41 min
4 m
Download

Hellbringer reigns!
Now on Gambody Marketplace!
Hellbringer developed by Clan Hell's Horses in 2926 year. Although he doesn't have a lot of armor like many heavy Mechs, but his great mobility and top speed of 86.4 km / h make him a dangerous opponent. Equipped with powerful anti-personnel equipment, advanced electronics and its design gives a good offensive potential.

Technical specifications:

  • Class: Heavy
  • Mass: 65 tons
  • Chassis: T-E H65 Standard
  • Armor: Forging Omni-H24
  • Engine: Fusion 325 XL
  • Communications System: CH2B Alpha-Com
  • Targeting Tracking System: Version Delta-II TTS(A)
  • Heat Sinks: 13 Double Heat Sinks
  • Speed: 86.4 km/h
  • Armament:    
    • 1x Anti-Missile System
    • 2x ER PPCs
    • 4x Anti-Personnel Pods
    • 3x ER Medium Lasers
    • 1x Streak SRM-6
    • 2x Machine Guns

Of course speed is not the main advantage... It’s equipped with one of the most powerful weapons that can perfectly show itself in many factors of combat such as siege, defense, offensive. An excellent killer which was chosen by many players.

The Inner Sphere first encountered the Hellbringer facing Clan Jade Falcon, which favors the design for its immense offensive potential. Earning the codename Loki by Galen Cox, an AFFC officer who declared each of the Hellbringer's various versions as an "Utterly Mad configuration" These words are very good description for this robot. And after his magnificent history, through the years, obstacles and warfare he finally appears on the Gambody Marketplace!

You can get Hellbringer BattleMech 3D Printing files right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

All .STL files for 3D printing have been checked and corrected in Netfabb.

Note: Before starting 3D printing the model, read the Printing Details for CURA 2.7.0 software.

There are 35 parts for FDM version and 6 parts for SLS.
All parts of the joints must be printed at 100% infill.
All limbs are movable and the torso rotates 360°.
The SLS version has a special connector for the arms and legs, so you can change position in nine different ways!

Scale:
Based on the scale of the MWO tables and a pilot proportions of 2m tall.
In the game it size is 15.8 meters with shoulder weapon.
15000/60 = 250 мм(9.84 in.) tall - without shoulders' weapon.
15800/60 = 265 мм(10.43 in.) tall - with shoulder weapon.
15800/100 = 158 mm(6.22 in.) tall - SLS version

FDM version:
- Is 1:60 scale and after being printed will stand 265 mm tall, 200 mm wide, 167 mm deep;
- Is designed to save almost all movable elements its prototype has;
- Has removable hinges that should be printed at 100% infill to make them solid.

SLS/SLA version:
- Is 1:100 scale and will stand 159 mm tall, 119 mm wide, 100 mm deep.
- Has as few details as possible to keep printing costs down.
Watch the tutorial video on how to assemble Hellbringer BattleMech 3D Printing Miniature at Gambody YouTube channel.

Also Male and female pilots 3D printing miniatures are available for purchase at Gambody. They will become a perfect match for your mech.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 2.7.0. and print on an Ultimaker 2 in PLA material.

Recommendations:

If you printing joints with PLA material you should increase the scale of joints at 2-3% in your slicing program.

If you printing joints with ABS/CPE material you should increase the scale of joints at 1% in your slicing program.

Note: To maintain model quality, do not try to increase or decrease the size, since the hinges may not fit and the model will not be assemble or movable after scale changes.

To avoid printing problems, we recommend the following settings:

Quality 
Layer Height: 0.1 mm
Initial Layer Height: 0.27 mm
Line Width: 0.35 mm
Wall Line Width: 0.35 mm
   Outer Wall Line Width: 0.35 mm
   Inner Wall(s) Line Width: 0.35 mm
   Top/Bottom Line Width: 0.35 mm
   Infill Line Width: 0.35 mm
   Skirt/Brim Line Width: 0.35 mm
   Support Line Width: 0.35 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 1.05 mm
Wall Line Count: 3
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8 (all parts of the joints should be printed with 0)
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8 (all parts of the joints should be printed with 999999)
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0.025 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest
Ignore Small Z Gaps: Check

Infill 
Infill Density: 20% (all parts of the joints should be printed at 100%)

Infill Line Distance: 3.5 mm (all parts of the joints should be printed with 0.35 mm)
Infill Pattern: Grid (all parts of the joints should be printed with Lines)
Infill Line Directions: [ ]
Infill Overlap Percentage: 10% (thу same for the joints)
    Infill Overlap: 0.035 mm (thу same for the joints)
Skin Overlap Percentage: 5%
    Skin Overlap: 0.0175 mm
Infill Wipe Distance: 0.0875 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Material 
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.7 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 20 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 40 mm/s
      Outer Wall Speed: 30 mm/s
      Inner Wall Speed: 40 mm/s
    Top/Bottom Speed 20 mm/s
    Support Speed: 30 mm/s
      Support Infill Speed: 30 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 30 mm/s

    Initial Layer Print Speed: 30 mm/s
    Initial Layer Travel Speed: 72 mm/s
Skirt/Brim Speed: 30 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm 

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.27 mm (thу same for the joints)
    Regular Fan Speed at Layer: 2 (thу same for the joints)
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50° (all parts of the joints should be printed with 30°)
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 % (all parts of the joints should be printed with 25%)
    Support Line Distance: 2.3333 mm (all parts of the joints should be printed with 1.4 mm)
Support Z Distance: 0.15 mm
    Support Top Distance: 0.15 mm
    Support Bottom Distance: 0.15 mm
Support X/Y Distance: 0.8 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental 
Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings