Make pre-order

(4)
average
cm: 12.8 w x 8.2 d x 16 h
in: 5.039 w x 3.228 d x 6.299 h
2
BUY FOR  $16.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
OW_gun (rep) (repaired) ( repaired).stl
1.68 MiB 34 min
<1 m
Download
OW_mccre ( rep ) (repair ed) (repaired).stl
42.30 MiB 27 h 36 min
18 m
Download

“Justice ain’t gonna dispense itself.”

McCree 3D model showcases one of Overwatch heroes with accurate details, all made for 3D printing. The in-game character is known for his deadeye precision target skills and for the use of his Peacekeeper revolver.
He managed to make a name while a member of the Deadlock Gang, in which he dealt with weapon trafficking, until he and his associates were employed in an Overwatch operation. When facing two potential options for his future, he chose to join the Overwatch ops division.

Jesse McCree came to consider that he can right his past sins by dealing with the injustice of the world. And while his skills and abilities are sought after by varied organizations, McCree fights for the causes he believes are just.

McCree 3D model is created in Autodesk Maya, with special attention given to the outer shell details of the model. The intricate detailing creates a greater sense of reality. 

The 3D model file is saved in STL format and is checked and corrected in Netfabb. It can be 3D printed on any type of 3D printer. 

Detailed printing recommendations are provided for CURA 15.06, to ease your printing experience. 

Printing time: 20h 41min

Printing material: 14.5m

After being 3D printed, the 3D model will stand 128mm wide, 160mm tall, and 82mm deep.

Buy McCree 3D model STL file by clicking the green Buy button. Insert your credit card or PayPal details and download the file. Start 3D printing immediately, a high-poly model for your collection of 3D printed video game characters.
If you don’t own a 3D printer, 3DHubs, our partner, can help you 3D print it. Click the Print with 3DHubs button, choose the material and the 3D printing provider and wait for your 3D print to arrive at your door step.

________________________

On 28.11.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 28.11.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings