Premium Stock

Battlestar Galactica 1978 3D Printing Model | Assembly

(3)
cm: 25.8 w x 62.9 d x 13 h
in: 10.157 w x 24.764 d x 5.118 h

Source Files

|

Description

|

Printing Details

This 3D Model of Battlestar Galactica 1978 consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 2 versions of Battlestar Galactica 1978 STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
  • STL files of high-poly Battlestar Galactica 1978 3D Model for 3D printing consist of 93 files;
  • Sizes for:
  • FFF/FDM: 91 mm tall, 258 mm wide, 629 mm deep;
  • FFF/FDM on the stand: 130 mm tall, 258 mm wide, 629 mm deep;
  • DLP/SLA: 46 mm tall, 129 mm wide, 315 mm deep;
  • DLP/SLA on the stand: 65 mm tall, 129 mm wide, 315 mm wide;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_01_bodyPart_a_F_FDM (rep aired).stl
21.88 MiB 39 h 51 min 21 m 149 x 58 x 129 Download
_02_bodyPart_b_F_FDM (rep aired).stl
38.36 MiB 57 h 16 min 29 m 162 x 65 x 141 Download
_03_bodyPart_c_Mid_FDM (r epaired).stl
31.81 MiB 57 h 13 min 31 m 79 x 63 x 186 Download
_04_bodyPart_d_Rr_FDM (re paired).stl
29.38 MiB 85 h 41 min 45 m 155 x 74 x 175 Download
_06_engineInner_FDM (repa ired).stl
3.69 MiB 7 h 38 min 4 m 112 x 39 x 24 Download
_07_batteryCap_FDM_FDM (r epaired).stl
0.81 MiB 3 h 37 min 2 m 60 x 59 x 12 Download
_08_hangarPilon_e_FrontL_ FDM (repaired).stl
1.67 MiB 3 h 5 min 2 m 27 x 42 x 48 Download
_09_hangarPilon_f_MidL_FD M (repaired).stl
1.42 MiB 2 h 29 min 1 m 26 x 36 x 56 Download
_10_hangarPilon_h_RearL_F DM (repaired).stl
2.64 MiB 3 h 5 min 2 m 26 x 42 x 48 Download
_11_hangarPilon_g_MidL_FD M (repaired).stl
1.67 MiB 2 h 44 min 1 m 60 x 24 x 24 Download
_12_hangarPilon_a_FrontR_ FDM (repaired).stl
1.68 MiB 3 h 5 min 2 m 27 x 42 x 48 Download
_13_hangarPilon_b_MidR_FD M (repaired).stl
1.42 MiB 2 h 30 min 1 m 26 x 36 x 56 Download
_14_hangarPilon_d_RearR_F DM (repaired).stl
10.75 MiB 3 h 3 min 2 m 26 x 42 x 48 Download
_15_hangarPilon_c_MidR_FD M (repaired).stl
1.67 MiB 2 h 47 min 1 m 60 x 24 x 24 Download
_16_hangarPartClear_a_Fro ntL_FDM (repaired).stl
5.00 MiB 19 h 59 min 10 m 66 x 29 x 150 Download
_17_hangarPartWithText_a_ FrontL_FDM (repaired).stl
5.21 MiB 20 h 4 min 10 m 66 x 29 x 150 Download
_18_hangarPart_b_MidRL_FD M (repaired).stl
4.22 MiB 14 h 48 min 8 m 66 x 29 x 103 Download
_19_hangarPart_c_ReartL_F DM (repaired).stl
0.73 MiB 3 h 59 min 2 m 65 x 29 x 44 Download
_20_hangarPart_d_FrontR_F DM (repaired).stl
5.00 MiB 20 h 23 min 10 m 66 x 29 x 150 Download
_21_hangarPart_e_MidR_FDM (repaired).stl
4.22 MiB 15 h 4 min 8 m 66 x 29 x 103 Download
_22_hangarPart_f_ReartR_F DM (repaired).stl
0.73 MiB 4 h 7 min 2 m 34 x 66 x 44 Download
_23_hangarGlass_X2_FDM (r epaired).stl
0.01 MiB 10 min <1 m 30 x 11 x 3 Download
_24_engineGlassWhite_X2_F DM (repaired).stl
0.20 MiB 23 min <1 m 30 x 23 x 3 Download
_25_engineGlassRed_FDM (r epaired).stl
0.06 MiB 6 min <1 m 17 x 9 x 3 Download
_26_standA_FDM (repaired) .stl
1.09 MiB 5 h 11 min 3 m 90 x 39 x 59 Download
_27_standBPart_a_FDM (rep aired).stl
1.09 MiB 5 h 36 min 3 m 90 x 39 x 62 Download
_28_standBPart_b_FDM (rep aired).stl
0.01 MiB 44 min <1 m 72 x 11 x 11 Download
_29_pin_V1_X43_FDM (repai red).stl
0.00 MiB 5 min <1 m 17 x 4 x 4 Download
_30_pin_V2_X8_FDM (repair ed).stl
0.01 MiB 15 min <1 m 17 x 24 x 4 Download
_31_pin_V3_X6_FDM (repair ed).stl
0.00 MiB 4 min <1 m 13 x 4 x 4 Download
_32_textPlane_FDM (repair ed).stl
1.21 MiB 5 h 53 min 3 m 157 x 37 x 28 Download
_33_bodyPart_e_FrontT_FDM (repaired).stl
0.08 MiB 23 min <1 m 47 x 19 x 2 Download
_35__bodyPart_g_FrontL_FD M (repaired).stl
0.21 MiB 14 min <1 m 12 x 11 x 17 Download
_36_hangarPart_g_X2_FDM ( repaired).stl
0.15 MiB 48 min <1 m 25 x 82 x 3 Download
_37_hangarPart_h_X2_FDM ( repaired).stl
0.03 MiB 14 min <1 m 11 x 42 x 3 Download
_34_bodyPart_f_FrontBot_F DM (repaired).stl
4.85 MiB 5 h 22 min 3 m 32 x 117 x 20 Download
_38_hangarPartWithText_a_ FrontR_FDM (repaired).stl
5.21 MiB 20 h 45 min 10 m 66 x 29 x 150 Download
_05_engineInnerCap_FDM (r epaired).stl
5.33 MiB 5 h 48 min 3 m 153 x 58 x 11 Download
...

ABOUT THIS 3D MODEL

Galactica-type Battlestar is a capital ship that was designed and deployed after the outbreak of hostilities between the Cylons and Colonials. The military craft is equipped with sublight and maneuvering engines, it can accommodate a crew of 5000 people and is armed with heavy weaponry. Battlestar Galactica operates as a fighter carrier, a battleship and a mobile base of operations all in one.

Inspired by the iconic 1978 TV series, our contributing 3D artist created the Battlestar Galactica 1978 model for 3D printing. The starship has several design choices that allow you to show creativity while painting and displaying the model. There is wiring to introduce LEDs to light up engines, landing bays and bridge of the craft. A great model for 3D printing that can bring you an unforgettable experience and much enjoyment!

ADAPTATION FOR 3D PRINTING

Battlestar Galactica 1978 for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 38 hours in total.

For you to receive the cleanest 3D printing result possible, minimize the amount of filament needed for generated support, and make use of the active elements designed by Gambody Engineers, the battleship was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won’t face difficulties when placing the parts on a build plate. When downloading any model’s file you will also receive “Assembly Manual” for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and “Assembly Manual” before getting down to the Battlestar Galactica 1978 model.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the length of the Battlestar Galactica 1978. The 3D printing model’s chosen scales are 1:2000 for the FFF/FDM version and 1:4000 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

  • Contains 38 parts;
  • A printed model is 91 mm tall, 258 mm wide, 629 mm deep;
  • A printed model on the stand is 130 mm tall, 258 mm wide, 629 mm deep;
  • Hidden compartment to store a battery;
  • Two landing bay design options - with and without the lettering;
  • Decorative nameplate with the logo;
  • Alternative lettering for 11 Colonial Battlestars;
  • There are tunnels inside the ship for you to introduce LED wiring and light up engines, landing bays and bridge;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

  • Contains 33 parts;
  • A printed model is 46 mm tall, 129 wide, 315 mm deep;
  • A printed model on the stand is 65 mm tall, 129 wide, 315 mm deep;
  • Hidden compartment to store a battery;
  • Two landing bay design options - with and without the lettering;
  • Decorative nameplate with the logo;
  • There are tunnels inside the ship for you to introduce LED wiring and light up engines, landing bays and bridge;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of Battlestar Galactica 1978 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Battlestar Galactica 1978 3D Printing Model on Gambody YouTube channel.

Also, you may like the Cylon Raider TOS  and Viper TOS 3D Printing Models, and other BSG models for 3D Printing.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings