Premium Stock

DeLorean 3D Printing Model | Assembly Kit 2: Engines, Mr Fusion, Active Suspension

(10)
cm: 23.4 w x 52.7 d x 15.4 h
in: 9.213 w x 20.748 d x 6.063 h

Source Files

|

Description

|

Printing Details

This 3D printing assembly kit consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

DeLorean 3D Printing Model | Assembly Kit 2: Engines, Mr Fusion, Active Suspension comes in 1 version for FFF/FDM 3D printers. Files are available for download immediately after the purchase.

Detailed information about this 3D printing assembly kit is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
as_1_shock_spring_front_R (repaired).stl
0.30 MiB 30 min <1 m 15 x 23 x 13 Download
as_2_shocks_in_front_R (r epaired).stl
0.06 MiB 23 min <1 m 12 x 12 x 23 Download
as_3_shocks_out_front_R ( repaired).stl
0.08 MiB 27 min <1 m 11 x 11 x 23 Download
as_4_susp_beam_front_bot_ R (repaired).stl
0.03 MiB 26 min <1 m 38 x 15 x 10 Download
as_5_susp_beam_front_top_ R (repaired).stl
0.03 MiB 27 min <1 m 38 x 30 x 8 Download
as_6_sub_bearing_front_R (repaired).stl
0.01 MiB 4 min <1 m 11 x 10 x 4 Download
as_7_bearing_front_R (rep aired).stl
1.47 MiB 1 h 35 min 1 m 46 x 46 x 9 Download
as_8_sub_wheel_front_R (r epaired).stl
0.04 MiB 42 min <1 m 24 x 31 x 14 Download
as_9_wheels_beam_front (r epaired).stl
0.05 MiB 29 min <1 m 178 x 6 x 3 Download
as_10_shock_spring_front_ L (repaired).stl
0.30 MiB 30 min <1 m 15 x 23 x 13 Download
as_11_shocks_in_front_L ( repaired).stl
0.06 MiB 23 min <1 m 12 x 12 x 23 Download
as_12_shocks_out_front_L (repaired).stl
0.08 MiB 25 min <1 m 11 x 11 x 23 Download
as_13_susp_beam_front_bot _L (repaired).stl
0.03 MiB 26 min <1 m 38 x 15 x 10 Download
as_14_susp_beam_front_top _L (repaired).stl
0.03 MiB 27 min <1 m 38 x 30 x 8 Download
as_15_sub_bearing_front_L (repaired).stl
0.01 MiB 4 min <1 m 11 x 10 x 4 Download
as_16_bearing_front_L (re paired).stl
1.47 MiB 1 h 35 min 1 m 46 x 46 x 9 Download
as_17_sub_wheel_front_L ( repaired).stl
0.04 MiB 43 min <1 m 24 x 31 x 14 Download
as_18_shock_spring_back_R (repaired).stl
0.30 MiB 30 min <1 m 18 x 24 x 13 Download
as_19_shocks_in_back_R (r epaired).stl
0.07 MiB 30 min <1 m 12 x 12 x 29 Download
as_20_shocks_out_back_R ( repaired).stl
0.08 MiB 25 min <1 m 11 x 11 x 23 Download
as_21_sub_wheel_back_R (r epaired).stl
0.07 MiB 1 h 8 min 1 m 33 x 33 x 18 Download
as_22_bearing_connector_b ack_R (repaired).stl
0.00 MiB 14 min <1 m 8 x 9 x 17 Download
as_23_bearing_back_R (rep aired).stl
0.96 MiB 2 h 31 min 1 m 51 x 51 x 10 Download
as_24_susp_beam_back_top_ R (repaired).stl
0.03 MiB 10 min <1 m 21 x 20 x 6 Download
as_25_susp_beam_back_bot_ R (repaired).stl
0.01 MiB 15 min <1 m 41 x 9 x 6 Download
as_26_susp_beam_back_cent er_R (repaired).stl
0.02 MiB 36 min <1 m 97 x 22 x 7 Download
as_27_susp_beam_engine_bo t_R (repaired).stl
0.25 MiB 36 min <1 m 26 x 19 x 54 Download
as_28_shock_spring_back_L (repaired).stl
0.30 MiB 30 min <1 m 18 x 24 x 13 Download
as_29_shocks_in_back_L (r epaired).stl
0.07 MiB 30 min <1 m 12 x 12 x 29 Download
as_30_shocks_out_back_L ( repaired).stl
0.08 MiB 26 min <1 m 11 x 11 x 23 Download
as_31_sub_wheel_back_L (r epaired).stl
0.07 MiB 1 h 8 min 1 m 33 x 33 x 18 Download
as_32_bearing_connector_b ack_L (repaired).stl
0.00 MiB 14 min <1 m 8 x 9 x 17 Download
as_33_bearing_back_L (rep aired).stl
0.96 MiB 2 h 31 min 1 m 51 x 51 x 10 Download
as_34_susp_beam_back_top_ L (repaired).stl
0.03 MiB 9 min <1 m 21 x 20 x 6 Download
as_35_susp_beam_back_bot_ L (repaired).stl
0.01 MiB 15 min <1 m 41 x 9 x 6 Download
as_36_susp_beam_back_cent er_L (repaired).stl
0.02 MiB 36 min <1 m 97 x 22 x 7 Download
as_37_susp_beam_engine_bo t_L (repaired).stl
0.25 MiB 35 min <1 m 26 x 19 x 54 Download
ce_1_radiator (repaired). stl
4.44 MiB 5 h 57 min 3 m 83 x 23 x 33 Download
ce_2_tank (repaired).stl
5.32 MiB 4 h 33 min 3 m 68 x 92 x 25 Download
ce_3_engine_2 (repaired). stl
10.79 MiB 20 h 60 min 11 m 78 x 72 x 67 Download
ce_5_engine_pipes (repair ed).stl
0.59 MiB 1 h 22 min 1 m 54 x 126 x 20 Download
ce_6_engine_belt_1 (repai red).stl
0.04 MiB 3 min <1 m 41 x 29 x 1 Download
ce_7_engine_belt_2 (repai red).stl
0.04 MiB 3 min <1 m 42 x 46 x 1 Download
ce_8_exhaust_5_L (repaire d).stl
2.35 MiB 57 min <1 m 27 x 14 x 43 Download
ce_9_exhaust_4_L (repaire d).stl
2.39 MiB 34 min <1 m 32 x 14 x 26 Download
ce_10_exhaust_2 (repaired ).stl
0.21 MiB 18 min <1 m 19 x 40 x 7 Download
ce_11_exhaust_5_R (repair ed).stl
2.30 MiB 52 min <1 m 25 x 16 x 43 Download
ce_12_exhaust_4_R (repair ed).stl
2.39 MiB 34 min <1 m 32 x 14 x 26 Download
ce_13_exhaust_3 (repaired ).stl
0.21 MiB 18 min <1 m 19 x 40 x 7 Download
ce_14_exhaust_1 (repaired ).stl
0.27 MiB 2 h 10 min 1 m 11 x 30 x 91 Download
ce_15_exhaust_mount_2 (re paired).stl
0.03 MiB 4 min <1 m 22 x 11 x 3 Download
ce_16_exhaust_mount_1 (re paired).stl
0.03 MiB 4 min <1 m 22 x 11 x 3 Download
lc_1_spare_tire_flex (rep aired).stl
11.26 MiB 1 h 31 min 1 m 57 x 57 x 11 Download
lc_2_spare_tire_plastic ( repaired).stl
8.81 MiB 1 h 22 min 1 m 57 x 57 x 11 Download
lc_3_spare_disk (repaired ).stl
3.55 MiB 1 h 47 min 1 m 46 x 46 x 12 Download
lc_4_under_hood_carpet (r epaired).stl
17.66 MiB 2 h 35 min 1 m 105 x 119 x 1 Download
te_1_external_engine_stri pes_x4 (repaired).stl
0.71 MiB 5 min <1 m 51 x 5 x 6 Download
te_2_external_engine (rep aired).stl
7.41 MiB 9 h 15 min 5 m 73 x 90 x 33 Download
te_3_coil_front (repaired ).stl
7.73 MiB 4 h 6 min 2 m 212 x 64 x 21 Download
te_4_panels_pipes_case_R (repaired).stl
5.98 MiB 1 h 23 min <1 m 8 x 7 x 109 Download
te_5_panels_pipes_case_L (repaired).stl
5.98 MiB 1 h 23 min <1 m 8 x 7 x 109 Download
te_6_coil_back_b_L (repai red).stl
4.40 MiB 3 h 13 min 2 m 40 x 41 x 89 Download
te_7_coil_back_a_L (repai red).stl
5.69 MiB 3 h 34 min 1 m 93 x 63 x 100 Download
te_8_coil_back_b_R (repai red).stl
4.40 MiB 3 h 16 min 2 m 40 x 41 x 89 Download
te_9_coil_back_a_R (repai red).stl
5.69 MiB 3 h 36 min 1 m 93 x 63 x 100 Download
te_10_time_engine_top_a_p art_2_3 (repaired).stl
0.08 MiB 8 h 28 min 6 m 70 x 83 x 27 Download
te_11_time_engine_top_b_p art_2_3 (repaired).stl
3.80 MiB 2 h 46 min 1 m 34 x 36 x 57 Download
te_12_top_hub (repaired). stl
0.51 MiB 1 h 47 min 1 m 45 x 21 x 25 Download
Ge_lock_10H x 5 (repaired ).stl
0.03 MiB 10 min <1 m 10 x 2 x 18 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
ce_4_engine_1 (repaired). stl
3.95 MiB 7 h 37 min 4 m 40 x 45 x 86 Download
...

ABOUT THIS 3D MODEL

According to the genius inventor Emmett “Doc” Brown, time-travel recipe is as easy as pie: Mr Fusion fuel processor converts garbage to power for the flux capacitor and the flight circuits which help generate 1.21 gigawatts of power needed to travel to any point in time. Well, we may understand what Mr Fusion is, we have enough household waste to feed it for sure and the author of the model did prepare a flux capacitor for 3D printing but what the hell is a gigawatt? All jokes aside, the time-travelling might be fiction now but we are totally convinced that Doc from 1985 would be stunned by the opportunities that 3D printing technology may bring. For example, this assembly kit comprises elements that will help your 3D printing DeLorean acquire all the essential parts both of an ordinary car and a time-travelling device. The Mr Fusion here replaces the nuclear fission reactor and the car’s exterior receives its futuristic flux coils. There is also a microchip for the time circuit controls that is fastened to the hood that the fictional car received at the beginning of the trilogy’s last instalment. While the microchip may as well include vacuum tubes, the 3D printing car’s engine parts impress with the meticulous attention to fine details and the author’s striving for realism. The things might be heavy in the future but creating your own time-travelling DeLorean has never been easier - just order the STL files! 

ADAPTATION FOR 3D PRINTING

While working on the Assembly Kit 2 of the DeLorean model, Gambody team made sure to make both model’s “time travelling” decorative elements and mechanic parts of the car as true to life as possible. Flux coils around the car’s body were separated for you to be able to print them in transparent filament and illuminate with rope light. All essential elements comprising the DMC’s engine like the radiator, exhaust pipes and hooks, gas tank, alternator and compressor belts etc. were “taken off” the car’s frame and are to be printed and assembled separately. The most careful attention was dedicated to the gem of this assembly kit - an active suspension that comprises the finest elements for you to assemble an extremely realistic rolling chassis. There were also prepared two different types of bearings for front and rear wheels of the 3D printing car. The reason why the front bearings are thinner is to allow for the simultaneous movement of front wheels with the help of a steering rack that was also introduced. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. The model's assembly requires additional "pins" to secure the parts of the 3D printed car. These pins do not come in STL files but can be made out of short pieces of regular 2.85 PLA, screws or wire of an appropriate diameter. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the DeLorean time machine. When downloading any file that comprises the kit you will also receive "Assembly Manual" in PDF format.

This is the description of the model's Assembly Kit 2: Engines, Mr Fusion, Active Suspension. Standard Assembly Kit 1 and additional Kit 3 can be ordered as separate items as well.

SPECIFICATION OF THE ASSEMBLY KIT 2: External Engine, Mr Fusion, Active Suspension

- The 3D printing model's chosen scale is 1:8 and it was calculated from the actual length of the DMC DeLorean car that is 4216 mm;
- Contains 70 parts that comprise the engines, outer coils, active suspension, bearings etc. elements of the 3D printing time machine;
- A printed 1:8 DeLorean is 154 mm tall, 234 mm wide, 527 mm deep;
- Assembly kit includes lock Ge_lock_10H x 5 to attach the model's parts securely without glue that needs to be printed 5 times

TE - Time Travel Engine:
Mr Fusion fuel processor placed on a hatch replaces the nuclear fission reactor from Kit 1;
- The box on the hood or the microchip for the time circuit controls is "fastened" to the hood with belts;
- Flux coils around the car body can be printed in transparent filament and illuminated with rope light;
- The wires connecting the time-travel engine parts are secured underneath the doors with hollow pipes;
- Blue wires do not come in STL files - 1.75mm PLA plastic can be used instead;

AS - Active suspension:
- The car's chassis can be assembled into the rolling one with the help of active suspension system;
- A spring, shock assembly, link, track rod, brake disc etc. form the basis of the car's active suspension;
- Rear wheels are equipped with rotating gear bearings that are easily printed one-piece;
- The front of the frame is equipped with a steering rack​ that allows the simultaneous movement of front wheels;
- The rotation of the front wheels is ensured by special thin bearings that are also to be printed one-piece;

CE - Car engine:
- Highly-detailed transmission case and engine are placed on the separated engine pipes;
Alternator belt and compressor belt to put over the pulleys; 
- Complete exhaust system with exhaust pipes and hooks to secure the exhaust system underneath the frame;
- The radiator is to be secured at the front of the frame;
- Similar to DMC-12, the car's gas tank is to be placed in the middle of the frame;
- Blue tubes do not come in STL files - 1.75mm PLA plastic can be used instead;

LC - Luggage compartment:
- A spare wheel (tyre + rim) is to be placed into its designated place in the luggage compartment interior;
- Two variants of spare wheel tyre to choose from: one is meant for plastic filament, the other is hollow for flexible material;
- A cover to place over the luggage compartment.

ADDITIONAL DELOREAN 3D MODEL KITS: 

Kit 1: Standard Assembly Kit

Kit 3: Car Interior, Wheels and Platforms

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of DeLorean Model Assembly Kit 2 for 3D Printing which consist of 70 parts;
- Assembly Kit 2 that consists of engines, outer coils, active suspension, bearings;
- High-poly detailed model of DeLorean in Kit 2;
- Assembly Manual in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get DeLorean Model Assembly Kit 2 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble DeLorean 3D Printing Model | Assembly Kit 2: Engines, Mr Fusion, Active Suspension at Gambody YouTube channel.

Also, you may like Marty McFly and Doc Brown 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90˚
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings