Premium Stock

Serenity 3D Printing Model | Assembly

(31)
cm: 26.1 w x 41.2 d x 22.9 h
in: 10.276 w x 16.22 d x 9.016 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of files for this model for FFF/FDM and DLP/SLA/SLS printers - files of both versions are available for download after the purchase;
  • STL files of Serenity Model for 3D printing which consist of 205 parts;
  • High-poly detailed model of Serenity​;
  • Detailed settings that we provide as a recommendation for Cura, PrusaSlicer, Simplify3D and Slic3r for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
3_hull_back_1 (repaired). stl
16.87 MiB 15 h 34 min 11 m 78 x 78 x 59 Download
4_hull_back_2 (repaired). stl
73.00 MiB 24 h 42 min 16 m 88 x 88 x 96 Download
5_sub_tail (repaired).stl
0.25 MiB 32 min <1 m 9 x 26 x 24 Download
6_tail (repaired).stl
11.42 MiB 58 min <1 m 18 x 22 x 46 Download
7_door (repaired).stl
0.13 MiB 24 min <1 m 32 x 24 x 3 Download
8_cap_1_R (repaired).stl
0.09 MiB 7 min <1 m 14 x 24 x 3 Download
9_cap_2_R (repaired).stl
0.09 MiB 7 min <1 m 24 x 16 x 3 Download
10_cap_1_L (repaired).stl
0.09 MiB 7 min <1 m 14 x 24 x 3 Download
11_cap_2_L (repaired).stl
0.09 MiB 7 min <1 m 24 x 16 x 3 Download
12_beam_1 (repaired).stl
0.29 MiB 55 min <1 m 14 x 10 x 48 Download
13_beam_2 (repaired).stl
0.28 MiB 1 h 9 min 1 m 13 x 8 x 56 Download
14_beam_3 (repaired).stl
0.29 MiB 1 h 17 min 1 m 13 x 8 x 64 Download
15_otor_1 (repaired).stl
17.00 MiB 2 h 4 min 1 m 19 x 29 x 93 Download
16_rotor_2 (repaired).stl
14.86 MiB 2 h 35 min 2 m 32 x 37 x 56 Download
17_rotor_3 (repaired).stl
19.41 MiB 1 h 54 min 1 m 28 x 35 x 44 Download
18_rotor_4 (repaired).stl
13.25 MiB 4 h 20 min 3 m 62 x 54 x 55 Download
19_rotor_5 (repaired).stl
19.42 MiB 1 h 55 min 1 m 28 x 35 x 44 Download
20_rotor_6 (repaired).stl
14.89 MiB 2 h 35 min 2 m 32 x 37 x 56 Download
21_rotor_7 (repaired).stl
16.99 MiB 2 h 5 min 1 m 19 x 29 x 93 Download
22_antens_x12 (repaired). stl
0.01 MiB 1 min <1 m 16 x 4 x 2 Download
23_turbine_1_R (repaired) .stl
15.76 MiB 3 h 44 min 2 m 38 x 38 x 44 Download
24_turbine_2_R (repaired) .stl
41.65 MiB 7 h 56 min 4 m 65 x 42 x 63 Download
25_turbine_1_L (repaired) .stl
15.76 MiB 3 h 43 min 2 m 38 x 38 x 44 Download
26_turbine_2_L (repaired) .stl
41.67 MiB 8 h 5 min 4 m 65 x 42 x 63 Download
27_wing_R (repaired).stl
13.61 MiB 3 h 13 min 2 m 86 x 11 x 48 Download
28_wing_L (repaired).stl
13.61 MiB 3 h 12 min 2 m 86 x 11 x 48 Download
29_piston_R (repaired).st l
0.12 MiB 13 min <1 m 5 x 5 x 40 Download
30_piston_L (repaired).st l
0.12 MiB 13 min <1 m 5 x 5 x 41 Download
31_slide_x4 (repaired).st l
0.10 MiB 9 min <1 m 7 x 3 x 26 Download
32_solar_battery_1_R (rep aired).stl
0.67 MiB 6 min <1 m 21 x 19 x 5 Download
33_solar_battery_2_R (rep aired).stl
0.13 MiB 9 min <1 m 24 x 22 x 4 Download
34_solar_battery_3_R (rep aired).stl
0.13 MiB 9 min <1 m 30 x 12 x 4 Download
35_solar_battery_4_R (rep aired).stl
0.13 MiB 15 min <1 m 38 x 15 x 4 Download
36_solar_battery_5_R (rep aired).stl
0.13 MiB 28 min <1 m 36 x 33 x 6 Download
37_solar_battery_1_L (rep aired).stl
0.67 MiB 6 min <1 m 21 x 19 x 5 Download
38_solar_battery_2_L (rep aired).stl
0.13 MiB 9 min <1 m 24 x 22 x 4 Download
39_solar_battery_3_L (rep aired).stl
0.13 MiB 9 min <1 m 30 x 12 x 4 Download
40_solar_battery_4_L (rep aired).stl
0.13 MiB 15 min <1 m 38 x 15 x 4 Download
41_solar_battery_5_L (rep aired).stl
0.13 MiB 28 min <1 m 36 x 33 x 6 Download
42_solar_battery_6 (repai red).stl
0.13 MiB 29 min <1 m 45 x 18 x 6 Download
43_window_1_R (repaired). stl
0.25 MiB 2 min <1 m 11 x 8 x 2 Download
44_window_2_R (repaired). stl
0.62 MiB 5 min <1 m 15 x 16 x 2 Download
45_window_3_R (repaired). stl
0.43 MiB 3 min <1 m 16 x 12 x 2 Download
46_window_1_L (repaired). stl
0.26 MiB 2 min <1 m 11 x 8 x 2 Download
47_window_2_L (repaired). stl
0.62 MiB 5 min <1 m 15 x 16 x 2 Download
48_window_3_L (repaired). stl
0.43 MiB 3 min <1 m 16 x 12 x 2 Download
49_Ge_lock_10_x23 (repair ed).stl
0.03 MiB 4 min <1 m 18 x 10 x 2 Download
50_paltform_1 (repaired). stl
0.44 MiB 35 h 20 min 23 m 153 x 166 x 131 Download
51_paltform_2 (repaired). stl
0.03 MiB 4 h 37 min 3 m 76 x 40 x 84 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
2_hull_center (repaired). stl
83.56 MiB 65 h 2 min 35 m 103 x 93 x 125 Download
52_kokpit (repaired).stl
23.46 MiB 1 h 12 min 1 m 31 x 40 x 18 Download
53_flap_big_x4 (repaired) .stl
4.77 MiB 45 min <1 m 19 x 13 x 44 Download
54_flap_small_x4 (repaire d).stl
4.75 MiB 21 min <1 m 14 x 10 x 26 Download
24_v2_turbine_2_vert_R (r epaired).stl
43.43 MiB 7 h 49 min 4 m 65 x 42 x 63 Download
26_v2_turbine_2_vert_L (r epaired).stl
43.52 MiB 7 h 54 min 4 m 65 x 42 x 63 Download
55_hull_back_1_v2 (repair ed).stl
17.59 MiB 16 h 38 min 11 m 78 x 78 x 59 Download
57_hull_back_2_cap_big_x4 (repaired).stl
1.28 MiB 31 min <1 m 15 x 17 x 43 Download
58_hull_back_2_cap_small_ x6 (repaired).stl
1.00 MiB 18 min <1 m 12 x 14 x 48 Download
56_hull_back_2_v2 (repair ed).stl
42.37 MiB 28 h 43 min 19 m 88 x 88 x 96 Download
1_v2_hull_front_with_wind ows (repaired).stl
47.62 MiB 33 h 35 min 21 m 76 x 80 x 165 Download
1_hull_front (repaired).s tl
86.04 MiB 31 h 38 min 19 m 76 x 71 x 163 Download
2_hull_center_v2_no_windo ws (repaired).stl
76.10 MiB 65 h 24 min 35 m 103 x 93 x 125 Download
...

ABOUT THIS 3D MODEL

Serenity is a small transport vessel used by a nine-person smuggler crew within Joss Whedon's sci-fi television series Firefly. Vaguely resembling the insect of the same name, the spaceship was purchased by Captain Malcolm Reynolds in the aftermath of a galactic Unification war and named after the Battle of Serenity Valley, the final decisive battle in the civil war. Although the space drama series lasted only fourteen episodes, both the show and the Firefly-class ship won the hearts of a huge army of fans who still list Serenity among their all-time favourite sci-fi spaceships. The author of this 3D printing project is no exception - the imaginative mind behind the awesome fictional machine spent 115 hours to prepare the legendary transportation means for any enthusiast to 3D print. Inspired by one of the most memorable and recognisable ships in science fiction, Serenity for 3D printing is made to depict every fine detail of the vessel’s design and is provided with awesome bonus features like tunnels for LED wiring or transparent bridge windows. Serenity might be not the most reliable transport - it always breaks down, seems to be mostly patched up with duct tape and even lacks any weapons! But what made it so well-loved by the large audience, must be Serenity’s warm and lived-in nature and love of the crew members that, according to the captain, “keeps her in the air when she oughta fall down, tells ya she's hurtin' 'fore she keens, makes her home.” 

ADAPTATION FOR 3D PRINTING

Serenity spaceship for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 38 hours in total. For you to receive the cleanest printing result possible and to minimise the amount of filament needed for generated support the Firefly-class vessel model was divided into many assembly parts, e.g. each solar panel, field generator housing, heat exchangers, cargo door, engine deployment jacks etc. are provided as separate STL files. The cargo door located at the front of the spaceship can be opened to access the lower deck. The windows on the bridge are also provided as six separate files for you to print them using transparent filament. There can be found special tunnels leading into the primary thruster and both main engines that were designed by our team for you to easily introduce LED wiring. For you to display Serenity in a flight position there is a special stand provided. Moreover, there is also a 1:200 Shuttle model available for you to complement Serenity's FFF/FDM version. All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. 

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the Serenity's actual length that is 82100 mm. The 3D printing model's chosen scale is 1/200 for FFF/FDM version and 1/400 for DLP/SLA/SLS version.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.1 version features:

  • A printed model is: 116 mm tall, 262 mm wide, 412 mm deep;
  • A printed model on a platform is: 229 mm tall, 261 mm wide, 412 mm deep;
  • New authentic cockpit with the figurines of the crew;
  • The figurines of the crew are adapted for resin printing exclusively;
  • Two hull versions: solid and with cutouts for the windows;
  • The cargo bay doors open;
  • You can assemble the model either with or without the landing gear;
  • Movable landing gear;
  • Vertical and horizontal positioning of the secondary engines;
  • Alternative front hull: solid and with the cutouts for the windows;
  • Alternative ship's tail: basic and adapted for LED wiring to light up the reactors and field generator housing.

DLP/SLA 1.1 version features:

  • A printed model is: 58 mm tall, 131 mm wide, 206 mm deep;
  • A printed model on a platform is: 114 mm tall, 130 mm wide, 206 mm deep;
  • New authentic cockpit with the figurines of the crew;
  • The cargo bay doors open;
  • You can assemble the model either with or without the landing gear;
  • Movable landing gear;
  • Vertical and horizontal positioning of the secondary engines;
  • Alternative front hull: solid and with the cutouts for the windows;
  • Alternative ship's tail: basic and adapted for LED wiring to light up the reactors and field generator housing.

FFF/FDM 1.0 version features:

  • Contains 54 parts;
  • A printed model is 230 mm tall, 256 mm wide, 390 mm deep;
  • Assembly kit includes one lock 49_Ge_lock_10_x23 to connect parts securely without glue that needs to be printed 23 times;
  • Rear engine baffles 53_flap_big_x4 and 54_flap_small_x4 need to be printed 4 times each and will require glue for assembly;
  • Static Discharge Spikes located above the bridge come as separate file 22_antens_x12 that needs to be printed 12 times;
  • Windows on the bridge are provided separately to be printed with the transparent filament for you to access the highly-detailed cockpit;
  • Tunnels throughout the spaceship's body are provided for LED wiring to light up the primary thruster and both main engines that are shown in flight position;
  • The cargo door located at the front can be opened and closed;
  • The version's scale corresponds with the 1:200 version of the Shuttle model that can be attached;
  • There are alternative vertical engines to display Serenity coming in to land (24_v2_turbine_2_vert_R; 26_v2_turbine_2_vert_L);
  • The main engine is also provided with an alternative cutting to light up the reactors and field generator housing. This version comes with reactor covers separated for you to print them with transparent filament;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:

  • Contains 27 parts;
  • A printed model is 115 mm tall, 128 mm wide, 195 mm deep;
  • Rear engine baffles 26_flap_big_x4 and 27_flap_small_x4 need to be printed 4 times each and will require glue for assembly;
  • Windows on the bridge are provided separately to be printed with the transparent filament for you to access the highly-detailed cockpit;
  • Tunnels throughout the spaceship's body are provided for LED wiring to light up the primary thruster;
  • The cargo door located at the front can be opened and closed;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

You can get the model of Serenity​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Serenity​ 3D Printing Model at Gambody YouTube channel.

Also, you may like the other Space Ships 3D Printing Models as well as Serenity Shuttle 3D Printing Model.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings