Premium Stock

T-800 Endoskeleton 3D Printing Figurine | Assembly + Action

(31)
cm: 21.7 w x 18.7 d x 47 h
in: 8.543 w x 7.362 d x 18.504 h

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

- 3 versions of T-800 Endoskeleton STL files for FFF/FDM and DLP/SLA/SLS - files for both versions are available for download after the purchase

- STL files of high-poly T-800 Endoskeleton 3D Figurine for 3D printing consist of 265 parts
- Sizes:
FFF/FDM, DLP/SLA/SLS: 470 mm tall, 217 mm wide, 187 mm deep

Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format
- Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print
- Full technical support from the Gambody Support Team

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_gun_body_R (repaired). stl
6.47 MiB 3 h 11 min 2 m 117 x 66 x 8 Download
_2_gun_body_L (repaired). stl
6.46 MiB 3 h 12 min 2 m 112 x 83 x 8 Download
_3_gun_top_1 (repaired).s tl
0.03 MiB 23 min <1 m 13 x 23 x 27 Download
_4_gun_top_2 (repaired).s tl
0.23 MiB 51 min 1 m 17 x 25 x 28 Download
_5_gun_front_1 (repaired) .stl
0.45 MiB 57 min <1 m 11 x 11 x 61 Download
_6_gun_front_2 (repaired) .stl
0.16 MiB 10 min <1 m 3 x 3 x 37 Download
_7_gun_front_3 (repaired) .stl
0.89 MiB 1 h 6 min <1 m 13 x 13 x 52 Download
_8_foot_R (repaired).stl
8.56 MiB 2 h 49 min 1 m 23 x 74 x 21 Download
_9_foot_connector_1_R (re paired).stl
0.18 MiB 51 min <1 m 7 x 8 x 97 Download
_10_foot_connector_2_R (r epaired).stl
0.42 MiB 1 h 28 min <1 m 6 x 7 x 98 Download
_11_foot_connector_3_R (r epaired).stl
0.42 MiB 1 h 26 min <1 m 6 x 7 x 98 Download
_12_foot_connector_4_R (r epaired).stl
0.44 MiB 1 h 21 min <1 m 8 x 8 x 99 Download
_13_shin_R (repaired).stl
4.74 MiB 7 h 6 min 5 m 31 x 40 x 114 Download
_14_shin_connector_R (rep aired).stl
0.10 MiB 17 min <1 m 26 x 20 x 13 Download
_15_leg_R (repaired).stl
23.64 MiB 7 h 26 min 5 m 29 x 41 x 130 Download
_16_leg_piston_a_1_R (rep aired).stl
1.20 MiB 52 min <1 m 14 x 13 x 51 Download
_17_leg_piston_a_2_R (rep aired).stl
0.21 MiB 9 min <1 m 17 x 42 x 4 Download
_18_leg_piston_a_3_R (rep aired).stl
0.30 MiB 3 min <1 m 13 x 6 x 3 Download
_19_leg_piston_b_1_R (rep aired).stl
1.27 MiB 53 min <1 m 13 x 13 x 53 Download
_20_leg_piston_b_2_R (rep aired).stl
0.19 MiB 8 min <1 m 15 x 38 x 4 Download
_21_leg_piston_b_3_R (rep aired).stl
0.30 MiB 3 min <1 m 13 x 4 x 3 Download
_22_leg_piston_c_1_R (rep aired).stl
1.12 MiB 1 h 19 min 1 m 14 x 14 x 65 Download
_23_leg_piston_c_2_R (rep aired).stl
0.27 MiB 9 min <1 m 7 x 46 x 4 Download
_24_leg_piston_c_3_R (rep aired).stl
0.28 MiB 3 min <1 m 11 x 4 x 3 Download
_25_pelvis_connector_1_R (repaired).stl
0.82 MiB 27 min <1 m 28 x 28 x 5 Download
_26_pelvis_connector_2_R (repaired).stl
0.46 MiB 22 min <1 m 37 x 15 x 11 Download
_27_foot_L (repaired).stl
8.56 MiB 2 h 48 min 1 m 23 x 74 x 21 Download
_28_foot_connector_1_L (r epaired).stl
0.18 MiB 51 min <1 m 7 x 8 x 97 Download
_29_foot_connector_2_L (r epaired).stl
0.42 MiB 1 h 26 min <1 m 6 x 7 x 98 Download
_30_foot_connector_3_L (r epaired).stl
0.42 MiB 1 h 27 min <1 m 6 x 7 x 98 Download
_31_foot_connector_4_L (r epaired).stl
0.44 MiB 1 h 2 min <1 m 8 x 8 x 99 Download
_32_shin_L (repaired).stl
4.74 MiB 7 h 6 min 5 m 31 x 40 x 114 Download
_33_shin_connector_L (rep aired).stl
0.10 MiB 17 min <1 m 26 x 20 x 13 Download
_34_leg_L (repaired).stl
23.64 MiB 7 h 22 min 4 m 29 x 41 x 130 Download
_35_leg_piston_a_1_L (rep aired).stl
1.20 MiB 52 min <1 m 13 x 13 x 51 Download
_36_leg_piston_a_2_L (rep aired).stl
0.21 MiB 9 min <1 m 13 x 43 x 4 Download
_37_leg_piston_a_3_L (rep aired).stl
0.30 MiB 3 min <1 m 13 x 6 x 3 Download
_38_leg_piston_b_1_L (rep aired).stl
1.29 MiB 1 h 3 min <1 m 14 x 13 x 53 Download
_39_leg_piston_b_2_L (rep aired).stl
0.19 MiB 8 min <1 m 22 x 35 x 4 Download
_40_leg_piston_b_3_L (rep aired).stl
0.30 MiB 3 min <1 m 13 x 4 x 3 Download
_41_leg_piston_c_1_L (rep aired).stl
1.13 MiB 1 h 6 min 1 m 14 x 14 x 65 Download
_42_leg_piston_c_2_L (rep aired).stl
0.27 MiB 9 min <1 m 7 x 46 x 4 Download
_43_leg_piston_c_3_L (rep aired).stl
0.28 MiB 3 min <1 m 11 x 4 x 3 Download
_44_pelvis_connector_1_L (repaired).stl
0.82 MiB 27 min <1 m 28 x 28 x 5 Download
_45_pelvis_connector_2_L (repaired).stl
0.46 MiB 22 min <1 m 37 x 15 x 11 Download
_46_shoulder_connector_1_ R (repaired).stl
0.39 MiB 20 min <1 m 35 x 16 x 6 Download
_47_shoulder_connector_2_ R (repaired).stl
0.25 MiB 16 min <1 m 22 x 23 x 5 Download
_48_shoulder_connector_3_ R (repaired).stl
0.04 MiB 16 min <1 m 28 x 28 x 2 Download
_49_shoulder_connector_4_ R (repaired).stl
0.09 MiB 24 min <1 m 8 x 8 x 29 Download
_50_shoulder_R (repaired) .stl
8.16 MiB 1 h 29 min 1 m 23 x 34 x 29 Download
_51_arm_piston_a_1_R (rep aired).stl
1.02 MiB 44 min <1 m 12 x 12 x 36 Download
_52_arm_piston_a_2_R (rep aired).stl
0.42 MiB 6 min <1 m 5 x 28 x 5 Download
_53_arm_piston_a_3_R (rep aired).stl
0.28 MiB 1 min <1 m 7 x 4 x 2 Download
_54_arm_piston_b_1_R (rep aired).stl
1.18 MiB 42 min <1 m 12 x 12 x 36 Download
_55_arm_piston_b_2_R (rep aired).stl
0.41 MiB 6 min <1 m 5 x 28 x 5 Download
_56_arm_piston_b_3_R (rep aired).stl
0.27 MiB 1 min <1 m 7 x 4 x 3 Download
_57_arm_connector_1_R (re paired).stl
0.36 MiB 16 min <1 m 29 x 20 x 6 Download
_58_arm_connector_2_R (re paired).stl
0.15 MiB 7 min <1 m 15 x 12 x 8 Download
_59_arm_R (repaired).stl
12.52 MiB 2 h 13 min 1 m 19 x 32 x 66 Download
_60_hand_R (repaired).stl
17.11 MiB 1 h 54 min 1 m 21 x 22 x 68 Download
_61_hand_connector_1_R (r epaired).stl
0.13 MiB 14 min <1 m 4 x 3 x 52 Download
_62_hand_connector_2_R (r epaired).stl
0.13 MiB 14 min <1 m 3 x 3 x 50 Download
_63_hand_connector_3_R (r epaired).stl
0.13 MiB 14 min <1 m 4 x 3 x 50 Download
_65_finger_a_x4_R (repair ed).stl
0.10 MiB 3 min <1 m 11 x 12 x 3 Download
_66_finger_b_x4_R (repair ed).stl
0.18 MiB 3 min <1 m 10 x 12 x 3 Download
_67_finger_c_R (repaired) .stl
0.10 MiB 3 min <1 m 10 x 12 x 3 Download
_68_finger_d_R (repaired) .stl
0.18 MiB 3 min <1 m 9 x 15 x 3 Download
_69_head_pipe_L (repaired ).stl
0.30 MiB 12 min <1 m 19 x 7 x 17 Download
_70_shoulder_connector_1_ L (repaired).stl
0.39 MiB 19 min <1 m 35 x 16 x 6 Download
_71_shoulder_connector_2_ L (repaired).stl
0.25 MiB 16 min <1 m 22 x 23 x 5 Download
_72_shoulder_connector_3_ L (repaired).stl
0.04 MiB 16 min <1 m 28 x 28 x 2 Download
_73_shoulder_connector_4_ L (repaired).stl
0.09 MiB 24 min <1 m 8 x 8 x 29 Download
_74_shoulder_L (repaired) .stl
8.16 MiB 1 h 29 min 1 m 23 x 34 x 29 Download
_75_arm_piston_a_1_L (rep aired).stl
1.02 MiB 44 min <1 m 12 x 12 x 36 Download
_76_arm_piston_a_2_L (rep aired).stl
0.41 MiB 6 min <1 m 5 x 28 x 5 Download
_77_arm_piston_a_3_L (rep aired).stl
0.28 MiB 1 min <1 m 7 x 4 x 2 Download
_78_arm_piston_b_1_L (rep aired).stl
1.18 MiB 44 min <1 m 12 x 12 x 36 Download
_79_arm_piston_b_2_L (rep aired).stl
0.41 MiB 6 min <1 m 5 x 28 x 5 Download
_80_arm_piston_b_3_L (rep aired).stl
0.27 MiB 1 min <1 m 7 x 4 x 2 Download
_81_arm_connector_1_L (re paired).stl
0.36 MiB 17 min <1 m 29 x 20 x 6 Download
_82_arm_connector_2_L (re paired).stl
0.15 MiB 7 min <1 m 15 x 12 x 8 Download
_83_arm_L (repaired).stl
12.52 MiB 2 h 15 min 1 m 19 x 32 x 66 Download
_84_hand_L (repaired).stl
17.12 MiB 1 h 52 min 1 m 21 x 22 x 68 Download
_85_hand_connector_1_L (r epaired).stl
0.13 MiB 14 min <1 m 4 x 3 x 52 Download
_86_hand_connector_2_L (r epaired).stl
0.13 MiB 14 min <1 m 3 x 3 x 50 Download
_87_hand_connector_3_L (r epaired).stl
0.13 MiB 14 min <1 m 3 x 3 x 50 Download
_89_finger_a_x4_L (repair ed).stl
0.10 MiB 3 min <1 m 11 x 12 x 4 Download
_90_finger_b_x4_L (repair ed).stl
0.18 MiB 3 min <1 m 10 x 12 x 3 Download
_91_finger_c_L (repaired) .stl
0.10 MiB 3 min <1 m 10 x 12 x 3 Download
_92_finger_d_L (repaired) .stl
0.18 MiB 3 min <1 m 9 x 15 x 3 Download
_93_pelvis_a (repaired).s tl
12.10 MiB 9 h 37 min 6 m 76 x 52 x 45 Download
_94_pelvis_b (repaired).s tl
0.01 MiB 30 min <1 m 12 x 44 x 9 Download
_95_pelvis_c (repaired).s tl
26.30 MiB 4 h 54 min 3 m 37 x 30 x 67 Download
_96_pelvis_d (repaired).s tl
0.40 MiB 26 min <1 m 13 x 13 x 29 Download
_97_pelvis_piston_1_R (re paired).stl
0.51 MiB 47 min <1 m 16 x 16 x 45 Download
_98_pelvis_piston_2_R (re paired).stl
0.45 MiB 49 min <1 m 10 x 10 x 48 Download
_99_pelvis_piston_1_L (re paired).stl
0.51 MiB 48 min <1 m 16 x 16 x 45 Download
_100_pelvis_piston_2_L (r epaired).stl
0.45 MiB 49 min <1 m 10 x 10 x 48 Download
_101_body_mechanism_1_R ( repaired).stl
14.57 MiB 4 h 28 min 3 m 37 x 44 x 52 Download
_102_body_mechanism_2_R ( repaired).stl
1.94 MiB 35 min <1 m 10 x 13 x 56 Download
_103_body_mechanism_3_R ( repaired).stl
0.11 MiB 13 min <1 m 4 x 4 x 43 Download
_104_body_mechanism_4_R ( repaired).stl
1.02 MiB 18 min <1 m 40 x 17 x 10 Download
_105_body_mechanism_5_R ( repaired).stl
1.03 MiB 20 min <1 m 43 x 32 x 11 Download
_107_body_mechanism_7_R ( repaired).stl
0.27 MiB 2 min <1 m 5 x 10 x 4 Download
_108_body_mechanism_8_R ( repaired).stl
0.77 MiB 29 min <1 m 7 x 6 x 29 Download
_111_body_mechanism_1_L ( repaired).stl
14.57 MiB 4 h 26 min 3 m 37 x 44 x 52 Download
_112_body_mechanism_2_L ( repaired).stl
1.94 MiB 29 min <1 m 9 x 13 x 56 Download
_113_body_mechanism_3_L ( repaired).stl
0.11 MiB 13 min <1 m 4 x 4 x 43 Download
_114_body_mechanism_4_L ( repaired).stl
1.01 MiB 18 min <1 m 40 x 17 x 10 Download
_115_body_mechanism_5_L ( repaired).stl
1.03 MiB 20 min <1 m 43 x 32 x 11 Download
_117_body_mechanism_7_L ( repaired).stl
0.27 MiB 2 min <1 m 5 x 10 x 4 Download
_118_body_mechanism_8_L ( repaired).stl
0.77 MiB 28 min <1 m 7 x 6 x 29 Download
_121_body (repaired).stl
54.46 MiB 31 h 49 min 19 m 99 x 76 x 123 Download
_122_body_back_R (repaire d).stl
9.87 MiB 1 h 6 min <1 m 34 x 15 x 48 Download
_123_body_back_L (repaire d).stl
9.87 MiB 1 h 8 min <1 m 34 x 15 x 48 Download
_124_body_back_connector_ x4 (repaired).stl
0.29 MiB 3 min <1 m 6 x 14 x 3 Download
_125_body_cap (repaired). stl
1.29 MiB 1 h 29 min 1 m 37 x 13 x 37 Download
_126_head_1 (repaired).st l
0.40 MiB 21 min <1 m 13 x 13 x 23 Download
_127_head_2 (repaired).st l
2.60 MiB 1 h 22 min 1 m 31 x 28 x 32 Download
_129_head_pipe_R (repaire d).stl
0.30 MiB 11 min <1 m 19 x 7 x 17 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
_106_body_mechanism_6_R ( repaired).stl
0.50 MiB 22 min <1 m 6 x 6 x 41 Download
_109_body_mechanism_9_R ( repaired).stl
0.77 MiB 22 min <1 m 25 x 14 x 21 Download
_110_body_mechanism_10_R (repaired).stl
0.41 MiB 18 min <1 m 6 x 6 x 23 Download
_116_body_mechanism_6_L ( repaired).stl
0.50 MiB 22 min <1 m 6 x 6 x 41 Download
_119_body_mechanism_9_L ( repaired).stl
0.77 MiB 22 min <1 m 25 x 14 x 21 Download
_120_body_mechanism_10_L (repaired).stl
0.41 MiB 17 min <1 m 6 x 6 x 23 Download
_64_wrist_R (repaired).st l
20.75 MiB 1 h 7 min <1 m 14 x 23 x 29 Download
_88_wrist_L (repaired).st l
20.75 MiB 1 h 5 min <1 m 14 x 23 x 29 Download
_128_head_3 (repaired).st l
16.74 MiB 7 h 25 min 4 m 36 x 55 x 42 Download
...

ABOUT THIS 3D FIGURINE

One of the most famous and awe-inspiring characters in the history of cinema, the Terminator was brought on the big screen by James Cameron’s nightmare in 1984 and since then the cybernetic organism hasn’t ceased to enjoy the status of pop culture icon. The T-800 Terminator constitutes a metal endoskeleton covered by living tissue that is capable of flawless termination and is resistant to almost any form of attack. Mass-produced by a military supercomputer Skynet, the cyborg assassin serves as a weapon with inhuman strength and infiltrating capabilities.

T-800 Endoskeleton figurine for 3D printing joins the Terminator representatives on our marketplace and offers you to 3D print a centrepiece to your sci-fi collection. The author of the model adopted an idea of preparing Endoskeleton’s most popular variant - the one inspired by Terminator 2: Judgment Day. Skynet’s most lethal weapon boasts a fantastic level of detail and can even be depicted holding a Westinghouse M95A1! Concealed inside each seemingly organic Terminator, the Endoskeleton demonstrates a chromed visage of a possible AI takeover that you have a chance to tame by 3D printing the formidable hyper-alloy combat chassis!

ADAPTATION FOR 3D PRINTING

T-800 Endoskeleton for 3D printing is a highly detailed action assembly figurine and its moderation and adaptation for different types of 3D printers took the Gambody team 65 hours in total. 

In order to preserve the accurate likeness of the iconic T-800 Endoskeleton, the model was divided into many parts that are to be assembled as if a real machine. Taking into account the willingness of our customers to make their 3D printing projects as true to life as possible, Gambody team worked on the highly-articulated assembly of the Endoskeleton that presupposes a variety of movable elements (please, see "Versions' specifications", "Assembly video" and photo preview slider). 

The cutting of the model was chosen to ensure the cleanest 3D printing result possible and to minimize the amount of material needed to print the generated support. All assembly parts are provided in STL files of FFF/FDM version in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to the T-800 Endoskeleton model.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the height of the T-800 Endoskeleton which is 1880 mm. The 3D printing model's chosen scale is 1:4 for FFF/FDM and DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 129 parts;
- A printed model is 470 mm tall, 217 mm wide, 187 mm deep;
- You can light up the model's eyesLED wiring can be easily installed throughout the neck and the head of the robot, while the battery can be hidden inside the chest;
- Thanks to the ball-and-claw joint, the head of the Endoskeleton rotates in all directions;
- Shoulder can be articulated via three joints with the help of a ratchet and connectors;
- Elbow bends via a ratchet and sets in motion two functioning shoulder pistons;
- Wrist rotates moderately via a ball-and-claw joint and sets in motion three functioning forearm pistons;
- Each Endoskeleton's finger bends via two phalanges;
- Upper body rotates in all directions via a large ball-and-claw joint located in the machine's waist;
- Rotation of the upper body sets in motion two functioning side pistons;
- Hip rotates in all directions via an adjustable grip connector and sets in motion three functioning thigh pistons;
Knee bends via a ratchet and can be locked in a preferred position;
- The assembly of some of Endeskeleton's parts requires additional “pins”. These pins do not come in STL files but can be made out of short pieces of regular 1.75mm filament;
Hydraulic cables that connect the model's parts are not provided with STL files. You may use the 1.75mm filament of your choice and insert its pieces into designated holes;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 136 parts;
- A printed model is 470 mm tall, 217 mm wide, 187 mm deep;
- You can light up the model's eyesLED wiring can be easily installed throughout the neck and the head of the robot, while the battery can be hidden inside the chest;
- Thanks to the ball-and-claw joint, the head of the Endoskeleton rotates in all directions;
- Shoulder can be articulated via three joints with the help of a ratchet and connectors;
- Elbow bends via a ratchet and sets in motion two functioning shoulder pistons;
- Wrist rotates moderately via a ball-and-claw joint and sets in motion three functioning forearm pistons;
- Each Endoskeleton's finger bends via two phalanges;
- Upper body rotates in all directions via a large ball-and-claw joint located in the machine's waist;
- Rotation of the upper body sets in motion two functioning side pistons;
- Hip rotates in all directions via an adjustable grip connector and sets in motion three functioning thigh pistons;
Poseable knee that can be locked in a preferred position;
- The assembly of some of Endeskeleton's parts requires additional “pins”. These pins can be made out of short pieces of regular 1.75mm filament, regular paper clips, or you can print the 1.75mm cylinders that come with STL files;
Hydraulic cables that connect the model's parts can be printed (they come already twisted in STL files), or made out of 1.75mm filament of your choice;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA/SLS Pre-supported 1.0 version features:
- Contains 136 parts;
- A printed model is 470 mm tall, 217 mm wide, 187 mm deep;
- The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
- You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
- When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

You can get the model of T-800 Endoskeleton for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble T-800 Endoskeleton 3D Printing Figurine at Gambody YouTube channel.

Also, you may like Terminator T-800 3D Printing Figurine, as well as other Terminator T-1000 variants for 3D Printing.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings