Premium Stock

Voltron (1984) 3D Printing Model | Assembly + Action

(6)
cm: 16.4 w x 16.4 d x 28.8 h
in: 6.457 w x 6.457 d x 11.339 h

Source Files

|

Description

|

Printing Details

This 3D Model consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Voltron (1984) 3D Printing Model comes in 2 versions for FFF/FDM and DLP/SLA/SLS 3D printers. STL files of the version are available for download after the purchase.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
_1_foot_R (repaired).stl
0.83 MiB 6 h 5 min 3 m 41 x 93 x 36 Download
_2_foot_L (repaired).stl
0.81 MiB 6 h 19 min 4 m 44 x 93 x 34 Download
_3_foot_connector_a_R (re paired).stl
0.99 MiB 10 min <1 m 19 x 18 x 7 Download
_4_foot_connector_b_R (re paired).stl
0.24 MiB 14 min <1 m 11 x 26 x 9 Download
_5_foot_connector_c_R (re paired).stl
1.56 MiB 36 min <1 m 19 x 19 x 17 Download
_6_foot_connector_a_L (re paired).stl
0.99 MiB 10 min <1 m 19 x 18 x 7 Download
_7_foot_connector_b_L (re paired).stl
0.24 MiB 14 min <1 m 11 x 26 x 9 Download
_8_foot_connector_c_L (re paired).stl
1.56 MiB 36 min <1 m 19 x 19 x 17 Download
_10_shin_L (repaired).stl
0.71 MiB 6 h 11 min 3 m 31 x 49 x 60 Download
_11_shin_connector_a_R (r epaired).stl
0.15 MiB 13 min <1 m 20 x 32 x 5 Download
_12_shin_connector_b_R (r epaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_13_shin_connector_c_R (r epaired).stl
0.07 MiB 11 min <1 m 15 x 19 x 5 Download
_14_shin_connector_a_L (r epaired).stl
0.15 MiB 13 min <1 m 20 x 32 x 5 Download
_15_shin_connector_b_L (r epaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_16_shin_connector_c_L (r epaired).stl
0.07 MiB 11 min <1 m 15 x 19 x 5 Download
_17_leg_R (repaired).stl
0.24 MiB 4 h 34 min 3 m 23 x 37 x 60 Download
_18_leg_L (repaired).stl
0.24 MiB 4 h 31 min 3 m 23 x 37 x 60 Download
_19_leg_connector_a_R (re paired).stl
0.99 MiB 10 min <1 m 18 x 19 x 7 Download
_20_leg_connector_b_R (re paired).stl
0.25 MiB 10 min <1 m 19 x 11 x 9 Download
_21_leg_connector_c_R (re paired).stl
1.55 MiB 34 min <1 m 19 x 19 x 16 Download
_22_leg_connector_a_L (re paired).stl
0.99 MiB 10 min <1 m 18 x 19 x 7 Download
_23_leg_connector_b_L (re paired).stl
0.25 MiB 10 min <1 m 19 x 11 x 9 Download
_24_leg_connector_c_L (re paired).stl
1.55 MiB 34 min <1 m 19 x 19 x 16 Download
_25_pelvis (repaired).stl
0.17 MiB 3 h 43 min 2 m 53 x 45 x 34 Download
_26_pelvis_badge (repaire d).stl
0.03 MiB 9 min <1 m 18 x 12 x 4 Download
_27_pelvis_connector_a (r epaired).stl
0.08 MiB 48 min <1 m 28 x 26 x 15 Download
_28_pelvis_connector_b (r epaired).stl
0.04 MiB 7 min <1 m 22 x 22 x 4 Download
_29_pelvis_connector_c (r epaired).stl
0.04 MiB 25 min <1 m 28 x 26 x 9 Download
_30_body (repaired).stl
0.52 MiB 12 h 31 min 8 m 80 x 47 x 50 Download
_31_body_for_LED (repaire d).stl
2.67 MiB 15 h 25 min 11 m 80 x 47 x 50 Download
_32_wing_a (repaired).stl
0.04 MiB 1 h 36 min 1 m 148 x 91 x 11 Download
_33_wing_pin (repaired).s tl
0.01 MiB 5 min <1 m 6 x 12 x 5 Download
_34_wing_b (repaired).stl
0.06 MiB 1 h 33 min 1 m 148 x 91 x 3 Download
_35_head_connector_a (rep aired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_36_head_connector_b (rep aired).stl
0.04 MiB 8 min <1 m 17 x 15 x 5 Download
_37_head_connector_c (rep aired).stl
0.18 MiB 14 min <1 m 17 x 15 x 9 Download
_38_head_base (repaired). stl
0.47 MiB 2 h 49 min 2 m 26 x 34 x 39 Download
_39_face (repaired).stl
1.28 MiB 25 min <1 m 15 x 27 x 14 Download
_40_head_base_for_LED (re paired).stl
0.48 MiB 2 h 54 min 2 m 26 x 34 x 39 Download
_41_face_for_LED (repaire d).stl
1.54 MiB 36 min <1 m 15 x 27 x 14 Download
_42_head_chin (repaired). stl
0.03 MiB 8 min <1 m 20 x 11 x 8 Download
_43_head_fang_R (repaired ).stl
0.33 MiB 1 min <1 m 2 x 3 x 8 Download
_44_head_fang_L (repaired ).stl
0.33 MiB 1 min <1 m 2 x 3 x 8 Download
_45_head_horn_R (repaired ).stl
0.05 MiB 12 min <1 m 7 x 14 x 12 Download
_46_head_horn_L (repaired ).stl
0.05 MiB 12 min <1 m 7 x 14 x 12 Download
_47_arm_connector_a_R (re paired).stl
0.99 MiB 10 min <1 m 18 x 19 x 7 Download
_48_arm_connector_b_R (re paired).stl
0.26 MiB 17 min <1 m 32 x 11 x 9 Download
_49_arm_connector_c_R (re paired).stl
1.55 MiB 36 min <1 m 19 x 19 x 17 Download
_50_arm_connector_d_R (re paired).stl
0.07 MiB 5 min <1 m 16 x 16 x 3 Download
_51_arm_R (repaired).stl
0.74 MiB 3 h 46 min 2 m 25 x 25 x 58 Download
_52_arm_connector_a_L (re paired).stl
0.99 MiB 10 min <1 m 18 x 19 x 7 Download
_53_arm_connector_b_L (re paired).stl
0.26 MiB 17 min <1 m 32 x 11 x 9 Download
_54_arm_connector_c_L (re paired).stl
1.55 MiB 36 min <1 m 19 x 19 x 17 Download
_55_arm_connector_d_L (re paired).stl
0.07 MiB 5 min <1 m 16 x 16 x 3 Download
_56_arm_L (repaired).stl
4.39 MiB 3 h 22 min 2 m 29 x 31 x 58 Download
_57_hand_connector_a_R (r epaired).stl
0.19 MiB 23 min <1 m 15 x 29 x 8 Download
_58_hand_connector_b_R (r epaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_59_hand_connector_c_R (r epaired).stl
0.06 MiB 16 min <1 m 15 x 27 x 6 Download
_60_hand_connector_a_L (r epaired).stl
0.16 MiB 11 min <1 m 17 x 15 x 8 Download
_61_hand_connector_b_L (r epaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_62_hand_connector_c_L (r epaired).stl
0.04 MiB 9 min <1 m 17 x 15 x 6 Download
_63_hand_R (repaired).stl
0.14 MiB 1 h 49 min 1 m 31 x 26 x 28 Download
_64_hand_L (repaired).stl
2.68 MiB 2 h 15 min 1 m 31 x 31 x 46 Download
_65_wrist_connector_a_R ( repaired).stl
0.17 MiB 18 min <1 m 17 x 15 x 18 Download
_66_wrist_connector_b_R ( repaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_67_wrist_connector_c_R ( repaired).stl
0.06 MiB 15 min <1 m 17 x 15 x 11 Download
_68_wrist_connector_a_L ( repaired).stl
0.17 MiB 18 min <1 m 17 x 15 x 18 Download
_69_wrist_connector_b_L ( repaired).stl
0.05 MiB 3 min <1 m 13 x 13 x 2 Download
_70_wrist_connector_c_L ( repaired).stl
0.06 MiB 15 min <1 m 17 x 15 x 11 Download
_71_wrist_a_R (repaired). stl
1.31 MiB 1 h 13 min 1 m 28 x 22 x 32 Download
_72_wrist_b_R (repaired). stl
0.80 MiB 26 min <1 m 27 x 10 x 19 Download
_73_wrist_L (repaired).st l
2.07 MiB 1 h 33 min 1 m 25 x 28 x 32 Download
_74_sword_a (repaired).st l
2.92 MiB 43 min <1 m 44 x 170 x 4 Download
_75_sword_pins (repaired) .stl
0.00 MiB 3 min <1 m 6 x 12 x 2 Download
_76_sword_b (repaired).st l
2.84 MiB 43 min <1 m 44 x 170 x 4 Download
_77_sword_c (repaired).st l
2.60 MiB 52 min 1 m 19 x 33 x 18 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
_9_shin_R (repaired).stl
0.44 MiB 6 h 12 min 3 m 34 x 44 x 60 Download
...

ABOUT THIS 3D MODEL

Voltron is an enormous super robot composed of Black, Red, Green, Blue, and Yellow robot lions joined together. Piloted by five space explorers, the titular robot Voltron defends the universe from evil witches and Robeasts in the course of the animated TV series franchise. And now, the mighty legend of the ’80s who is loved by good and feared by evil today becomes a part of Gambody’s anime selection for 3D printing! It may seem impossible to tame five robotic lions but the 3D artist behind the Voltron model easily coped with the task while dedicating circa 170 hours to complete the project! Particularly inspired by the original 1984 super robot, the author of the Voltron for 3D printing paid utmost attention to the design of each lion comprising the Defender of the Universe. Any fan of the classic anime series would also appreciate the artist’s approach to the armour details that the Voltron model is equipped with. Thus, a large star design adorns the robot’s belt and Voltron’s trademark chest plate depicts a crown with a cross underneath. A pair of large sturdy wings is attached to the back of a 3D printing super robot and the stare of Voltron’s helmeted head seems to be fixed on the upcoming threats. Last but not least, the awesome Blazing Sword that the red lion can be optionally displayed holding is an absolutely well-loved piece from the Voltron’s arsenal! The author of the model has also prepared a nice little shield to mount on the lion's head whenever you choose to display the robot wielding its ultimate weapon. 

"Ready to Form Voltron! Activate Interlocks, Dynotherms Connected, Infracells Up, Megathrusters are go...Let's Go Voltron! Form Feet and Legs, Form Arms and Body, and I'll Form the Head!!" … the iconic sequence can now we fulfilled by means of your 3D printer!

ADAPTATION FOR 3D PRINTING

Voltron (1984) model for 3D printing is a highly articulated assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 43 hours in total. In order to ensure the multidirectional movement of the robot, it was divided into many assembly parts and special mechanisms were introduced into all model’s joints to give you an opportunity to display Voltron in a variety of positions. Thus, the robot’s lion feet, hips, and shoulders are equipped with the new adjustable grip connector that comprises a ball-and-claw joint and a tightening nut. This connector enables a full rotation of the joint and allows you to control the grip by adjusting the tightening nut. For the articulated robot to stand firmly in any position you may choose there was a ratchet mechanism introduced in the model’s knees, body, elbow, lion hands, and head joints. We highly recommend that you watch the “Assembly video” to see the directions and the way that the robot’s joints move in. The assembly of the lower jaw of the model's right lion hand requires one additional “pin”. This pin does not come in the STL file but can be made out of a short piece of regular 1.75 PLA. In order for you to achieve the cleanest 3D printed result possible, Voltron’s Blazing sword and the back wings were split into two halves for their convenient placement on the build plate. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate. We highly recommend that you watch "Assembly video" in the photo preview section before assembling the Voltron. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the actual height of Voltron that is 60000 mm. The 3D printing model's chosen scale is 1/250 for the FFF/FDM version and 1/500 for the DLP/SLA/SLS version.

VERSION SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 77 parts;
- When printed the model stands 288 mm tall, 164 mm wide, 164 mm deep;
- Made with several sets of special connectors to ensure the model's articulation and multidirectional movement of the joints (Voltron's lion feetkneeshipsbody, shoulderselbowslion handshead, etc. are fully articulated);
- The model's lion feet, hips, and shoulders are assembled with the new adjustable grip connector that allows the full rotation of the ball-and-claw joints that you can control by adjusting the tightening nut;
- The ratchet mechanism in knees, body, elbow, lion hands and head joints ensures the robot's firm standing in any position you prefer; 
- There are two variants of the model's body, head and helmet - a classic and a hollow one for LEDs wiring;
- The assembly of the lower jaw of the model's right lion hand requires an additional “pin” that can be made out of a short piece of regular 1.75 PLA - watch the "Assembly video" to see the pin coloured red;
- We recommend that you watch the "Assembly video" and read the "Assembly Manual" before assembling the Super Robot;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA/SLS 1.0 version features:
- Contains 21 parts;
- A printed model is 144 mm tall, 82 mm wide, 82 mm deep;
- The version comes in three different static variants of Voltron's pose for you to choose from;
- The versions' assembly parts #1, 2, 3, 4, 5 and 6 are uniform for all pose variants of Voltron;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Voltron (1984) Model for 3D printing which consist of 98 parts;
2 versions of files for this model for FFF/FDM and DLP/SLA/SLS;
- High-poly detailed model of Voltron (1984)​​;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA/SLS 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the model of Voltron (1984)​​​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Voltron (1984)​ 3D Printing Model at Gambody YouTube channel.

Also, you may like other Robot 3D Printing Models, as well as Robotech Models for 3D Printing and Anime 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for CuraSimplify3D and Slic3r software.

Cura printing recommendations:

These are basic settings that were tested in Cura 4.8.0 slicer. 

The test models were printed on Ultimaker 2, Creality Ender 3, Creality CR-10S Pro V2, Anycubic I3 Mega, Anycubic I3 MegaS 3D printers with PLA and PETG filaments.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use and especially the particular assembly part at hand. Each part that any model comprises often needs preliminary review and you are free to tweak the settings the way you find suitable.

Note:
- You can scale up the model (downscaling is not recommended!);
- All connectors should be printed at 100% Infill;
- For all parts of locks (“ge_lock” in “Source files”) you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

Quality
Layer Height: 0.12 mm (you can also set Layer Height at 0.16 or 0.2mm for 0.4mm nozzles)
Initial Layer Height: 0.2 mm (carefully level the print bed and keep your Initial Layer Height the same as the main Layer Height)

Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
Wall Line Count: 2

Outer Wall Wipe Distance: 0.3 mm
Top Surface Skin Layers: 0

Top/Bottom Thickness: 0.6 mm
Top Thickness: 0.6 mm
Top Layers: 5
Bottom Thickness: 0.6 mm
Bottom Layers: 5
Initial Bottom Layers: 5

Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Optimize Wall Printing Order: Check

Compensate Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check

Minimum Wall Flow: 0%
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Hole horizontal expansion: 0

Z Seam Alignment: User Specified
Z Seam Position: Back
Z Seam X: Average length of your printer’s plate (e.g.”150” if your plate is 300mm on the X-axis)
Z Seam Y: A value higher than the length of your plate on the Y-axis (e.g. 700)

Seam Corner Preference: Hide Seam
Extra Skin Wall Count: 1
Skin Overlap Percentage: 10%
Skin Overlap 0.04 mm

Infill 
Infill Density: 20% (for all smaller parts and for all parts of connectors use 100% Infill)
Infill Pattern: Triangles
Connect Infill Lines: Check
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Line Multiplier: 1
Extra Infill Wall Count: 0

Infill Overlap Percentage: 10-20%
Infill Overlap: 0.04 mm

Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm

Infill Wipe Distance: 0 mm
Infill Layer Thickness: 0.24 mm
Gradual Infill Steps: 0
Infill Before Walls: Check
Minimum Infill Area: 0 mm2

Skin Removal Width: 0.8 mm
Top Skin Removal Width: 0.8 mm
Bottom Skin Removal Width: 0.8 mm

Skin Expand Distance: 0.8
Top Skin Expand Distance: 0.8
Bottom Skin Expand Distance: 0.8

Maximum Skin Angle for Expansion: 90Ëš
Minimum Skin Width for Expansion: 0.0
Skin Edge Support Thickness: 0
Skin Edge Support Layers: 0

Material 
Initial Layer Flow: 100%
Printing Temperature: See your filament settings
Initial Printing Temperature: Your filament settings
Final Printing Temperature: Your filament settings
Build Plate Temperature: Your filament settings
Build Plate Temperature Initial Layer: Your filament settings + 5°
Flow: 100% (Important! If you face difficulty printing the model, you may need to adjust the Flow parameter. You may research the topic using the Internet or seek assistance at our Customer Support Team at support@gambody.com)

Speed 

You can increase the printing Speed by 20% when you print simple objects. For small/thin parts you need to decrease the Speed by 25% - 50%.

Print Speed: 50 mm/s
    Infill Speed: 50 mm/s
    Wall Speed: 25 mm/s
          Outer Wall Speed:25 mm/s
          Inner Wall Speed: 50 mm/s

Top/Bottom Speed: 25mm/s
Support Speed: 25 mm/s 
          Support Infill Speed: 45 mm/s
          Support Interface Speed: 25 mm/s
                Support Roof Speed: 25 mm/s
                Support Floor Speed: 25 mm/s

Travel Speed: 80 mm/s
Initial Layer Speed: 80 mm/s
Initial Layer Print Speed: 20 mm/s
Initial Layer Travel Speed: 80 mm/s

Skirt/Brim Speed: 20 mm/s
Z  Hop Speed: 5 mm/s
Number of Slower Layers: 2
Enable Acceleration Control: Check

When printing simple objects, you need to set all Acceleration parameters at 500 mm/s. For small/thin parts you need to decrease the Acceleration by 50% - 70%.

Travel 
Enable Retraction: Check
Retraction Distance: 4-8 mm, 1-3 mm for Direct Extruder (This is the most important retraction parameter. You can find your optimal value of Retraction Distance by printing any test object, e.g. bridges, towers etc.)

Retraction Speed: 25mm/s
Retraction Retract Speed: 25 mm/s
Retraction Prime Speed: 25 mm/s

Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 1.5 mm
Maximum Retraction Count: 100
Minimum Extrusion Distance Window: 6,5 - 10 mm
Limit Support Retractions: Check
Combing Mode: All
Max Comb Distance With No Retract: 30 mm
Retract Before Outer Wall: Check
Avoid Printed Parts When Travelling: Check
Avoid Supports When Travelling: Check
Travel Avoid Distance: 1 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm
Z Hop When Retracted: Check
Z Hop Height: 0,3 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100% 

Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.36 mm
Regular Fan Speed at Layer: 3 

Minimum Layer Time: 10 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Structure: Normal (you can try using Tree Support Structure if you have difficulty printing any particular assembly part)
Support Placement: Everywhere 
Support Overhang Angle: 60° (this parameter can range from 30° to 70° depending on the part at hand)
Support Pattern: Zig Zag
Support Wall Line Count: 1 (stronger support that might be more difficult to remove) 0 (less strong support but is easier to remove)

Support Density: 15%
Support Line Distance: 2.6667 mm
Initial layer support line distance: 2.667 mm

Support Z Distance: 0.12 mm
Support Top Distance: 0.12 mm
Support Bottom Distance: 0.12 mm

Support X/Y Distance: 0.8-1 mm
Support Distance Priority: Z overrides X/Y
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Stair Step Minimum Slope Angle: 10°
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.2 mm
Gradual Support Infill Steps: 0
Minimum Support Area: 2 mm

Enable Support Interface: Check (generates additional “pillow” on the support structure that leads to a more even surface, but can be difficult to remove in hard-to-reach areas)
Enable Support Roof: Check
Enable Support Floor: Check

Support Interface Thickness: 0.8 mm
Support Roof Thickness: 0.8 mm
Support Floor Thickness: 0.8 mm

Support Interface Resolution 0.2 mm
Support Interface Density: 50-100%
        Support Roof Density: 50-100%
Support Roof Line Distance: 0.8 mm
        Support Floor Density: 50-100%
Support Floor line Distance:  0.4mm

Support Interface Pattern: Grid 
Support Roof Pattern: Grid (this parameter should differ from Bottom Pattern Initial Layer in “Shell” section)
Support Floor Pattern: Grid

Minimum Support Interface Area: 10mm
Minimum Support Roof Area: 10 mm
Minimum Support Floor Area: 10 mm

Support Interface Horizontal Expansion: 0.0 mm
Support Roof Horizontal Expansion: 0.0 mm
Support Floor Horizontal Expansion: 0.0 mm

Fan Speed Override: Check
Supported Skin Fan Speed: 100%
Use Towers: Check
Tower Diameter: 4 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Skirt/Brim (For unsteady parts, and those parts that may come unstuck use “Brim”. For bigger assembly parts that have large adhesion area and for all parts of locks and claws that you want to come out clean use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
       Brim Line Count: 10
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings