{"id":409,"date":"2014-12-03T11:27:48","date_gmt":"2014-12-03T11:27:48","guid":{"rendered":"http:\/\/gambody.com\/blog\/?p=409"},"modified":"2023-01-18T01:00:51","modified_gmt":"2023-01-17T23:00:51","slug":"useful-tips-for-3d-printer-settings-configuration-part3","status":"publish","type":"post","link":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/","title":{"rendered":"Useful tips for 3D printer settings configuration. Part3"},"content":{"rendered":"

Hi,<\/p>\n

We already know about\u00a0Model Positioning<\/a>\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0<\/a>, the only parameter is left is “Pattern”.<\/p>\n

“Pattern” <\/b>is the parameter\u00a0I would recommend you to pay your attention to,\u00a0\u00a0which is used to print out support structures and a raft. I advise you to use “rectilinear” -straight lines. It is enough for support structures and easy to remove from a printed model.<\/p>\n

<\/p>\n

Parameter Interface layers<\/em> – the amount of missed layers between the object and support structures’ material, this parameter is very important to fix all our support configurations.<\/p>\n

The increase of this parameter is used to ease the support structures removal. Too high value of this parameter can lead to supported elements’ deformation. If no value at all may lead to impossibility to remove the support structure from an element and even if you succeed to remove it the appearance of the model will leave a lot to be desired!<\/p>\n

I strongly recommend you to use 1 missed layer.<\/p>\n

\"Repetier-Host<\/a><\/p>\n

Finally we are ready with all the settings in “Print Settings” section. As for all the other settings in this section, we remain the same as they were pre-filled in Solidudle profile – Solidudle .3mm<\/p>\n

If speaking about two other sections – one is for material and another is for 3d printer you are using.<\/p>\n

Let me say just a few words:<\/p>\n

1. do not forget to put the correct temperature of your printer’s extruder and print bed. These settings can be found in the “Filament Settings” section.<\/p>\n

2. do not forget to put the correct size and the center point of your print bed. These settings can be found in the ” Printer Settings ” section.<\/p>\n

As soon as we are ready with Slicer’s settings, we close the window and move back to Repetier-Host Gambody software<\/p>\n

Make sure that each field contains the correct profile, the profile we have just made the changes to.<\/p>\n

In my case it looked like this:<\/p>\n

\"Repetier-Host<\/a><\/p>\n

If everything is correct press the big “Slice with Slic3r” button.<\/p>\n

The process may take from 2 minutes up to an hour or even more. It all depends on the size of a model and settings that you have specified for the Slicers (layer height<\/a>, support structures, infill), and of course the technical abilities of your PC – hardware. It took me 2 minutes, with all the \u00a0settings described, with the size set up at 50% from the original one. My hardware is: ssd, RAM -8 GB and not very powerful processor Intel Core i3 2.13 GHz.<\/p>\n

Once you have finished the slicing of your model and have a g-code, feel free to start printing the hero<\/a>!\u00a0(you can learn more here\u00a0)<\/p>\n

You can find my photo report below \ud83d\ude09<\/p>\n

\"3D<\/a><\/p>\n

\"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a><\/p>\n

\"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a><\/p>\n

\"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a><\/p>\n

\"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/p>\n

The photos below may show you the way it looks like when slicer and support structures settings are configured incorrectly!<\/strong><\/h4>\n

\"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a> \"3d<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is “Pattern”. “Pattern” is the parameter\u00a0I would recommend you to pay your attention to,\u00a0\u00a0which is used to print out support structures and a raft. I advise you to use “rectilinear” -straight lines. It is enough for support […]<\/p>\n","protected":false},"author":1,"featured_media":382,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[5],"tags":[8,7,77,92,67,75,94,93,78,66,69,68,70,76,71,73,74,72,79],"yoast_head":"\nUseful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog<\/title>\n<meta name=\"description\" content=\"Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is "Pattern". "Pattern" is the\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Useful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog\" \/>\n<meta property=\"og:description\" content=\"Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is "Pattern". "Pattern" is the\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/\" \/>\n<meta property=\"og:site_name\" content=\"Gambody, 3D Printing Blog\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/gambody\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/gambody\" \/>\n<meta property=\"article:published_time\" content=\"2014-12-03T11:27:48+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-01-17T23:00:51+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1600\" \/>\n\t<meta property=\"og:image:height\" content=\"1295\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@Gambody_com\" \/>\n<meta name=\"twitter:site\" content=\"@Gambody_com\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Gambody\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.gambody.com\/blog\/#organization\",\"name\":\"3D Print Models Marketplace\",\"url\":\"https:\/\/www.gambody.com\/blog\/\",\"sameAs\":[\"https:\/\/www.facebook.com\/gambody\",\"http:\/\/gambody3d\/\",\"https:\/\/www.linkedin.com\/company\/gambody\",\"https:\/\/www.youtube.com\/channel\/UCjeGrU5KaAldIXJpQ5xzObw\",\"http:\/\/www.pinterest.com\/gambody\/\",\"https:\/\/twitter.com\/Gambody_com\"],\"logo\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.gambody.com\/blog\/#logo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2016\/01\/256.png\",\"contentUrl\":\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2016\/01\/256.png\",\"width\":250,\"height\":250,\"caption\":\"3D Print Models Marketplace\"},\"image\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/#logo\"}},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.gambody.com\/blog\/#website\",\"url\":\"https:\/\/www.gambody.com\/blog\/\",\"name\":\"Gambody, 3D Printing Blog\",\"description\":\"3D Printing Tutorials and Tips Gambody\",\"publisher\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.gambody.com\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg\",\"contentUrl\":\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg\",\"width\":1600,\"height\":1295},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage\",\"url\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/\",\"name\":\"Useful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog\",\"isPartOf\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage\"},\"datePublished\":\"2014-12-03T11:27:48+00:00\",\"dateModified\":\"2023-01-17T23:00:51+00:00\",\"description\":\"Hi, We already know about\\u00a0Model Positioning\\u00a0and \\u00a0paid much attention to Skirt and Brim\\u00a0, the only parameter is left is \\\"Pattern\\\". \\\"Pattern\\\" is the\",\"breadcrumb\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.gambody.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Useful tips for 3D printer settings configuration. Part3\"}]},{\"@type\":\"Article\",\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage\"},\"author\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/#\/schema\/person\/8c4178d4ee7a1099c54e5e6862f79658\"},\"headline\":\"Useful tips for 3D printer settings configuration. Part3\",\"datePublished\":\"2014-12-03T11:27:48+00:00\",\"dateModified\":\"2023-01-17T23:00:51+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage\"},\"wordCount\":482,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg\",\"keywords\":[\"3D Models\",\"3D printing\",\"ABS\",\"g-code\",\"Layers\",\"Model Positioning\",\"Parameter Interface layers\",\"Pattern\",\"PLA\",\"Print Settings\",\"printbed\",\"Printing Technologies\",\"Repetier-Host\",\"scale\",\"Slicer\",\"stl\",\"stl files\",\"tips\",\"useful tips\"],\"articleSection\":[\"3D Printing News\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#respond\"]}]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.gambody.com\/blog\/#\/schema\/person\/8c4178d4ee7a1099c54e5e6862f79658\",\"name\":\"Gambody\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\/\/www.gambody.com\/blog\/#personlogo\",\"inLanguage\":\"en-US\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/064db9e65765be96a56c1b17a6f0ace0?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/064db9e65765be96a56c1b17a6f0ace0?s=96&d=mm&r=g\",\"caption\":\"Gambody\"},\"description\":\"A 3D printing website where users can buy and sell 3D printer files.\",\"sameAs\":[\"https:\/\/www.gambody.com\",\"https:\/\/www.facebook.com\/gambody\",\"https:\/\/twitter.com\/Gambody_com\"],\"url\":\"https:\/\/www.gambody.com\/blog\/author\/admin\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Useful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog","description":"Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is \"Pattern\". \"Pattern\" is the","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/","og_locale":"en_US","og_type":"article","og_title":"Useful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog","og_description":"Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is \"Pattern\". \"Pattern\" is the","og_url":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/","og_site_name":"Gambody, 3D Printing Blog","article_publisher":"https:\/\/www.facebook.com\/gambody","article_author":"https:\/\/www.facebook.com\/gambody","article_published_time":"2014-12-03T11:27:48+00:00","article_modified_time":"2023-01-17T23:00:51+00:00","og_image":[{"width":1600,"height":1295,"url":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_creator":"@Gambody_com","twitter_site":"@Gambody_com","twitter_misc":{"Written by":"Gambody","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Organization","@id":"https:\/\/www.gambody.com\/blog\/#organization","name":"3D Print Models Marketplace","url":"https:\/\/www.gambody.com\/blog\/","sameAs":["https:\/\/www.facebook.com\/gambody","http:\/\/gambody3d\/","https:\/\/www.linkedin.com\/company\/gambody","https:\/\/www.youtube.com\/channel\/UCjeGrU5KaAldIXJpQ5xzObw","http:\/\/www.pinterest.com\/gambody\/","https:\/\/twitter.com\/Gambody_com"],"logo":{"@type":"ImageObject","@id":"https:\/\/www.gambody.com\/blog\/#logo","inLanguage":"en-US","url":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2016\/01\/256.png","contentUrl":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2016\/01\/256.png","width":250,"height":250,"caption":"3D Print Models Marketplace"},"image":{"@id":"https:\/\/www.gambody.com\/blog\/#logo"}},{"@type":"WebSite","@id":"https:\/\/www.gambody.com\/blog\/#website","url":"https:\/\/www.gambody.com\/blog\/","name":"Gambody, 3D Printing Blog","description":"3D Printing Tutorials and Tips Gambody","publisher":{"@id":"https:\/\/www.gambody.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.gambody.com\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"ImageObject","@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage","inLanguage":"en-US","url":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg","contentUrl":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg","width":1600,"height":1295},{"@type":"WebPage","@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage","url":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/","name":"Useful tips for 3D printer settings configuration. Part3 - Gambody, 3D Printing Blog","isPartOf":{"@id":"https:\/\/www.gambody.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage"},"datePublished":"2014-12-03T11:27:48+00:00","dateModified":"2023-01-17T23:00:51+00:00","description":"Hi, We already know about\u00a0Model Positioning\u00a0and \u00a0paid much attention to Skirt and Brim\u00a0, the only parameter is left is \"Pattern\". \"Pattern\" is the","breadcrumb":{"@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.gambody.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Useful tips for 3D printer settings configuration. Part3"}]},{"@type":"Article","@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#article","isPartOf":{"@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage"},"author":{"@id":"https:\/\/www.gambody.com\/blog\/#\/schema\/person\/8c4178d4ee7a1099c54e5e6862f79658"},"headline":"Useful tips for 3D printer settings configuration. Part3","datePublished":"2014-12-03T11:27:48+00:00","dateModified":"2023-01-17T23:00:51+00:00","mainEntityOfPage":{"@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#webpage"},"wordCount":482,"commentCount":0,"publisher":{"@id":"https:\/\/www.gambody.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gambody.com\/blog\/wp-content\/uploads\/2014\/11\/IMG_0740-copy.jpg","keywords":["3D Models","3D printing","ABS","g-code","Layers","Model Positioning","Parameter Interface layers","Pattern","PLA","Print Settings","printbed","Printing Technologies","Repetier-Host","scale","Slicer","stl","stl files","tips","useful tips"],"articleSection":["3D Printing News"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.gambody.com\/blog\/useful-tips-for-3d-printer-settings-configuration-part3\/#respond"]}]},{"@type":"Person","@id":"https:\/\/www.gambody.com\/blog\/#\/schema\/person\/8c4178d4ee7a1099c54e5e6862f79658","name":"Gambody","image":{"@type":"ImageObject","@id":"https:\/\/www.gambody.com\/blog\/#personlogo","inLanguage":"en-US","url":"https:\/\/secure.gravatar.com\/avatar\/064db9e65765be96a56c1b17a6f0ace0?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/064db9e65765be96a56c1b17a6f0ace0?s=96&d=mm&r=g","caption":"Gambody"},"description":"A 3D printing website where users can buy and sell 3D printer files.","sameAs":["https:\/\/www.gambody.com","https:\/\/www.facebook.com\/gambody","https:\/\/twitter.com\/Gambody_com"],"url":"https:\/\/www.gambody.com\/blog\/author\/admin\/"}]}},"_links":{"self":[{"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/posts\/409"}],"collection":[{"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/comments?post=409"}],"version-history":[{"count":14,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/posts\/409\/revisions"}],"predecessor-version":[{"id":20104,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/posts\/409\/revisions\/20104"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/media\/382"}],"wp:attachment":[{"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/media?parent=409"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/categories?post=409"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.gambody.com\/blog\/wp-json\/wp\/v2\/tags?post=409"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}