{"id":7931,"date":"2019-11-22T13:17:42","date_gmt":"2019-11-22T11:17:42","guid":{"rendered":"https:\/\/www.gambody.com\/blog\/?p=7931"},"modified":"2026-03-27T14:45:22","modified_gmt":"2026-03-27T12:45:22","slug":"how-to-change-nozzle-on-3d-printer","status":"publish","type":"post","link":"https:\/\/www.gambody.com\/blog\/how-to-change-nozzle-on-3d-printer\/","title":{"rendered":"How to Change Nozzle on 3D Printer from 0.4mm to 0.8mm"},"content":{"rendered":"\n

Some 3D printing enthusiasts love to experiment with their device settings and materials. Thus, crazyfilament discussed his fantastic experiments with filament<\/a> in the interview with Gambody. And in case you are thinking of adding some upgrades to your TEVO Tornado, Creality CR-10, Ultimaker or another machine, it is handy to learn about nozzle replacement. Gambody decided to share a simple guide on how to change a nozzle on a 3D printer from 0.4mm to 0.8mm.<\/p>\n\n\n\n\n\n\n\n

But before you get into the details, it is best to look closer at both options and compare 0.4 vs 0.8 mm nozzle. This way, you will know the difference and figure out for yourself whether you need this 3D printer HotEnd tip change or not.<\/p>\n\n\n\n

0.4 vs 0.8 mm Nozzle<\/h2>\n\n\n\n

When it comes to replacing the 0.4mm diameter for 0.8mm, it is best to compare these two HotEnd tip options:<\/p>\n\n\n\n

\"0.4
Image source: Hoffman Engineering (YouTube)<\/figcaption><\/figure>\n\n\n\n

As you might know, the layer height depends a lot on the HotEnd tip diameter. Hobbyists believe that for best 3D printing experience, the height should be up to 80 per cent of the tip width. In other words, if you are using the standard 0.4mm nozzle, the maximum layer height you can go with is 0.32mm. With a 0.8mm diameter, this parameter can grow up to 0.64mm.<\/p>\n\n\n\n

The grown layer height also increases print speed. You can make models on your 3D printer much faster, and your projects can be way more massive than before.<\/p>\n\n\n\n

\"Guide<\/figure>\n\n\n\n

0.4 mm Nozzle Replacement: How to<\/h2>\n\n\n\n

Follow the instruction on how to change HotEnd tip on a 3D printer from 0.4mm to 0.8mm. Everything seems to be very straightforward.<\/p>\n\n\n\n

It is possible to perform this change on different 3D printers, including Creality Ender-3, Creality CR-10, CR-10S, TEVO Tornado and other machines. Just be sure to find the correct kits, be patient and extra careful.<\/p>\n\n\n\n

Step 1. Find a Nozzle Kit<\/h3>\n\n\n\n

Firstly, it is a must to get a replacement kit for your 3D printer. Most printers use standard size thread for the nozzle. Thus, it should not matter if you have a Creality CR-10 or TEVO Tornado. You can go with any standard kit by SIQUK, Glarks, LUTER or any other company you trust. Read reviews shared by other customers and find the equipment you will like the most.<\/p>\n\n\n\n

\"Standard
Image source: Amazon<\/figcaption><\/figure>\n\n\n\n

Many kits come with a storage box, cleaning needles and other little extras.<\/p>\n\n\n\n

It is probably better to get high-quality materials and avoid using cheap products. Still, even affordable replacement equipment can often be suitable.<\/p>\n\n\n\n

Step 2. Tools<\/h3>\n\n\n\n

3D printer nozzle change requires you getting to the HotEnd. Thus, you have to get a set of tools for your device, including wrench for the size of your HotEnd tip (a 6mm tool is excellent for this how-to guide).<\/p>\n\n\n\n

\"Tools
Image source: Hoffman Engineering (YouTube)<\/figcaption><\/figure>\n\n\n\n

It is also a great idea to get Kapton tape for this project. It is perfect for sealing everything and keeping the details isolated when needed.<\/p>\n\n\n\n

Step 3. Get Access to the HotEnd<\/h3>\n\n\n\n

Before you can change a nozzle on a 3D printer, it is a must to access the device\u2019s HotEnd by undoing screws and disassembling some parts of the machine.<\/p>\n\n\n\n

\"How
Image source: Hoffman Engineering (YouTube)<\/figcaption><\/figure>\n\n\n\n

Once you get to the heater block, you should be extra careful. Do not scratch the block. Try to keep isolation on its place (if this is possible).<\/p>\n\n\n\n

It is also required to heat the HotEnd to help loosen the old tip and remove it. You are highly advised to perform such manipulations only if you are familiar with how the 3D printer works and if you know how to work with high temperatures.<\/p>\n\n\n\n

Step 4. 0.4 mm Nozzle Replacement<\/h3>\n\n\n\n
\"0.4
Image source: Hoffman Engineering (YouTube)<\/figcaption><\/figure>\n\n\n\n

Use the wrench to remove the old 0.4mm tip. It should not be too difficult.<\/p>\n\n\n\n

Now take the new 0.8mm nozzle and gently twist it on. If you are doing this with your hand, avoid getting a burn from the heated block. Make sure to tighten the tip.<\/p>\n\n\n\n

Step 5. Reassemble the HotEnd<\/h3>\n\n\n\n
\"3D
Image source: Hoffman Engineering (YouTube)<\/figcaption><\/figure>\n\n\n\n

Screw everything back on with the new 0.8mm nozzle already replaced.<\/p>\n\n\n\n

Test the way the filament is running. Make sure you have no leaks.<\/p>\n\n\n\n

Step 6. Enjoy Your Upgrade<\/h3>\n\n\n\n

In Cure software (if you are using it), go to Advanced Settings and set up your new nozzle size to 0.8mm diameter. Adjust the Z-axis, layer height, and you can start 3D printing your new projects.<\/p>\n\n\n\n

The process of how to change a nozzle on a 3D printer from 0.4mm to 0.8mm is best described on the video by Hoffman Engineering:<\/em><\/strong><\/p>\n\n\n\n

\n