Community 
es 
ua 
<< Back to previous page | Community \ Prints \ Just Finished the Daishi - Dire Wolf 100 ton Clanner Mech
Just Finished the Daishi - Dire Wolf 100 ton Clanner Mech
Daishi Front Right
My completed Laser Boat Daishi (Does not Exist in the game) From the Front Right side
Daishi Back right
My completed Laser Boat Daishi (Does not Exist in the game) from the right rear side
Daishi Top Front Downward
Laser Boat Daishi (Does not Exist in the game) looking downwards from the top front
Laser Boat Daishi (Does not Exist in the game) Left side Detail image
the modded Ballistics pack I am working on
Let me know if I can upload these I would love to share
The Daishi (Dire Wolf) P — Forest Camo Build
I bought this model a couple of weeks ago. As soon as I realized a new mech had been released—and that it was the Daishi—I knew I had to have it! The Daishi has been my favorite 100-ton Clan mech for many, many years. So, naturally, I HAD TO HAVE IT!
For the past two weeks, I've been slicing, planning, and working out the paint scheme, using screenshots from MechWarrior 5: Mercenaries as reference. I went with a custom forest-camo color scheme that I use on the mechs in my own collection.
I also special-ordered the Blue Steel filament from Kexcelled. I say special-ordered because I primarily use Sunlu filament, where I can usually get refill rolls for around $10.99–$13.99. The Kexcelled Blue Steel rolls cost $25.99 each, and I bought two. A bit of a splurge, but I think the results were worth it!
The Print
This build was printed on my Bambu Lab P1S Combo setup. I run two P1S machines: one equipped with an AMS and the other with an AMS 2 Pro.
The primary filaments used were:
Sunlu PLA+: Coffee Brown, Olive Green, and Oak
Sunlu PLA+: Klein Blue and Red for highlights
Sunlu PLA+ Silk: Silver
Kexcelled: Blue Steel
Planned Modifications
I'm planning to remove the lasers from the arms and replace them with a pair of Gauss rifles, bringing the configuration closer to the DWF-P.
Dire Wolf P — Hardpoint Configuration
Head: 1 Missile
Left Torso: 3 Energy
Right Torso: 1 Energy, 1 AMS
Left Arm: 1 Energy, 1 Omni slot
Right Arm: 1 Energy, 1 Omni slot
This has been a fun build to plan and bring together, and that Blue Steel filament really makes the extra expense worthwhile. The Daishi has always been a favorite of mine, so getting this version printed in my own forest-camo scheme makes it that much more special.
I bought this model a couple of weeks ago. As soon as I realized a new mech had been released—and that it was the Daishi—I knew I had to have it! The Daishi has been my favorite 100-ton Clan mech for many, many years. So, naturally, I HAD TO HAVE IT!
For the past two weeks, I've been slicing, planning, and working out the paint scheme, using screenshots from MechWarrior 5: Mercenaries as reference. I went with a custom forest-camo color scheme that I use on the mechs in my own collection.
I also special-ordered the Blue Steel filament from Kexcelled. I say special-ordered because I primarily use Sunlu filament, where I can usually get refill rolls for around $10.99–$13.99. The Kexcelled Blue Steel rolls cost $25.99 each, and I bought two. A bit of a splurge, but I think the results were worth it!
The Print
This build was printed on my Bambu Lab P1S Combo setup. I run two P1S machines: one equipped with an AMS and the other with an AMS 2 Pro.
The primary filaments used were:
Sunlu PLA+: Coffee Brown, Olive Green, and Oak
Sunlu PLA+: Klein Blue and Red for highlights
Sunlu PLA+ Silk: Silver
Kexcelled: Blue Steel
Planned Modifications
I'm planning to remove the lasers from the arms and replace them with a pair of Gauss rifles, bringing the configuration closer to the DWF-P.
Dire Wolf P — Hardpoint Configuration
Head: 1 Missile
Left Torso: 3 Energy
Right Torso: 1 Energy, 1 AMS
Left Arm: 1 Energy, 1 Omni slot
Right Arm: 1 Energy, 1 Omni slot
This has been a fun build to plan and bring together, and that Blue Steel filament really makes the extra expense worthwhile. The Daishi has always been a favorite of mine, so getting this version printed in my own forest-camo scheme makes it that much more special.
The Daishi (Dire Wolf) P — Forest Camo Build
I bought this model a couple of weeks ago. As soon as I realized a new mech had been released—and that it was the Daishi—I knew I had to have it! The Daishi has been my favorite 100-ton Clan mech for many, many years. So, naturally, I HAD TO HAVE IT!
For the past two weeks, I've been slicing, planning, and working out the paint scheme, using screenshots from MechWarrior 5: Mercenaries as reference. I went with a custom forest-camo color scheme that I use on the mechs in my own collection.
I also special-ordered the Blue Steel filament from Kexcelled. I say special-ordered because I primarily use Sunlu filament, where I can usually get refill rolls for around $10.99–$13.99. The Kexcelled Blue Steel rolls cost $25.99 each, and I bought two. A bit of a splurge, but I think the results were worth it!
The Print
This build was printed on my Bambu Lab P1S Combo setup. I run two P1S machines: one equipped with an AMS and the other with an AMS 2 Pro.
The primary filaments used were:
Sunlu PLA+: Coffee Brown, Olive Green, and Oak
Sunlu PLA+: Klein Blue and Red for highlights
Sunlu PLA+ Silk: Silver
Kexcelled: Blue Steel
Planned Modifications
I'm planning to remove the lasers from the arms and replace them with a pair of Gauss rifles, bringing the configuration closer to the DWF-P.
Dire Wolf P — Hardpoint Configuration
Head: 1 Missile
Left Torso: 3 Energy
Right Torso: 1 Energy, 1 AMS
Left Arm: 1 Energy, 1 Omni slot
Right Arm: 1 Energy, 1 Omni slot
This has been a fun build to plan and bring together, and that Blue Steel filament really makes the extra expense worthwhile. The Daishi has always been a favorite of mine, so getting this version printed in my own forest-camo scheme makes it that much more special.
I bought this model a couple of weeks ago. As soon as I realized a new mech had been released—and that it was the Daishi—I knew I had to have it! The Daishi has been my favorite 100-ton Clan mech for many, many years. So, naturally, I HAD TO HAVE IT!
For the past two weeks, I've been slicing, planning, and working out the paint scheme, using screenshots from MechWarrior 5: Mercenaries as reference. I went with a custom forest-camo color scheme that I use on the mechs in my own collection.
I also special-ordered the Blue Steel filament from Kexcelled. I say special-ordered because I primarily use Sunlu filament, where I can usually get refill rolls for around $10.99–$13.99. The Kexcelled Blue Steel rolls cost $25.99 each, and I bought two. A bit of a splurge, but I think the results were worth it!
The Print
This build was printed on my Bambu Lab P1S Combo setup. I run two P1S machines: one equipped with an AMS and the other with an AMS 2 Pro.
The primary filaments used were:
Sunlu PLA+: Coffee Brown, Olive Green, and Oak
Sunlu PLA+: Klein Blue and Red for highlights
Sunlu PLA+ Silk: Silver
Kexcelled: Blue Steel
Planned Modifications
I'm planning to remove the lasers from the arms and replace them with a pair of Gauss rifles, bringing the configuration closer to the DWF-P.
Dire Wolf P — Hardpoint Configuration
Head: 1 Missile
Left Torso: 3 Energy
Right Torso: 1 Energy, 1 AMS
Left Arm: 1 Energy, 1 Omni slot
Right Arm: 1 Energy, 1 Omni slot
This has been a fun build to plan and bring together, and that Blue Steel filament really makes the extra expense worthwhile. The Daishi has always been a favorite of mine, so getting this version printed in my own forest-camo scheme makes it that much more special.
FFF/FDM printing: Bambu Lab P1S
Silk PLA (Kexcelled Blue Steel), PLA (Sunlu Black), PLA (Sunlu Coffee Brown), PLA (Sunlu Klein Blue), PLA (Sunlu Oak Biege), PLA (Sunlu Olive Green), PLA (Sunlu Red), Silk PLA (Sunlu Silver)
Printing time: 2.5 days of Printing
Painting time: 9 days
28 October 2026
0
0
