Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
Mesh error check
Netfabb
Support
Lifetime support from Gambody team
Update requests
Available to verified buyers
Model versions
FFF/FDM
Assembly method
Connectors, Glue
Features
- Symmetrical, snowflake-shaped city-ship layout with six piers, recessed bays, and central spires.
- Detailed outer decks with raised walkways, mechanical paneling, and perimeter stabilizer fins.
- Pier-end circular bay hatches with two assembly options: open or closed.
- Full hollow internal routing and perforated tower facades engineered for maximum LED lighting across interior channels and buildings.
- Hexagonal display stand with an optional, repositionable "Stargate Atlantis" nameplate.
- The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots. Optionally, for added strength and rigidity, the static connections can be glued together.
- Some model parts use separate connectors (part "_37_pin_V1_X162_FDM" requires 162 copies; part "_72_pin_V2_X3_FDM" requires 3 copies).
DLP/SLA
Assembly method
Connectors, Glue
Features
- Please note: The DLP/SLA PDF assembly guide is currently being finalized and will be available as soon as possible.
- Symmetrical, snowflake-shaped city-ship layout with six piers, recessed bays, and central spires.
- Detailed outer decks with raised walkways, mechanical paneling, and perimeter stabilizer fins.
- Pier-end circular bay hatches with two assembly options: open or closed.
- Simplified assembly achieved by merging several structural elements together, resulting in more limited internal LED lighting capabilities compared to the FFF/FDM-adapted version.
- Hexagonal display stand with an optional, repositionable "Stargate Atlantis" nameplate.
- Resin maker tip: For enthusiasts seeking full lighting detail at a smaller footprint, the FFF/FDM "1.0 Initial" files can be printed on a resin printer at 50% scale (note that this significantly increases assembly complexity).
- The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots. Optionally, for added strength and rigidity, the static connections can be glued together.
- Some model parts use separate connectors (part "_37_pin_V1_X162_SLA" requires 162 copies; part "_83_pin_V2_X3_SLA" requires 3 copies).
Additional details
Part of diorama
No
Add-on pack available
No
You will get instant access to the STL files of Atlantis Stargate 3D Printer Files | Assembly after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Atlantis Stargate 3D Printer Files | Assembly, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Atlantis Stargate 3D Printer Files | Assembly includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
| File name | Size (mm | in) | Size(mb) | Printing Time / Filament | |||
|---|---|---|---|---|---|---|
_01_centralPart_a_FDM (repaired).stl 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | Size: 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | File size: 6.76 mb | Printing Time / Filament: 18 h 47 min / 142 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_02_centralPart_b_FDM (repaired).stl 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | Size: 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | File size: 7.14 mb | Printing Time / Filament: 19 h 38 min / 149 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_03_centralPart_c_FDM (repaired).stl 143.5 x 150.8 x 158.1 mm | 5.65 x 5.94 x 6.22 in | Size: 143.5 x 150.8 x 158.1 mm | 5.65 x 5.94 x 6.22 in | File size: 7.04 mb | Printing Time / Filament: 19 h 20 min / 144 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_04_centralPart_d_FDM (repaired).stl 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | Size: 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | File size: 6.77 mb | Printing Time / Filament: 18 h 53 min / 145 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_05_centralPart_e_FDM (repaired).stl 152.4 x 143.5 x 158.1 mm | 6 x 5.65 x 6.22 in | Size: 152.4 x 143.5 x 158.1 mm | 6 x 5.65 x 6.22 in | File size: 6.80 mb | Printing Time / Filament: 18 h 56 min / 143 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_06_centralPart_f_FDM (repaired).stl 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | Size: 150.8 x 143.5 x 158.1 mm | 5.94 x 5.65 x 6.22 in | File size: 7.00 mb | Printing Time / Filament: 18 h 51 min / 144 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_07_centralPart_g_FDM (repaired).stl 189.2 x 191.1 x 28.5 mm | 7.45 x 7.52 x 1.12 in | Size: 189.2 x 191.1 x 28.5 mm | 7.45 x 7.52 x 1.12 in | File size: 46.92 mb | Printing Time / Filament: 4 h 32 min / 38 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_08_centralPart_h_FDM (repaired).stl 189.2 x 191.1 x 28.5 mm | 7.45 x 7.52 x 1.12 in | Size: 189.2 x 191.1 x 28.5 mm | 7.45 x 7.52 x 1.12 in | File size: 56.72 mb | Printing Time / Filament: 4 h 53 min / 41 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_09_centralPart_i_FDM (repaired).stl 189.2 x 189.2 x 28.5 mm | 7.45 x 7.45 x 1.12 in | Size: 189.2 x 189.2 x 28.5 mm | 7.45 x 7.45 x 1.12 in | File size: 69.87 mb | Printing Time / Filament: 4 h 54 min / 40 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_10_largeSection_a_FDM (repaired).stl 124 x 201.3 x 217.7 mm | 4.88 x 7.93 x 8.57 in | Size: 124 x 201.3 x 217.7 mm | 4.88 x 7.93 x 8.57 in | File size: 11.97 mb | Printing Time / Filament: 32 h 46 min / 230 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_11_largeSection_b_FDM (repaired).stl 90.1 x 183 x 207.2 mm | 3.55 x 7.2 x 8.16 in | Size: 90.1 x 183 x 207.2 mm | 3.55 x 7.2 x 8.16 in | File size: 10.40 mb | Printing Time / Filament: 19 h 21 min / 143 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_12_largeSection_c_FDM (repaired).stl 91.5 x 118.5 x 149.5 mm | 3.6 x 4.67 x 5.89 in | Size: 91.5 x 118.5 x 149.5 mm | 3.6 x 4.67 x 5.89 in | File size: 3.99 mb | Printing Time / Filament: 6 h 29 min / 46 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_13_largeSection_d_FDM (repaired).stl 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | Size: 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | File size: 9.86 mb | Printing Time / Filament: 8 h 21 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_14_largeSection_e_FDM (repaired).stl 91.5 x 118.5 x 149.5 mm | 3.6 x 4.67 x 5.89 in | Size: 91.5 x 118.5 x 149.5 mm | 3.6 x 4.67 x 5.89 in | File size: 3.97 mb | Printing Time / Filament: 6 h 26 min / 46 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_15_largeSection_f_FDM (repaired).stl 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | Size: 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | File size: 9.77 mb | Printing Time / Filament: 8 h 17 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_16_largeSection_g_FDM (repaired).stl 124 x 185.7 x 217.7 mm | 4.88 x 7.31 x 8.57 in | Size: 124 x 185.7 x 217.7 mm | 4.88 x 7.31 x 8.57 in | File size: 13.09 mb | Printing Time / Filament: 31 h 23 min / 219 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_17_largeSection_h_FDM (repaired).stl 182.9 x 90.1 x 159.1 mm | 7.2 x 3.55 x 6.26 in | Size: 182.9 x 90.1 x 159.1 mm | 7.2 x 3.55 x 6.26 in | File size: 8.76 mb | Printing Time / Filament: 15 h 54 min / 122 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_18_largeSection_i_FDM (repaired).stl 91.5 x 212.3 x 149.7 mm | 3.6 x 8.36 x 5.89 in | Size: 91.5 x 212.3 x 149.7 mm | 3.6 x 8.36 x 5.89 in | File size: 4.61 mb | Printing Time / Filament: 8 h 7 min / 62 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_19_largeSection_j_FDM (repaired).stl 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | Size: 86.4 x 150.8 x 158.5 mm | 3.4 x 5.94 x 6.24 in | File size: 9.95 mb | Printing Time / Filament: 8 h 22 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_20_largeSection_k_FDM (repaired).stl 96.3 x 118.5 x 182 mm | 3.79 x 4.67 x 7.17 in | Size: 96.3 x 118.5 x 182 mm | 3.79 x 4.67 x 7.17 in | File size: 5.79 mb | Printing Time / Filament: 7 h 23 min / 51 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_21_largeSection_l_FDM (repaired).stl 92.2 x 150.8 x 158.5 mm | 3.63 x 5.94 x 6.24 in | Size: 92.2 x 150.8 x 158.5 mm | 3.63 x 5.94 x 6.24 in | File size: 9.95 mb | Printing Time / Filament: 8 h 38 min / 59 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_22_largeSection_m_FDM (repaired).stl 124 x 185.7 x 217.7 mm | 4.88 x 7.31 x 8.57 in | Size: 124 x 185.7 x 217.7 mm | 4.88 x 7.31 x 8.57 in | File size: 13.23 mb | Printing Time / Filament: 31 h 51 min / 219 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_23_largeSection_n_FDM (repaired).stl 92.9 x 182.9 x 159.1 mm | 3.66 x 7.2 x 6.26 in | Size: 92.9 x 182.9 x 159.1 mm | 3.66 x 7.2 x 6.26 in | File size: 8.72 mb | Printing Time / Filament: 16 h 26 min / 119 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_24_largeSection_o_FDM (repaired).stl 118.5 x 91.5 x 149.5 mm | 4.67 x 3.6 x 5.89 in | Size: 118.5 x 91.5 x 149.5 mm | 4.67 x 3.6 x 5.89 in | File size: 3.96 mb | Printing Time / Filament: 6 h 39 min / 47 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_25_largeSection_p_FDM (repaired).stl 150.8 x 86.4 x 158.5 mm | 5.94 x 3.4 x 6.24 in | Size: 150.8 x 86.4 x 158.5 mm | 5.94 x 3.4 x 6.24 in | File size: 9.91 mb | Printing Time / Filament: 8 h 23 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_26_largeSection_q_FDM (repaired).stl 143.9 x 91.5 x 150.6 mm | 5.67 x 3.6 x 5.93 in | Size: 143.9 x 91.5 x 150.6 mm | 5.67 x 3.6 x 5.93 in | File size: 5.19 mb | Printing Time / Filament: 8 h 6 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_27_largeSection_r_FDM (repaired).stl 150.8 x 86.4 x 158.5 mm | 5.94 x 3.4 x 6.24 in | Size: 150.8 x 86.4 x 158.5 mm | 5.94 x 3.4 x 6.24 in | File size: 9.77 mb | Printing Time / Filament: 8 h 21 min / 57 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_28_smallSection_a_FDM (repaired).stl 108.4 x 167.3 x 174.8 mm | 4.27 x 6.59 x 6.88 in | Size: 108.4 x 167.3 x 174.8 mm | 4.27 x 6.59 x 6.88 in | File size: 7.83 mb | Printing Time / Filament: 17 h 41 min / 119 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_29_smallSection_b_FDM (repaired).stl 157.3 x 82 x 238 mm | 6.19 x 3.23 x 9.37 in | Size: 157.3 x 82 x 238 mm | 6.19 x 3.23 x 9.37 in | File size: 8.74 mb | Printing Time / Filament: 14 h 59 min / 93 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_30_smallSection_c_FDM (repaired).stl 157.3 x 82.2 x 238.1 mm | 6.19 x 3.24 x 9.37 in | Size: 157.3 x 82.2 x 238.1 mm | 6.19 x 3.24 x 9.37 in | File size: 8.42 mb | Printing Time / Filament: 14 h 44 min / 91 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_31_smallSection_d_FDM (repaired).stl 108.4 x 228.8 x 174.8 mm | 4.27 x 9.01 x 6.88 in | Size: 108.4 x 228.8 x 174.8 mm | 4.27 x 9.01 x 6.88 in | File size: 7.25 mb | Printing Time / Filament: 19 h 32 min / 138 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_32_smallSection_e_FDM (repaired).stl 82.1 x 95.6 x 238.1 mm | 3.23 x 3.76 x 9.37 in | Size: 82.1 x 95.6 x 238.1 mm | 3.23 x 3.76 x 9.37 in | File size: 6.39 mb | Printing Time / Filament: 10 h 33 min / 67 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_33_smallSection_f_FDM (repaired).stl 81.9 x 157.3 x 238.1 mm | 3.22 x 6.19 x 9.37 in | Size: 81.9 x 157.3 x 238.1 mm | 3.22 x 6.19 x 9.37 in | File size: 7.95 mb | Printing Time / Filament: 13 h 31 min / 91 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_34_smallSection_g_FDM (repaired).stl 108.4 x 169.9 x 174.8 mm | 4.27 x 6.69 x 6.88 in | Size: 108.4 x 169.9 x 174.8 mm | 4.27 x 6.69 x 6.88 in | File size: 7.28 mb | Printing Time / Filament: 17 h 41 min / 120 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_35_smallSection_h_FDM (repaired).stl 82 x 162.5 x 238.1 mm | 3.23 x 6.4 x 9.37 in | Size: 82 x 162.5 x 238.1 mm | 3.23 x 6.4 x 9.37 in | File size: 8.49 mb | Printing Time / Filament: 14 h 58 min / 94 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_36_smallSection_i_FDM (repaired).stl 81.9 x 157.3 x 238.1 mm | 3.22 x 6.19 x 9.37 in | Size: 81.9 x 157.3 x 238.1 mm | 3.22 x 6.19 x 9.37 in | File size: 8.38 mb | Printing Time / Filament: 14 h 38 min / 92 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_37_pin_V1_X162_FDM (repaired).stl 8 x 16 x 4 mm | 0.31 x 0.63 x 0.16 in | Size: 8 x 16 x 4 mm | 0.31 x 0.63 x 0.16 in | File size: 0.01 mb | Printing Time / Filament: 4 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_38_batteryCase_a_FDM (repaired).stl 149.4 x 58.5 x 134.1 mm | 5.88 x 2.3 x 5.28 in | Size: 149.4 x 58.5 x 134.1 mm | 5.88 x 2.3 x 5.28 in | File size: 1.58 mb | Printing Time / Filament: 4 h 25 min / 33 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_39_engine_a_X3_FDM (repaired).stl 53.8 x 172.6 x 13 mm | 2.12 x 6.8 x 0.51 in | Size: 53.8 x 172.6 x 13 mm | 2.12 x 6.8 x 0.51 in | File size: 11.08 mb | Printing Time / Filament: 1 h 39 min / 12 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_40_engine_b_X3_FDM (repaired).stl 156.4 x 53.6 x 12.9 mm | 6.16 x 2.11 x 0.51 in | Size: 156.4 x 53.6 x 12.9 mm | 6.16 x 2.11 x 0.51 in | File size: 2.81 mb | Printing Time / Filament: 1 h 36 min / 11 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_41_engine_c_X3_FDM (repaired).stl 160.2 x 51.8 x 12.9 mm | 6.31 x 2.04 x 0.51 in | Size: 160.2 x 51.8 x 12.9 mm | 6.31 x 2.04 x 0.51 in | File size: 10.20 mb | Printing Time / Filament: 1 h 28 min / 11 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_42_engine_d_X3_FDM (repaired).stl 153.9 x 52.1 x 12.9 mm | 6.06 x 2.05 x 0.51 in | Size: 153.9 x 52.1 x 12.9 mm | 6.06 x 2.05 x 0.51 in | File size: 2.83 mb | Printing Time / Filament: 1 h 35 min / 11 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_43_engine_e_X3_FDM (repaired).stl 49.8 x 156.4 x 1.2 mm | 1.96 x 6.16 x 0.05 in | Size: 49.8 x 156.4 x 1.2 mm | 1.96 x 6.16 x 0.05 in | File size: 0.01 mb | Printing Time / Filament: 16 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_44_engine_f_X3_FDM (repaired).stl 155.7 x 49.8 x 1.2 mm | 6.13 x 1.96 x 0.05 in | Size: 155.7 x 49.8 x 1.2 mm | 6.13 x 1.96 x 0.05 in | File size: 0.01 mb | Printing Time / Filament: 17 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_45_engine_g_X3_FDM (repaired).stl 51.6 x 162.9 x 1.2 mm | 2.03 x 6.41 x 0.05 in | Size: 51.6 x 162.9 x 1.2 mm | 2.03 x 6.41 x 0.05 in | File size: 0.01 mb | Printing Time / Filament: 17 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_46_engine_h_X3_FDM (repaired).stl 164 x 51.6 x 1.2 mm | 6.46 x 2.03 x 0.05 in | Size: 164 x 51.6 x 1.2 mm | 6.46 x 2.03 x 0.05 in | File size: 0.01 mb | Printing Time / Filament: 18 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_47_buildingCentralSection_a_X3_FDM (repaired).stl 37.3 x 35.6 x 68.4 mm | 1.47 x 1.4 x 2.69 in | Size: 37.3 x 35.6 x 68.4 mm | 1.47 x 1.4 x 2.69 in | File size: 10.70 mb | Printing Time / Filament: 1 h 7 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_48_buildingCentralSection_b_X3_FDM (repaired).stl 19.3 x 19.3 x 78.6 mm | 0.76 x 0.76 x 3.09 in | Size: 19.3 x 19.3 x 78.6 mm | 0.76 x 0.76 x 3.09 in | File size: 1.35 mb | Printing Time / Filament: 1 h 8 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_49_buildingCentralSection_c_X3_FDM (repaired).stl 22.6 x 19.5 x 101.2 mm | 0.89 x 0.77 x 3.98 in | Size: 22.6 x 19.5 x 101.2 mm | 0.89 x 0.77 x 3.98 in | File size: 3.45 mb | Printing Time / Filament: 1 h 42 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_50_buildingCentralSection_d_X3_FDM (repaired).stl 15.6 x 23.7 x 84.1 mm | 0.61 x 0.93 x 3.31 in | Size: 15.6 x 23.7 x 84.1 mm | 0.61 x 0.93 x 3.31 in | File size: 3.32 mb | Printing Time / Filament: 1 h 22 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_51_buildingCentralSection_e_X3_FDM (repaired).stl 18.1 x 25.7 x 66.8 mm | 0.71 x 1.01 x 2.63 in | Size: 18.1 x 25.7 x 66.8 mm | 0.71 x 1.01 x 2.63 in | File size: 7.44 mb | Printing Time / Filament: 51 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_52_buildingCentralSection_f_X3_FDM (repaired).stl 15.6 x 17.7 x 122.9 mm | 0.61 x 0.7 x 4.84 in | Size: 15.6 x 17.7 x 122.9 mm | 0.61 x 0.7 x 4.84 in | File size: 0.49 mb | Printing Time / Filament: 1 h 19 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_53_buildingCentralSection_g_X3_FDM (repaired).stl 25.1 x 29 x 93.8 mm | 0.99 x 1.14 x 3.69 in | Size: 25.1 x 29 x 93.8 mm | 0.99 x 1.14 x 3.69 in | File size: 2.59 mb | Printing Time / Filament: 1 h 50 min / 8 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_54_buildingCentralSection_h_X6_FDM (repaired).stl 32 x 55.2 x 141.8 mm | 1.26 x 2.17 x 5.58 in | Size: 32 x 55.2 x 141.8 mm | 1.26 x 2.17 x 5.58 in | File size: 8.51 mb | Printing Time / Filament: 2 h 58 min / 15 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_55_buildingCentralSection_i_X4_FDM (repaired).stl 28.1 x 19 x 72.7 mm | 1.11 x 0.75 x 2.86 in | Size: 28.1 x 19 x 72.7 mm | 1.11 x 0.75 x 2.86 in | File size: 16.03 mb | Printing Time / Filament: 1 h 10 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_56_buildingCentralSection_j_X2_FDM (repaired).stl 21.9 x 16.8 x 141.3 mm | 0.86 x 0.66 x 5.56 in | Size: 21.9 x 16.8 x 141.3 mm | 0.86 x 0.66 x 5.56 in | File size: 0.65 mb | Printing Time / Filament: 1 h 36 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_57_buildingCentralSection_k_X3_FDM (repaired).stl 27.6 x 21 x 171.9 mm | 1.09 x 0.83 x 6.77 in | Size: 27.6 x 21 x 171.9 mm | 1.09 x 0.83 x 6.77 in | File size: 1.94 mb | Printing Time / Filament: 2 h 34 min / 8 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_58_mainTower_a_FDM (repaired).stl 37.3 x 36 x 137.7 mm | 1.47 x 1.42 x 5.42 in | Size: 37.3 x 36 x 137.7 mm | 1.47 x 1.42 x 5.42 in | File size: 4.40 mb | Printing Time / Filament: 3 h 25 min / 14 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_59_mainTower_b_FDM (repaired).stl 35 x 37.1 x 115 mm | 1.38 x 1.46 x 4.53 in | Size: 35 x 37.1 x 115 mm | 1.38 x 1.46 x 4.53 in | File size: 1.46 mb | Printing Time / Filament: 2 h 50 min / 14 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_60_mainTower_c_FDM (repaired).stl 35 x 37.1 x 124.1 mm | 1.38 x 1.46 x 4.89 in | Size: 35 x 37.1 x 124.1 mm | 1.38 x 1.46 x 4.89 in | File size: 0.61 mb | Printing Time / Filament: 2 h 15 min / 10 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_61_mainTower_d_X4_FDM (repaired).stl 9.1 x 12 x 4 mm | 0.36 x 0.47 x 0.16 in | Size: 9.1 x 12 x 4 mm | 0.36 x 0.47 x 0.16 in | File size: 0.01 mb | Printing Time / Filament: 3 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_62_mainTower_e_X2_FDM (repaired).stl 54.2 x 32.9 x 2.8 mm | 2.13 x 1.3 x 0.11 in | Size: 54.2 x 32.9 x 2.8 mm | 2.13 x 1.3 x 0.11 in | File size: 0.33 mb | Printing Time / Filament: 2 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_63_mainTower_f_FDM (repaired).stl 3.8 x 41 x 2.8 mm | 0.15 x 1.61 x 0.11 in | Size: 3.8 x 41 x 2.8 mm | 0.15 x 1.61 x 0.11 in | File size: 0.33 mb | Printing Time / Filament: 2 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_64_mainTower_g_X2_FDM (repaired).stl 125.2 x 6.7 x 23.5 mm | 4.93 x 0.26 x 0.93 in | Size: 125.2 x 6.7 x 23.5 mm | 4.93 x 0.26 x 0.93 in | File size: 0.30 mb | Printing Time / Filament: 21 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_65_mainTower_h_X2_FDM (repaired).stl 6.1 x 6.6 x 61.6 mm | 0.24 x 0.26 x 2.43 in | Size: 6.1 x 6.6 x 61.6 mm | 0.24 x 0.26 x 2.43 in | File size: 0.04 mb | Printing Time / Filament: 7 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_66_mainTower_i_X3_FDM (repaired).stl 158.3 x 97.1 x 33.3 mm | 6.23 x 3.82 x 1.31 in | Size: 158.3 x 97.1 x 33.3 mm | 6.23 x 3.82 x 1.31 in | File size: 0.25 mb | Printing Time / Filament: 42 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_67_mainTower_j_X2_FDM (repaired).stl 85.3 x 8.7 x 49.3 mm | 3.36 x 0.34 x 1.94 in | Size: 85.3 x 8.7 x 49.3 mm | 3.36 x 0.34 x 1.94 in | File size: 0.19 mb | Printing Time / Filament: 38 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_68_mainTower_k_X3_FDM (repaired).stl 8.7 x 81.7 x 44.9 mm | 0.34 x 3.22 x 1.77 in | Size: 8.7 x 81.7 x 44.9 mm | 0.34 x 3.22 x 1.77 in | File size: 0.20 mb | Printing Time / Filament: 32 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_69_mainTower_l_X3_FDM (repaired).stl 47.2 x 37.8 x 3.8 mm | 1.86 x 1.49 x 0.15 in | Size: 47.2 x 37.8 x 3.8 mm | 1.86 x 1.49 x 0.15 in | File size: 0.13 mb | Printing Time / Filament: 6 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_70_mainTower_m_FDM (repaired).stl 34 x 55.2 x 6.7 mm | 1.34 x 2.17 x 0.26 in | Size: 34 x 55.2 x 6.7 mm | 1.34 x 2.17 x 0.26 in | File size: 0.03 mb | Printing Time / Filament: 7 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_71_mainTower_n_FDM (repaired).stl 28.5 x 28.5 x 6.7 mm | 1.12 x 1.12 x 0.26 in | Size: 28.5 x 28.5 x 6.7 mm | 1.12 x 1.12 x 0.26 in | File size: 0.03 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_72_pin_V2_X3_FDM (repaired).stl 14.6 x 18.9 x 10 mm | 0.57 x 0.74 x 0.39 in | Size: 14.6 x 18.9 x 10 mm | 0.57 x 0.74 x 0.39 in | File size: 0.03 mb | Printing Time / Filament: 9 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_73_groupBuildings_a_FDM (repaired).stl 126.1 x 188.8 x 76.9 mm | 4.96 x 7.43 x 3.03 in | Size: 126.1 x 188.8 x 76.9 mm | 4.96 x 7.43 x 3.03 in | File size: 3.72 mb | Printing Time / Filament: 2 h 51 min / 22 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_74_groupBuildings_b_FDM (repaired).stl 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | Size: 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | File size: 14.88 mb | Printing Time / Filament: 3 h 33 min / 25 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_75_groupBuildings_c_FDM (repaired).stl 188.8 x 126.1 x 76.9 mm | 7.43 x 4.96 x 3.03 in | Size: 188.8 x 126.1 x 76.9 mm | 7.43 x 4.96 x 3.03 in | File size: 4.07 mb | Printing Time / Filament: 3 h 25 min / 26 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_76_groupBuildings_d_FDM (repaired).stl 188.8 x 126.1 x 79 mm | 7.43 x 4.96 x 3.11 in | Size: 188.8 x 126.1 x 79 mm | 7.43 x 4.96 x 3.11 in | File size: 4.69 mb | Printing Time / Filament: 3 h 16 min / 24 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_77_groupBuildings_e_FDM (repaired).stl 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | Size: 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | File size: 3.31 mb | Printing Time / Filament: 2 h 46 min / 22 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_78_groupBuildings_f_FDM (repaired).stl 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | Size: 126.1 x 188.8 x 79 mm | 4.96 x 7.43 x 3.11 in | File size: 8.10 mb | Printing Time / Filament: 3 h 35 min / 25 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_79_groupBuildings_g_FDM (repaired).stl 112.8 x 130.5 x 79.6 mm | 4.44 x 5.14 x 3.13 in | Size: 112.8 x 130.5 x 79.6 mm | 4.44 x 5.14 x 3.13 in | File size: 12.60 mb | Printing Time / Filament: 2 h 35 min / 15 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_80_groupBuildings_h_FDM (repaired).stl 133.2 x 129 x 79.6 mm | 5.24 x 5.08 x 3.13 in | Size: 133.2 x 129 x 79.6 mm | 5.24 x 5.08 x 3.13 in | File size: 11.04 mb | Printing Time / Filament: 2 h 30 min / 14 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_81_groupBuildings_i_FDM (repaired).stl 135.5 x 100.5 x 79.6 mm | 5.33 x 3.96 x 3.13 in | Size: 135.5 x 100.5 x 79.6 mm | 5.33 x 3.96 x 3.13 in | File size: 12.28 mb | Printing Time / Filament: 2 h 36 min / 15 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_82_groupBuildings_j_X3_FDM (repaired).stl 89.4 x 62.5 x 8 mm | 3.52 x 2.46 x 0.31 in | Size: 89.4 x 62.5 x 8 mm | 3.52 x 2.46 x 0.31 in | File size: 0.27 mb | Printing Time / Filament: 40 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_83_groupBuildings_k_FDM (repaired).stl 77.2 x 79.7 x 8 mm | 3.04 x 3.14 x 0.31 in | Size: 77.2 x 79.7 x 8 mm | 3.04 x 3.14 x 0.31 in | File size: 0.27 mb | Printing Time / Filament: 41 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_84_groupBuildings_l_FDM (repaired).stl 111.1 x 123.9 x 8.2 mm | 4.37 x 4.88 x 0.32 in | Size: 111.1 x 123.9 x 8.2 mm | 4.37 x 4.88 x 0.32 in | File size: 0.49 mb | Printing Time / Filament: 1 h 13 min / 9 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_85_groupBuildings_m_X3_FDM (repaired).stl 42.5 x 34.4 x 4.7 mm | 1.67 x 1.35 x 0.19 in | Size: 42.5 x 34.4 x 4.7 mm | 1.67 x 1.35 x 0.19 in | File size: 0.15 mb | Printing Time / Filament: 9 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_86_groupBuildings_n_X3_FDM (repaired).stl 42.5 x 34.4 x 4.7 mm | 1.67 x 1.35 x 0.19 in | Size: 42.5 x 34.4 x 4.7 mm | 1.67 x 1.35 x 0.19 in | File size: 0.15 mb | Printing Time / Filament: 9 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_87_groupBuildings_o_FDM (repaired).stl 56.5 x 40.8 x 3.3 mm | 2.22 x 1.61 x 0.13 in | Size: 56.5 x 40.8 x 3.3 mm | 2.22 x 1.61 x 0.13 in | File size: 0.20 mb | Printing Time / Filament: 8 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_88_groupBuildings_p_FDM (repaired).stl 19.4 x 62.4 x 3.3 mm | 0.76 x 2.46 x 0.13 in | Size: 19.4 x 62.4 x 3.3 mm | 0.76 x 2.46 x 0.13 in | File size: 0.19 mb | Printing Time / Filament: 9 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_89_V1_ammunitionCompartment_a_X3_FDM (repaired).stl 66.4 x 82.8 x 13.8 mm | 2.61 x 3.26 x 0.54 in | Size: 66.4 x 82.8 x 13.8 mm | 2.61 x 3.26 x 0.54 in | File size: 1.42 mb | Printing Time / Filament: 36 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_89_V2_ammunitionCompartment_a_X3_FDM (repaired).stl 77.8 x 63.2 x 13.8 mm | 3.06 x 2.49 x 0.54 in | Size: 77.8 x 63.2 x 13.8 mm | 3.06 x 2.49 x 0.54 in | File size: 1.56 mb | Printing Time / Filament: 42 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_90_V2_ammunitionCompartment_b_X3_FDM (repaired).stl 30.1 x 37.4 x 1 mm | 1.19 x 1.47 x 0.04 in | Size: 30.1 x 37.4 x 1 mm | 1.19 x 1.47 x 0.04 in | File size: 0.25 mb | Printing Time / Filament: 2 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_91_centralBuildingLargeSection_a_X3_FDM (repaired).stl 25.5 x 26.2 x 108.7 mm | 1 x 1.03 x 4.28 in | Size: 25.5 x 26.2 x 108.7 mm | 1 x 1.03 x 4.28 in | File size: 1.75 mb | Printing Time / Filament: 1 h 54 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_92_centralBuildingLargeSection_b_X9_FDM (repaired).stl 62.9 x 36.4 x 31.6 mm | 2.48 x 1.43 x 1.24 in | Size: 62.9 x 36.4 x 31.6 mm | 2.48 x 1.43 x 1.24 in | File size: 0.09 mb | Printing Time / Filament: 15 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_93_centralBuildingLargeSection_c_X3_FDM (repaired).stl 51.4 x 79.2 x 4.2 mm | 2.02 x 3.12 x 0.17 in | Size: 51.4 x 79.2 x 4.2 mm | 2.02 x 3.12 x 0.17 in | File size: 0.07 mb | Printing Time / Filament: 7 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_94_buildingLargeSection_a_X15_FDM (repaired).stl 17 x 20.8 x 39.3 mm | 0.67 x 0.82 x 1.55 in | Size: 17 x 20.8 x 39.3 mm | 0.67 x 0.82 x 1.55 in | File size: 1.95 mb | Printing Time / Filament: 33 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_95_buildingLargeSection_b_X2_FDM (repaired).stl 27.2 x 22.2 x 51.4 mm | 1.07 x 0.87 x 2.02 in | Size: 27.2 x 22.2 x 51.4 mm | 1.07 x 0.87 x 2.02 in | File size: 1.96 mb | Printing Time / Filament: 48 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_96_buildingLargeSection_c_X2_FDM (repaired).stl 15.2 x 17.4 x 69.7 mm | 0.6 x 0.69 x 2.74 in | Size: 15.2 x 17.4 x 69.7 mm | 0.6 x 0.69 x 2.74 in | File size: 1.17 mb | Printing Time / Filament: 47 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_97_buildingLargeSection_d_X2_FDM (repaired).stl 22.3 x 16.8 x 55.5 mm | 0.88 x 0.66 x 2.19 in | Size: 22.3 x 16.8 x 55.5 mm | 0.88 x 0.66 x 2.19 in | File size: 1.39 mb | Printing Time / Filament: 44 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_98_buildingLargeSection_e_X4_FDM (repaired).stl 14.8 x 12 x 32.7 mm | 0.58 x 0.47 x 1.29 in | Size: 14.8 x 12 x 32.7 mm | 0.58 x 0.47 x 1.29 in | File size: 0.16 mb | Printing Time / Filament: 16 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_99_buildingLargeSection_f_FDM (repaired).stl 20.2 x 20.2 x 34.9 mm | 0.8 x 0.8 x 1.37 in | Size: 20.2 x 20.2 x 34.9 mm | 0.8 x 0.8 x 1.37 in | File size: 7.14 mb | Printing Time / Filament: 26 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_100_buildingLargeSection_g_FDM (repaired).stl 11.5 x 15.3 x 38.2 mm | 0.45 x 0.6 x 1.5 in | Size: 11.5 x 15.3 x 38.2 mm | 0.45 x 0.6 x 1.5 in | File size: 1.18 mb | Printing Time / Filament: 22 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_101_buildingLargeSection_h_FDM (repaired).stl 19.2 x 15.6 x 73.4 mm | 0.76 x 0.61 x 2.89 in | Size: 19.2 x 15.6 x 73.4 mm | 0.76 x 0.61 x 2.89 in | File size: 0.86 mb | Printing Time / Filament: 39 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_102_buildingLargeSection_i_X2_FDM (repaired).stl 12.7 x 15.2 x 25.3 mm | 0.5 x 0.6 x 1 in | Size: 12.7 x 15.2 x 25.3 mm | 0.5 x 0.6 x 1 in | File size: 9.15 mb | Printing Time / Filament: 19 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_103_buildingLargeSection_j_FDM (repaired).stl 21.7 x 12 x 44.4 mm | 0.85 x 0.47 x 1.75 in | Size: 21.7 x 12 x 44.4 mm | 0.85 x 0.47 x 1.75 in | File size: 4.11 mb | Printing Time / Filament: 32 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_104_buildingLargeSection_k_FDM (repaired).stl 17.5 x 16.3 x 51.8 mm | 0.69 x 0.64 x 2.04 in | Size: 17.5 x 16.3 x 51.8 mm | 0.69 x 0.64 x 2.04 in | File size: 0.33 mb | Printing Time / Filament: 38 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_105_buildingLargeSection_l_FDM (repaired).stl 9.5 x 9.8 x 58.2 mm | 0.37 x 0.39 x 2.29 in | Size: 9.5 x 9.8 x 58.2 mm | 0.37 x 0.39 x 2.29 in | File size: 0.27 mb | Printing Time / Filament: 20 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_106_buildingLargeSection_m_FDM (repaired).stl 10.5 x 11.8 x 56.1 mm | 0.41 x 0.46 x 2.21 in | Size: 10.5 x 11.8 x 56.1 mm | 0.41 x 0.46 x 2.21 in | File size: 6.85 mb | Printing Time / Filament: 29 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_107_buildingLargeSection_n_FDM (repaired).stl 12.4 x 11.5 x 50.5 mm | 0.49 x 0.45 x 1.99 in | Size: 12.4 x 11.5 x 50.5 mm | 0.49 x 0.45 x 1.99 in | File size: 0.68 mb | Printing Time / Filament: 32 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_108_buildingLargeSection_0_X3_FDM (repaired).stl 16.1 x 12.1 x 37.4 mm | 0.63 x 0.48 x 1.47 in | Size: 16.1 x 12.1 x 37.4 mm | 0.63 x 0.48 x 1.47 in | File size: 1.06 mb | Printing Time / Filament: 21 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_109_buildingLargeSection_p_FDM (repaired).stl 10 x 9.7 x 44.1 mm | 0.39 x 0.38 x 1.74 in | Size: 10 x 9.7 x 44.1 mm | 0.39 x 0.38 x 1.74 in | File size: 0.21 mb | Printing Time / Filament: 18 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_110_buildingLargeSection_q_FDM (repaired).stl 17.3 x 17.7 x 34.6 mm | 0.68 x 0.7 x 1.36 in | Size: 17.3 x 17.7 x 34.6 mm | 0.68 x 0.7 x 1.36 in | File size: 0.15 mb | Printing Time / Filament: 27 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_111_buildingSmallSection_a_X3_FDM (repaired).stl 11.1 x 10.9 x 21.7 mm | 0.44 x 0.43 x 0.85 in | Size: 11.1 x 10.9 x 21.7 mm | 0.44 x 0.43 x 0.85 in | File size: 0.16 mb | Printing Time / Filament: 11 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_112_buildingSmallSection_b_X2_FDM (repaired).stl 8.1 x 7 x 28.4 mm | 0.32 x 0.28 x 1.12 in | Size: 8.1 x 7 x 28.4 mm | 0.32 x 0.28 x 1.12 in | File size: 0.12 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_113_buildingSmallSection_c_X4_FDM (repaired).stl 9.3 x 8.5 x 14.5 mm | 0.37 x 0.33 x 0.57 in | Size: 9.3 x 8.5 x 14.5 mm | 0.37 x 0.33 x 0.57 in | File size: 0.30 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_114_buildingSmallSection_d_X3_FDM (repaired).stl 15.4 x 12.5 x 37.5 mm | 0.61 x 0.49 x 1.48 in | Size: 15.4 x 12.5 x 37.5 mm | 0.61 x 0.49 x 1.48 in | File size: 0.86 mb | Printing Time / Filament: 16 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_115_buildingSmallSection_e_X5_FDM (repaired).stl 15.3 x 12.7 x 31.1 mm | 0.6 x 0.5 x 1.22 in | Size: 15.3 x 12.7 x 31.1 mm | 0.6 x 0.5 x 1.22 in | File size: 0.32 mb | Printing Time / Filament: 19 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_116_buildingSmallSection_f_FDM (repaired).stl 14 x 17.5 x 33.3 mm | 0.55 x 0.69 x 1.31 in | Size: 14 x 17.5 x 33.3 mm | 0.55 x 0.69 x 1.31 in | File size: 1.37 mb | Printing Time / Filament: 21 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_117_buildingSmallSection_g_FDM (repaired).stl 14 x 14.4 x 37 mm | 0.55 x 0.57 x 1.46 in | Size: 14 x 14.4 x 37 mm | 0.55 x 0.57 x 1.46 in | File size: 0.29 mb | Printing Time / Filament: 22 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_118_buildingSmallSection_h_X2_FDM (repaired).stl 12.5 x 9.5 x 36.1 mm | 0.49 x 0.37 x 1.42 in | Size: 12.5 x 9.5 x 36.1 mm | 0.49 x 0.37 x 1.42 in | File size: 0.16 mb | Printing Time / Filament: 14 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_119_buildingSmallSection_i_FDM (repaired).stl 8.1 x 10.3 x 37.1 mm | 0.32 x 0.41 x 1.46 in | Size: 8.1 x 10.3 x 37.1 mm | 0.32 x 0.41 x 1.46 in | File size: 1.54 mb | Printing Time / Filament: 12 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_120_buildingSmallSection_j_X2_FDM (repaired).stl 12.7 x 10.9 x 33.1 mm | 0.5 x 0.43 x 1.3 in | Size: 12.7 x 10.9 x 33.1 mm | 0.5 x 0.43 x 1.3 in | File size: 0.16 mb | Printing Time / Filament: 16 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_121_buildingSmallSection_k_X3_FDM (repaired).stl 5.8 x 5.9 x 25.7 mm | 0.23 x 0.23 x 1.01 in | Size: 5.8 x 5.9 x 25.7 mm | 0.23 x 0.23 x 1.01 in | File size: 0.24 mb | Printing Time / Filament: 5 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_122_buildingSmallSection_l_FDM (repaired).stl 8.2 x 16.4 x 22.9 mm | 0.32 x 0.65 x 0.9 in | Size: 8.2 x 16.4 x 22.9 mm | 0.32 x 0.65 x 0.9 in | File size: 0.38 mb | Printing Time / Filament: 17 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_123_buildingSmallSection_m_FDM (repaired).stl 7.3 x 13.6 x 25.2 mm | 0.29 x 0.54 x 0.99 in | Size: 7.3 x 13.6 x 25.2 mm | 0.29 x 0.54 x 0.99 in | File size: 1.37 mb | Printing Time / Filament: 11 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_124_buildingSmallSection_n_FDM (repaired).stl 11.3 x 11.5 x 9.5 mm | 0.44 x 0.45 x 0.37 in | Size: 11.3 x 11.5 x 9.5 mm | 0.44 x 0.45 x 0.37 in | File size: 0.19 mb | Printing Time / Filament: 8 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_125_buildingSmallSection_o_X15_FDM (repaired).stl 12.9 x 11 x 8.8 mm | 0.51 x 0.43 x 0.35 in | Size: 12.9 x 11 x 8.8 mm | 0.51 x 0.43 x 0.35 in | File size: 0.17 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_126_buildingSmallSection_p_X3_FDM (repaired).stl 6.5 x 13.1 x 8.6 mm | 0.26 x 0.52 x 0.34 in | Size: 6.5 x 13.1 x 8.6 mm | 0.26 x 0.52 x 0.34 in | File size: 0.19 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_127_buildingSmallSection_q_X3_FDM (repaired).stl 10.5 x 11.8 x 8.8 mm | 0.41 x 0.46 x 0.35 in | Size: 10.5 x 11.8 x 8.8 mm | 0.41 x 0.46 x 0.35 in | File size: 0.16 mb | Printing Time / Filament: 6 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_128_buildingSmallSection_r_X3_FDM (repaired).stl 6.9 x 16.2 x 10 mm | 0.27 x 0.64 x 0.39 in | Size: 6.9 x 16.2 x 10 mm | 0.27 x 0.64 x 0.39 in | File size: 0.24 mb | Printing Time / Filament: 8 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_129_buildingSmallSection_s_X3_FDM (repaired).stl 13.1 x 19.9 x 7.3 mm | 0.52 x 0.78 x 0.29 in | Size: 13.1 x 19.9 x 7.3 mm | 0.52 x 0.78 x 0.29 in | File size: 0.09 mb | Printing Time / Filament: 8 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_130_port_a_FDM (repaired).stl 21.6 x 110.5 x 110 mm | 0.85 x 4.35 x 4.33 in | Size: 21.6 x 110.5 x 110 mm | 0.85 x 4.35 x 4.33 in | File size: 2.73 mb | Printing Time / Filament: 2 h 44 min / 15 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_131_port_b_FDM (repaired).stl 97.8 x 135.2 x 15 mm | 3.85 x 5.32 x 0.59 in | Size: 97.8 x 135.2 x 15 mm | 3.85 x 5.32 x 0.59 in | File size: 1.68 mb | Printing Time / Filament: 50 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_132_port_c_X7_FDM (repaired).stl 16.1 x 16.4 x 5 mm | 0.63 x 0.65 x 0.2 in | Size: 16.1 x 16.4 x 5 mm | 0.63 x 0.65 x 0.2 in | File size: 0.01 mb | Printing Time / Filament: 5 min / <1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_133_bodyPart_a_FDM (repaired).stl 83.5 x 79.9 x 69.8 mm | 3.29 x 3.15 x 2.75 in | Size: 83.5 x 79.9 x 69.8 mm | 3.29 x 3.15 x 2.75 in | File size: 3.06 mb | Printing Time / Filament: 2 h 9 min / 13 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_134_bodyPart_b_X3_FDM (repaired).stl 71.6 x 56.9 x 10.3 mm | 2.82 x 2.24 x 0.41 in | Size: 71.6 x 56.9 x 10.3 mm | 2.82 x 2.24 x 0.41 in | File size: 0.35 mb | Printing Time / Filament: 16 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_135_bodyPart_c_FDM (repaired).stl 74.7 x 54.2 x 66.6 mm | 2.94 x 2.13 x 2.62 in | Size: 74.7 x 54.2 x 66.6 mm | 2.94 x 2.13 x 2.62 in | File size: 0.85 mb | Printing Time / Filament: 2 h 6 min / 14 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_136_bodyPart_d_FDM (repaired).stl 90.4 x 32.7 x 15.6 mm | 3.56 x 1.29 x 0.61 in | Size: 90.4 x 32.7 x 15.6 mm | 3.56 x 1.29 x 0.61 in | File size: 0.43 mb | Printing Time / Filament: 27 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_137_bodyPart_e_FDM (repaired).stl 89.5 x 31.5 x 15.6 mm | 3.52 x 1.24 x 0.61 in | Size: 89.5 x 31.5 x 15.6 mm | 3.52 x 1.24 x 0.61 in | File size: 0.44 mb | Printing Time / Filament: 28 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_138_bodyPart_f_FDM (repaired).stl 89.5 x 31.5 x 15.6 mm | 3.52 x 1.24 x 0.61 in | Size: 89.5 x 31.5 x 15.6 mm | 3.52 x 1.24 x 0.61 in | File size: 0.44 mb | Printing Time / Filament: 27 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_139_bodyPart_g_FDM (repaired).stl 90.4 x 32.7 x 15.6 mm | 3.56 x 1.29 x 0.61 in | Size: 90.4 x 32.7 x 15.6 mm | 3.56 x 1.29 x 0.61 in | File size: 0.43 mb | Printing Time / Filament: 27 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_140_bodyPart_h_X3_FDM (repaired).stl 80.1 x 40.2 x 10.3 mm | 3.15 x 1.58 x 0.41 in | Size: 80.1 x 40.2 x 10.3 mm | 3.15 x 1.58 x 0.41 in | File size: 0.36 mb | Printing Time / Filament: 16 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_141_bodyPart_i_X3_FDM (repaired).stl 13.9 x 41.2 x 28.4 mm | 0.55 x 1.62 x 1.12 in | Size: 13.9 x 41.2 x 28.4 mm | 0.55 x 1.62 x 1.12 in | File size: 1.32 mb | Printing Time / Filament: 28 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_142_bodyPart_j_X3_FDM (repaired).stl 54.7 x 39.9 x 22.8 mm | 2.15 x 1.57 x 0.9 in | Size: 54.7 x 39.9 x 22.8 mm | 2.15 x 1.57 x 0.9 in | File size: 0.57 mb | Printing Time / Filament: 31 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_143_bodyPart_k_X3_FDM (repaired).stl 27.1 x 55.1 x 22.8 mm | 1.07 x 2.17 x 0.9 in | Size: 27.1 x 55.1 x 22.8 mm | 1.07 x 2.17 x 0.9 in | File size: 0.55 mb | Printing Time / Filament: 32 min / 3 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_144_bodyPart_l_X6_FDM (repaired).stl 32.8 x 34.7 x 20.5 mm | 1.29 x 1.37 x 0.81 in | Size: 32.8 x 34.7 x 20.5 mm | 1.29 x 1.37 x 0.81 in | File size: 0.96 mb | Printing Time / Filament: 26 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_145_bodyPart_m_X6_FDM (repaired).stl 28.4 x 55.9 x 20.5 mm | 1.12 x 2.2 x 0.81 in | Size: 28.4 x 55.9 x 20.5 mm | 1.12 x 2.2 x 0.81 in | File size: 1.92 mb | Printing Time / Filament: 43 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_146_bodyPart_n_X3_FDM (repaired).stl 108.1 x 35.9 x 22 mm | 4.26 x 1.41 x 0.87 in | Size: 108.1 x 35.9 x 22 mm | 4.26 x 1.41 x 0.87 in | File size: 0.75 mb | Printing Time / Filament: 56 min / 6 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_147_bodyPart_o_X2_FDM (repaired).stl 20.2 x 25.5 x 108.1 mm | 0.8 x 1 x 4.26 in | Size: 20.2 x 25.5 x 108.1 mm | 0.8 x 1 x 4.26 in | File size: 1.11 mb | Printing Time / Filament: 1 h 35 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_148_bodyPart_p_FDM (repaired).stl 123.1 x 50.5 x 43.4 mm | 4.85 x 1.99 x 1.71 in | Size: 123.1 x 50.5 x 43.4 mm | 4.85 x 1.99 x 1.71 in | File size: 1.96 mb | Printing Time / Filament: 2 h 9 min / 16 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_149_bodyPart_q_FDM (repaired).stl 50.5 x 123.1 x 44.2 mm | 1.99 x 4.85 x 1.74 in | Size: 50.5 x 123.1 x 44.2 mm | 1.99 x 4.85 x 1.74 in | File size: 1.97 mb | Printing Time / Filament: 2 h 24 min / 17 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_150_bodyPart_r_FDM (repaired).stl 123.1 x 50.5 x 43.4 mm | 4.85 x 1.99 x 1.71 in | Size: 123.1 x 50.5 x 43.4 mm | 4.85 x 1.99 x 1.71 in | File size: 2.17 mb | Printing Time / Filament: 2 h 8 min / 16 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_151_bodyPart_s_X3_FDM (repaired).stl 21.7 x 87.2 x 25.8 mm | 0.85 x 3.43 x 1.02 in | Size: 21.7 x 87.2 x 25.8 mm | 0.85 x 3.43 x 1.02 in | File size: 1.88 mb | Printing Time / Filament: 51 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_152_bodyPart_t_X3_FDM (repaired).stl 21.7 x 87.2 x 17.9 mm | 0.85 x 3.43 x 0.7 in | Size: 21.7 x 87.2 x 17.9 mm | 0.85 x 3.43 x 0.7 in | File size: 1.75 mb | Printing Time / Filament: 42 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_153_bridge_a_FDM (repaired).stl 110.2 x 28.2 x 6.2 mm | 4.34 x 1.11 x 0.24 in | Size: 110.2 x 28.2 x 6.2 mm | 4.34 x 1.11 x 0.24 in | File size: 0.62 mb | Printing Time / Filament: 16 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_154_internalDetailing_a_FDM (repaired).stl 184.7 x 34.6 x 86.8 mm | 7.27 x 1.36 x 3.42 in | Size: 184.7 x 34.6 x 86.8 mm | 7.27 x 1.36 x 3.42 in | File size: 0.81 mb | Printing Time / Filament: 4 h 36 min / 36 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_155_internalDetailing_b_X3_FDM (repaired).stl 28.2 x 131.1 x 36.9 mm | 1.11 x 5.16 x 1.45 in | Size: 28.2 x 131.1 x 36.9 mm | 1.11 x 5.16 x 1.45 in | File size: 1.59 mb | Printing Time / Filament: 1 h 15 min / 7 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_156_internalDetailing_c_X3_FDM (repaired).stl 28.2 x 131 x 61.2 mm | 1.11 x 5.16 x 2.41 in | Size: 28.2 x 131 x 61.2 mm | 1.11 x 5.16 x 2.41 in | File size: 1.44 mb | Printing Time / Filament: 1 h 45 min / 9 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_157_internalDetailing_d_X2_FDM (repaired).stl 24.3 x 198.3 x 13.6 mm | 0.96 x 7.81 x 0.54 in | Size: 24.3 x 198.3 x 13.6 mm | 0.96 x 7.81 x 0.54 in | File size: 2.89 mb | Printing Time / Filament: 47 min / 7 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_158_internalDetailing_e_X2_FDM (repaired).stl 24.3 x 71.7 x 8.6 mm | 0.96 x 2.82 x 0.34 in | Size: 24.3 x 71.7 x 8.6 mm | 0.96 x 2.82 x 0.34 in | File size: 0.05 mb | Printing Time / Filament: 15 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_159_internalDetailing_f_FDM (repaired).stl 124.3 x 24.3 x 13.6 mm | 4.89 x 0.96 x 0.54 in | Size: 124.3 x 24.3 x 13.6 mm | 4.89 x 0.96 x 0.54 in | File size: 0.59 mb | Printing Time / Filament: 30 min / 5 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_160_stand_a_X3_FDM (repaired).stl 204.8 x 108.7 x 134.1 mm | 8.06 x 4.28 x 5.28 in | Size: 204.8 x 108.7 x 134.1 mm | 8.06 x 4.28 x 5.28 in | File size: 0.05 mb | Printing Time / Filament: 3 h 40 min / 42 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_161_stand_b_X3_FDM (repaired).stl 108.7 x 204.8 x 134.1 mm | 4.28 x 8.06 x 5.28 in | Size: 108.7 x 204.8 x 134.1 mm | 4.28 x 8.06 x 5.28 in | File size: 0.05 mb | Printing Time / Filament: 3 h 40 min / 42 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_162_stand_c_X3_FDM (repaired).stl 69.7 x 76.4 x 19.4 mm | 2.74 x 3.01 x 0.76 in | Size: 69.7 x 76.4 x 19.4 mm | 2.74 x 3.01 x 0.76 in | File size: 0.04 mb | Printing Time / Filament: 29 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_163_stand_d_X3_FDM (repaired).stl 69.7 x 76.4 x 19.4 mm | 2.74 x 3.01 x 0.76 in | Size: 69.7 x 76.4 x 19.4 mm | 2.74 x 3.01 x 0.76 in | File size: 0.04 mb | Printing Time / Filament: 29 min / 4 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_164_stand_e_X6_FDM (repaired).stl 36.3 x 43.6 x 10 mm | 1.43 x 1.72 x 0.39 in | Size: 36.3 x 43.6 x 10 mm | 1.43 x 1.72 x 0.39 in | File size: 0.01 mb | Printing Time / Filament: 11 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
_165_logo_a_FDM (repaired).stl 97.8 x 68.2 x 70.8 mm | 3.85 x 2.69 x 2.79 in | Size: 97.8 x 68.2 x 70.8 mm | 3.85 x 2.69 x 2.79 in | File size: 1.19 mb | Printing Time / Filament: 1 h 18 min / 7 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
Keychain (repaired).stl 29.7 x 29.7 x 2.4 mm | 1.17 x 1.17 x 0.09 in | Size: 29.7 x 29.7 x 2.4 mm | 1.17 x 1.17 x 0.09 in | File size: 0.37 mb | Printing Time / Filament: 6 min / 1 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
Tag (repaired).stl 150.1 x 18.2 x 4.6 mm | 5.91 x 0.72 x 0.18 in | Size: 150.1 x 18.2 x 4.6 mm | 5.91 x 0.72 x 0.18 in | File size: 1.78 mb | Printing Time / Filament: 18 min / 2 m Slicer: prusa v2.9.2 Printer: prusa_xl Non default settings Layer height: 0.2 Fill density: 20% Support material: 1 Support material buildplate only: 1 | |||
3D model history
Built millions of years ago and flown from Earth to the Pegasus galaxy, the Lost City of the Ancients is the central hub of Stargate Atlantis and a major milestone in Stargate universe. After lying submerged beneath the ocean of Lantea, this Atlantis city ship was awakened by Dr. Elizabeth Weir's expedition to serve as humanity's primary outpost against the Wraith. Equipped with stardrives, drone weapons, and shield-backed Ancient technology, it functions as both a sprawling metropolis and a massive space station 3D model, now ready to build as a detailed sci-fi 3D print for your workbench.
Designed for fans looking for an authentic TV series 3D print or movie STL, this Atlantis 3D model recreates the symmetrical, snowflake-shaped layout with six piers radiating from a dense cluster of spires around the central Control Tower. Its multi-tiered decks include raised walkways, perimeter stabilizer fins, and pier-end bay hatches that can be assembled open or closed. A hollow interior and perforated facades allow optional LED lighting through the inner channels and towers, while the hexagonal stand holds a repositionable Stargate Atlantis nameplate. You can display this Atlantis Stargate release solo as a standalone spaceship STL, or pair it with a Stargate 3D print, Puddle Jumper 3D print, and BC-304 Daedalus 3D model to expand your fleet.
3D printing model features
Model-specific features:
- Depicts the symmetrical, snowflake-shaped architecture of the city-ship Atlantis, featuring six radiating piers, recessed inner bays, and a central cluster of high-rise spires led by the main Control Tower.
- Outer decks include detailed secondary Lantean towers, raised walkways, surface paneling, and vertical stabilizer fins along the perimeter edges.
- Circular bay hatches at the pier ends can be assembled in either open or closed configurations.
- Hollow internal structure and perforated skyscraper facades accommodate optional LED lighting across both the inner channels and surrounding buildings.
- Mounted on a hexagonal display stand with an optional, detachable "Stargate Atlantis" nameplate that can be placed in any position.
Printing & assembly details:
- Provided as error-free STL files compatible with most 3D printers;
- Optimized part division minimizes support material and ensures smooth and precise surface detailing;
- The assembly parts in the FFF/FDM version come in the recommended print orientations for easy bed placement;
- The DLP/SLA PDF assembly guide and video assembly for both versions are currently being finalized and will be available as soon as possible;
- The model is available in recommended scales — 1:3400 for the FFF/FDM version and 1:6800 for the DLP/SLA versions.
What will you get after purchase?
- 2 versions of Atlantis StargateSTL files for FFF/FDM and DLP/SLA — files for all versions are available for download after the purchase;
- STL files of high-poly Atlantis Stargate model for 3D printing consist of 268 files;
- Sizes for:
- FFF/FDM Model Size: 1210 mm wide, 432 mm high, 1132 mm deep;
- FFF/FDM Platform Size: 436 mm wide, 149 mm high, 491 mm deep;
- DLP/SLA Model Size: 605 mm wide, 216 mm high, 566 mm deep;
- DLP/SLA Platform Size: 218 mm wide, 75 mm high, 245 mm deep;
- The DLP/SLA PDF assembly guide and video assembly for both versions are currently being finalized and will be available as soon as possible;
- Detailed settings that we provide as a recommendation for Bambu Studio, Cura, Orca Slicer, PrusaSlicer, Simplify3D, and Slic3r for the best print;
- Full technical support from the Gambody Support Team.
Below you'll find detailed slicing settings for Bambu Studio 2.0+, Orca Slicer 2.0+, UltiMaker Cura 5.0+, PrusaSlicer 2.0+, Slic3r 1.3+, Simplify3D 5.0+ to help you get the best results when printing this model. These settings are optimized specifically for this 3D model, but please note they may need slight adjustments depending on your printer or filament. When in doubt, refer to your printer's user manual.
To avoid printing issues and achieve the best quality, we highly recommend applying the following settings:
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
But you can paint the seam if you want.
You have to calibrate this parameter
You have to calibrate this parameter
You have to calibrate this parameter
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Disabled for vehicles and enabled for characters
For 0,2 Layer Height
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v2, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Enable this parameter if your model requires supports
We also recommend placing and removing supports manually in some places using special button
1-2 loops for more thick support
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
You have to calibrate this parameter which one is better for your filament
Increase this parameter if the supports are hard to remove from walls
For PLA and PETG filament types
5-8 mm is optional for small prints that have bad adhesion to the build plate
You have to calibrate this parameter
Read the description on your filament roll
Read the description on your filament roll and increase this parameter for fast printers
Read the description on your filament roll and increase this parameter for fast printers
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
But you can paint the seam if you want.
0.01-0.05 You have to calibrate this parameter
0.01-0.05 You have to calibrate this parameter
0.1-0.2 You have to calibrate this parameter
For pins and power elements of the structure, such as the vehicle frame, use 3 loop
Disabled for vehicles and ships, enabled for characters
For 0,2 Layer Height
For 0,2 Layer Height
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example, Anycubic Kobra 3 Or Bambulab A1, you can select the maximum recommended values.
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise
Enable this parameter if your model requires supports
We also recommend placing and removing supports manually in some places using special button
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Bottom Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
For PLA and PETG filament types
5-8 mm is optional for small prints that have bad adhesion to the build plate
Read the description on your filament roll
Read the description on your filament roll and increase this parameter for fast printers
You have to calibrate this parameter
Read the description on your filament roll and increase this parameter for fast printers
Read the description on your filament roll
This field is filled in according to your printer specifications when you add it to the slicer.
You can add custom G-code here for the start and end of the print. However, be careful - this is for advanced users only!
You have to calibrate your printer using Ge retraction test models
Retraction Length: For direct-drive setups use 0.5 mm to 2.5 mm; for Bowden extruders use 5 to 7 mm
This is how fast the filament is pulled back—40-60 mm/s for direct drive and 30-50 mm/s for Bowden setups.
You have to calibrate this parameter: Reduce it until the printer starts to hit the parts with the nozzle during printing, then increase it by 0.2.
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
To increase the strength of the print parts, use wall line count: 3
For pins and connectors use 50% Infill
These parameters are for standard PLA plastic. If you are using a different type of plastic, check the printing temperature recommended by the manufacturer. Also, read the description on your filament spool. For fast printers, add +30 °C to the current parameters.
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Use this value other than 0 if your nozzle catches on the internal infill during travel moves. Try to keep this value as low as possible in height.
Use normal supports to support large, straight surfaces (most mechanical or technical parts).
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Use 1 instead of 0 if your supports are thin and tall. They will be harder to remove, but much stronger.
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
Use tree supports to support complex objects, such as characters.
You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models.
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
Use a skirt for all parts when printing on outdated printers.
Use a brim when printing thin but tall parts, as well as parts with a small bed adhesion area.
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
for 0.2 Layer Height
But you can paint the seam if you want.
(for PLA and PETG)
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Enable this parameter if your model requires supports
(45-50 degree)You have to calibrate this parameter according to the capabilities of your printer
and your filament, using a Gambody test models.
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Top contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try
increasing this setting by 0.1-0,4 mm
Increase this parameter if the supports are hard to remove from walls
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
These settings only work for 3D printers with multiple extruders
You can try setting all parameters in this section, except the First layer, to values between 0.75% of your nozzle diameter and 1.25% of your nozzle diameter. Adjusting them will help you work out the optimal parameters for the best quality for your print. As for the First layer, you can set it to 150% of the diameter of your nozzle for better adhesion to the build plate (for a nozzle with a diameter of 0.4 mm, the First layer extrusion width can be from 0.3 mm to 0.5 mm)
For better printing quality you have to calibrate this parameter using Gambody test model.
Check your filament manufacturer's temperature recommendations on the spool.
Cooling parameters depends on the material you use for printing.
*for PLA
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
120-150% of your Layer Height
For 0.12 Layer Height
For 0.12 Layer Height
For pins and connectors use 50% Infill
Use skirt for outdated 3d printers
(5-8 mm is optional for small prints that have bad adhesion to the build plate)
Enable this parameter if your model requires supports
(45-60 degree)You have to calibrate this parameter according to the capabilities of your printer and your filament, using a Gambody test models
Contact Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise. Use the minimum value for outdated printers without acceleration calibration, and the maximum value for modern printers if you need it.
You have to calibrate this parameter from 0.9 to 1.1 according to the capabilities of your printer and your filament, using a Gambody test models.
Check your filament manufacturer's temperature recommendations on the spool.
Cooling parameters depends on the material you use for printing.
Calibrate this value if you need to reduce or improve the adhesion between the plastic and the heat bed
Your current nozzle diameter
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
Your current nozzle diameter
You have to calibrate this parameter using Gambody test models.
You need to calibrate this parameter using Gambody test models. These values are average values for a Direct Drive extruder; for a Bowden extruder, the values should be increased.
For better quality use 0.12 mm layer height, for fast printing use 0.2 mm layer height. For pins and the Ge connectors, use 0.2 layer height.
For 0,2 Layer Height
For 0,2 Layer Height
To increase the strength of the print parts, use Outline Perimeters: 3
You can enable this parameter to print rounded or spherical models, as well as character models.
Use this option only if your parts are too tight. but better calibrate your printer extrusion
Use this option only if your parts are too tight. but better calibrate your printer extrusion
Use 2 and more if you want to create skirt instead brim
1-2 for skirt and 10-20 for brim
Use for wipe nozzle if you need
Use For ABS filament
For pins and connectors use 50% Infill
Top Z distance = 1-1.3 layer Height. If the supports are hard to remove, try increasing this setting by 0.1-0,4 mm
Calibrate your filament and detect optimal temperature for it
Average temperature for PLA filament
The parameters in this tab vary greatly, it all depends on the quality of your printer. For example, if you have a classic Ender3, stick to the minimum parameters, but if you have a newer printer, for example Anycubic cobra 3 v3, you can select the maximum recommended values
Settings for advanced users, change these parameters only if you have sufficient 3D printing expertise.
DLP/SLA
- Please note: The DLP/SLA PDF assembly guide is currently being finalized and will be available as soon as possible.
- Symmetrical, snowflake-shaped city-ship layout with six piers, recessed bays, and central spires.
- Detailed outer decks with raised walkways, mechanical paneling, and perimeter stabilizer fins.
- Pier-end circular bay hatches with two assembly options: open or closed.
- Simplified assembly achieved by merging several structural elements together, resulting in more limited internal LED lighting capabilities compared to the FFF/FDM-adapted version.
- Hexagonal display stand with an optional, repositionable "Stargate Atlantis" nameplate.
- Resin maker tip: For enthusiasts seeking full lighting detail at a smaller footprint, the FFF/FDM "1.0 Initial" files can be printed on a resin printer at 50% scale (note that this significantly increases assembly complexity).
- The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots. Optionally, for added strength and rigidity, the static connections can be glued together.
- Some model parts use separate connectors (part "_37_pin_V1_X162_SLA" requires 162 copies; part "_83_pin_V2_X3_SLA" requires 3 copies).
FFF/FDM
- Symmetrical, snowflake-shaped city-ship layout with six piers, recessed bays, and central spires.
- Detailed outer decks with raised walkways, mechanical paneling, and perimeter stabilizer fins.
- Pier-end circular bay hatches with two assembly options: open or closed.
- Full hollow internal routing and perforated tower facades engineered for maximum LED lighting across interior channels and buildings.
- Hexagonal display stand with an optional, repositionable "Stargate Atlantis" nameplate.
- The assembly parts are connected using specially designed integrated connectors that fit securely into the corresponding slots. Optionally, for added strength and rigidity, the static connections can be glued together.
- Some model parts use separate connectors (part "_37_pin_V1_X162_FDM" requires 162 copies; part "_72_pin_V2_X3_FDM" requires 3 copies).


























