Poseidon STL File for 3D Printing

(1)
cm: 14.3 w x 14.4 d x 18.66 h
in: 5.63 w x 5.669 d x 7.346 h

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
POSEIDON (repaired).stl
27.96 MiB 37 h 50 min 22 m 145 x 143 x 187 Download

Here’s another video game god made ready for 3D printing. Poseidon 3D model features the might of the God of the Oceans.

Reining on the floor of the ocean, Poseidon dreams to plunge the entire world in wrathful seas, after having lost the competition for the city of mankind over to Athens.

Nevertheless, Poseidon has the sea creatures at his back and the sea tides at his command as allies and fearless companions in his rage.

Poseidon 3D model is stylized according to the video game character. The model is created in the Autodesk Maya 3D modeling program and is converted into STL file format. The STL file has undergone checking and correction in Netfabb, to ensure a seamless and accurate 3D printing.

The video game hero for 3D printing is provided with a support base and shows the restless waves at his command.

After having been 3D printed, the 3D model will stand 143mm wide, 186mm tall, and 144mm deep. The model is perfect as a table top piece or as a collectible.

Printing time: 1 day 10h

Printing material required: 22.70m

Detailed printing instructions for CURA 15.06 and Simplify3D are available for a correct 3D printing of the model.

*Please read the Printing Details information before starting to actually 3D print the model and make sure that your slicing program is configured correctly.

Buy Poseidon 3D model STL file by clicking the green Buy button in the top right corner of the 3D model’s slider. Provide your PayPal or credit card details and download the STL file of the mighty Poseidon 3D model.

Print Poseidon STL file with 3DHubs directly from our website. After having bought the STL file, tick the box next to the STL file and then click the Print with 3DHubs button.

________________________

On 28.11.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

Generic

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 28.11.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
avatar of Ryan Correl
From the same author:

Tags

heroes

Reviews

  • loading reviews..

Similar items

Browse more newly listed 3D printings