Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Horned Goat / Ibex Pendant — Heart Holding Figurine - STL file after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Horned Goat / Ibex Pendant — Heart Holding Figurine - STL file, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Horned Goat / Ibex Pendant — Heart Holding Figurine - STL file includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
3D model description
This charming horned goat / ibex pendant features stylized fur/linework, expressive eyes, curved horns and an integrated hanging loop — perfect as a pendant, keychain charm, ornament or small display statue. The sculpt holds a heart between its hooves and sits on an ornate round base. The mesh is clean, watertight and supplied as a single-piece STL optimized for both FDM and resin printing.
3D printing settings
FDM (Cura / PrusaSlicer) — recommended slicer settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for best surface detail)
Perimeters / Walls: 2–3
Top/Bottom layers: 6–8
Infill: 10–20% (Gyroid or cubic)
Supports: Minimal — loop interior, slight undercuts under chin/hooves may need small supports depending on scale.
Orientation: Upright on the decorative base.
Adhesion: Brim recommended for small prints.
Filament: PLA recommended; PETG for increased toughness.
Estimated filament & time: ~60–160 g PLA and ~6–14 hours at 120 mm (highly dependent on printer & settings).
Resin (MSLA / SLA) — recommended settings
Layer height: 0.05–0.08 mm
Orientation: Tilt 10–25° to reduce flat peel areas and protect facial detail.
Supports: Small touchpoint supports on the back, underside and loop; avoid supports on the face and heart.
Estimated resin usage & time: ~30–110 mL resin; ~3–8 hours depending on size & machine.
