Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Peacock Heart Charm - STL file after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Peacock Heart Charm - STL file, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Peacock Heart Charm - STL file includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
| File name | Size (mm | in) | Size(mb) | ||||
|---|---|---|---|---|---|---|
 | Meshy_AI_Heartfelt_Peacock_0117215838_texture.stlCalculation... | Size:Calculation... | File size: 43.63 mb | Printing Time / Filament: Calculation... | ||
3D model description
A cute, highly detailed peacock figurine holding a heart, sculpted with intricate feather patterns, decorative crest, stylized tail “eyes”, and ornate base. The model preserves all sculpted detail for faithful prints on both FDM and resin (SLA/DLP) machines — perfect as a pendant, keychain charm, desk ornament or collectible.
3D printing settings
🖨️ FDM (PLA / PETG) — recommended settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for finest detail)
Walls / Perimeters: 3–4
Infill: 10–20% (pendant) / 20–35% (display)
Supports: required under the crest, deep tail undercuts, underside of wings/feathers and the heart if printed attached
Orientation tip: print upright with a slight tilt (~5–15°) so supports attach to less visible rear areas; consider printing base and body separately to avoid support marks on the front details.
Print speed: 40–60 mm/s
🧪 Resin (SLA / DLP) — recommended settings
Layer height: 0.025–0.05 mm (0.05 mm typical)
Orientation: tilt 10–20° to avoid large flat facets and improve surface finish
Supports: fine supports under tail feathers, crest, heart underside and loop; place supports on low-visibility areas (back of tail/neck)
Post-processing: wash + cure per resin manufacturer; trim supports carefully to preserve feather detail
Resin printing is recommended for the highest-fidelity reproduction of feather texture and small ornamentation.
