Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Crocodile Holding Gift Basket after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Crocodile Holding Gift Basket, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Crocodile Holding Gift Basket includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
3D model description
A cute, stylized baby crocodile sitting upright and holding a decorative basket in its lap. The character features chibi-style proportions with a large rounded head, compact body, and short, chunky limbs. The crocodile has a wide snout with a gentle smile, big round eyes, small nostrils, and two tiny visible teeth. Soft rounded dorsal bumps run along the top of the head and back.
The arms rest on the rim of the basket, while the short legs extend forward with rounded feet and visible paw pads. A gently curved tail extends behind the body. The basket is bowl-shaped with a thick rounded rim, engraved leaf patterns around the sides, and a rope-style texture along the top edge. The overall design is smooth, friendly, and cartoon-like.
3D printing settings
FDM (Filament Printing)
Print in PLA or a similar filament. Use a layer height of 0.2 mm for standard quality or 0.16 mm for finer detail. Set 2–3 perimeters with a top and bottom thickness of at least 1.2 mm. Use 10–15% infill. Print the model upright, sitting flat on the build plate. Supports are optional; if used, enable light supports from the build plate only under the basket and arms. Add a small brim if extra adhesion is needed.
Resin Printing
Print with standard or ABS-like resin. Orient the model slightly tilted to reduce suction. Use a layer height of 0.05 mm for good detail or 0.03 mm for high detail. Add medium supports under the basket, chin, and feet. After printing, wash thoroughly, remove supports carefully, and fully cure according to resin manufacturer guidelines.
