Make pre-order

(2)
small
cm: 14.5 w x 9.1 d x 17.9 h
in: 5.709 w x 3.583 d x 7.047 h
3
BUY FOR  $14.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
Beetle_1.stl
30.68 MiB 14 h 41 min
8 m
Download
Beetle_2.stl
13.69 MiB 6 h 14 min
4 m
Download
Beetle_3.stl
20.20 MiB 8 h 53 min
6 m
Download
Beetle_4 (2).stl
36.09 MiB 2 h 4 min
1 m
Download
Beetle_5.stl
86.76 MiB n.a.
n.a.
Download
Beetle_Platform.stl
0.18 MiB 6 h 57 min
4 m
Download

Beetlejuice 3D model is inspired by the legendary character from the acclaimed comedy-fantasy movie. Knowing how loved the movie is, there was a thought to make the replica of the main character and his grave for 3D printing. 

The 3D model represents the character and his tombstone, with the inscription "Here Lies Betlegeuse" on it. 

The model is created in Autodesk Maya and ZBrush. It is saved in STL file format. The files are carefully checked and corrected in Netfabb and are made solid. You can use any slicing program to handle them and send them to your printer.

The Beetlejuice 3D model is a high poly model, with intricate details and fine surface shell. It is split into 6 parts, to make their printing easier. You will also save on printing material that usually is spent for supports.

After printing, the model will stand 145 mm wide, 179 mm tall, and 91 mm deep. Paint it to showcase the dark, yet comedic, atmosphere of the movie and use it as an item for your print collection or surprise your friend with an impressive 3D printed scene from his/her beloved movie.

Buy Beetlejuice 3D model for printing by clicking the green Buy button in the top-right corner of the model's page. Add the files to your shopping cart. Proceed to checkout. Pay securely with your credit card or PayPal. Once the payment is processed download the STL files in a .zip folder.

Note: Before starting to print the model, read the information provided in the Printing Details tab.

If you don't own a 3D printer, we can help. Use the services of our partners, 3DHubs or Treatstock, to print the model directly from our website. 

Advice: after printing the model use sanding paper to smooth its surface.

This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings:

Quality

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm

Shell

Wall Thickness: 0.8 mm
Wall Line Count: 2
Top/Bottom Thickness: 0.8 mm
Top Thickness: 0.8 mm
Top Layers: 8
Bottom Thickness: 0.8 mm
Bottom Layers: 8
Top/Bottom Pattern: Lines
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
Compensate Outer Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check
Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest

Infill

Infill Density: 25%
Infill Line Distance: 3.2 mm
Infill Pattern: Grid
Infill Overlap Percentage: 10%
Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check

Material

Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Standby Temperature: 175°C
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
Nozzle Switch Retract Speed: 20 mm/s
Nozzle Switch Prime Speed: 20 mm/s

Speed

Print Speed: 60 mm/s
Infill Speed: 80 mm/s
Wall Speed: 30 mm/s
Outer Wall Speed: 30 mm/s
Inner Wall Speed: 60 mm/s
Top/Bottom Speed 15 mm/s
Support Speed: 60 mm/s
Support Infill Speed: 60 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 15 mm/s
Initial Layer Print Speed: 15 mm/s
Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed 15 mm/s
Maximum Z Speed: 0 mm/s

Travel

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm

Cooling

Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Regular Fan Speed at Height: 0.3 mm
Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support

Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 30 %
Support Line Distance: 1.3333 mm
Support Z Distance: 0.1 mm
Support Top Distance: 0.1 mm
Support Bottom Distance: 0.1 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion

Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
Brim Line Count: 20
Brim Only on Outside: Check

Mesh Fixes

Union Overlapping Volumes: Check

Special Modes

Print Sequence: All at Once
Surface Mode: Normal

Experimental

Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings