Premium Stock

Ursa Alpine Stalker 3D Printable Model | Static Model

(7)
cm: 14 w x 10 d x 18 h
in: 5.512 w x 3.937 d x 7.087 h

Source Files

|

Description

|

Printing Details

This 3D model consists of a file in StereoLithography (.STL) format that has been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
Alpine_Ursa (repaired) (r epaired).stl
56.92 MiB 80 h 8 min 57 m 196 x 137 x 140 Download

Ursa Alpine Stalker 3D printable model from the hugely popular videogame is an agile warrior with abilities to produce great damage to his target. Resembling a bear, the hero is able to single-handedly fight off the target and emerge victorious.

His bear claws are so impressive and powerful that they cut deep wounds in the enemy. Often, it is hard to survive the rage of the predator. 

This model showcases all these ferocious traits of the videogame character. Our 3D designers created a close reproduction of the character in line with the game graphics but with personal touches.

The model is available in static form, mounted on a watermarked support. The .STL files for 3D printing have been carefully checked and tested to ensure error-free and effortless printing experience. 

Buy Ursa Alpine 3D print files by simply clicking on the “Buy” button in the top-right corner of the page. Proceed to checkout by providing your PayPal account or credit card details and download the printing file.

Generic

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed: 30mm/s
  • Inner shell speed; 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 100mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: Check
  • Pattern: Lines
  • Line distance: 1.0mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings – by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
avatar of Vertex
From the same author:

Tags

dota-2, ursa, dota2

Reviews

  • loading reviews..

Similar items

Browse more newly listed 3D printings