es 
ua 
OK, this is awesome! the print is long and it does take a while to custom pain to get the cool look, but with my H2D made printing it easy. No waste with the dual colors. I was thinking of lighting this up but could not find a good way to do it with one battery source. One note to anyone else, follow the directions. I used 15% infill and it suggests 5 to 6 percent. This made this model almost 7lbs. I had to do a very solid mount. Great print!
Printed most of the model (at 200 odd pieces, I may have missed a few bits lol). Roughly put together, it looks amazing, not to mention much bugger than I imagined. I'm also currently programming up an Arduino mega for lighting, which is working out well, but not perfect due to limitations of both my knowledge , and limitations of the Arduino programming. The only thing I see that is missing is the fact that the instructions could be a little clearer as to if pieces should be glued together or not, obviously user choice works too though :). Pictures will come at some point when its completed, but its slow going due to the fact that I'm using a battery operated air brush, and only get about 20 mins at a time to paint it.
Quick little build, easy to put together, good separation for painting - though I kind of wish, since it seems mostly duplicated across the holidays, there'd be one "grogu holiday pack."
Noah is a class act and a pleasure to build his creations. The models are the best I’ve come Across for any Tron related model. His passion comes through his designs and the models are very well thought out. MUST BUY’S if your a fan of Tron or any futuristic vehicle design.
It is about time a decent model was produced of the USS Cygnus from Disney's "The Black Hole." The modeling of the files for the Cygnus is outstanding. All the parts print well and fit perfectly. The instructions are clear and concise. I'm using a Bambu Lab H2D to print the parts at .12 resolution. It will take some time to print all the parts out, but it is well worth the wait.
I loved UFO as a kid so I just had to get this model when I ordered my new Anycubic Kobra X. The model was so easy to print and for the most part very easy to colour. Final Result came out great!
I’m done with printing this model now, I had some small issues. Part of it did not fit, but they are correct it now and you can download them. I will share some details later on.For the lead trip, a 3 m length will be great. Maybe you should put this in explanation. I’m full attempt to make this model with more LED lightning. Therefore, I need to adjust some pieces. More to come later happy printing.
Please say a big 'Thank You' to Paul Walther the designer of the NX-01 Enterprise! The number of cables increases while adding Leds. The colors match the color of the led. Most of them are WS2812B leds. On this pic I used WAGO connectors and 0.14mm² cables. In the WAGOs are 30 cables atm. The outlet slot to the nacelle could be 5mm longer to make wiring easyer. Bernd
Very good STL model for print. It was a fun to make it and paint. Finished model is a great add on to my home cinema room and Alien's movies collection.
Amazing file to work with, the model was a real pleasure to print and paint. Everything fits perfectly and the final result is very satisfying.
The bust is amazing the detail is incredible and it fits together perfectly, I printed her in resin and supported her in a way so there is very little clean up, fur and suit text just pop can’t wait to paint !
I have always been a Event Horizon fan, loved the film and the ship was just brillant. When i saw this model I just had to buy it,, some advice DONT do what I did, I print everything out in Resin as it makes the models feel more of a thing for me, so I printed it out at 40% bigger then the print was meant to be, I now have a 5ft long Event Horizon model in my office and i dont know what to do with her,, lol Apart from that model is perfect easy to add lights, easy to put together,, just a perfect model. Leo is a very talented designer.
after building a few different models from Gambody, this one is my favorite. it is without a doubt the coolest model i have built, and i have been building models my whole life thanks for the enjoyment. cheers.
I printed this for my wife, as she is a huge Grogu fan. Painted the model in Snapmaker Orca slicer to print multicolor. Did all the parts separately and glued together. Printed mostly in Matte PLA from Overture. The biggest issues I had were in printing the candy cane and the hands. They do not like to print standing up to get the best detail, so I ended up orienting them laying down and using a raft with supports. Palms down with the hands, so the palms side is not the nicest looking because of the supports, but they are hidden by the coffee mug, so not terrible. The fit on everything was great and I look forward to printing the other versions of this for the different Holidays!
Das Teil war nicht einfach und ein bisschen Erfahrung mit Modellbau wäre hier sehr von Vorteil. Am Ende realisiert man erst, wie groß das Teil eigentlich ist. Ein großes Lob an die oder den Künstler, jedoch habe ich trotzdem eine kleine Kritik. Es wurde die Toilette vergessen?! Ich konnte das so nicht stehen lassen und musste notgedrungen eine Dixi Toilette mit in den Frachtraum nehmen.
fantastic For a die-hard fan, this model is an absolute must-have. It's a faithful recreation and even has the option to add internal lighting. I highly recommend it and I'm going to add it to my slicer right now!
I wait so long and untill now artist of the model not dissappoint me and help make some a little detail to accurate this Enterprise-E i said something bad or not good word and you will feel bad and not good. I am sorry Thank you for spending time and energy with this update 2.0 Thank you... :)
as per normal from this designer top quality and well worth the money. this is the second model i've had and definitely not the last
Given this is one of my favourite starships, I absolutely had to make it! I spent a looooong time (far longer than I'd like to admit) in Orca recolouring everything so this could be printed in full multi colour on the Snapmaker U1 :) This takes 105 hours in full colour with a tool changer, I would not recommend printing in colour on a none tool changing printer, but well worth putting the time in, as it took less time than masking and painting would have to get this just perfect :) I've added photo's of the build to feedback so you can see for yourself how well this build works :) ... Couldn't be happier with this!
I was a bit leery about printing something like this. But after the front body and cockpit was printed I knew it will be good looking. Here it is in pre-paint. Not sure of the colour scheme, yet.