Daemon Targaryen 3D Printing Figurine | Assembly

(3)
cm: 19.8 w x 18.4 d x 25.5 h
in: 7.795 w x 7.244 d x 10.039 h

Source Files

|

Description

|

Printing Details

This 3D figurine of Daemon Targaryen consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 4 versions of Daemon Targaryen STL files for FFF/FDM, DLP/SLA, DLP/SLA Eco, SLS - files for all versions are available for download after the purchase;
  • STL files of high-poly Daemon Targaryen Figurine for 3D printing consist of 78 files;
  • Sizes for:
  • FFF/FDM: 255 mm tall, 198 mm wide, 184 mm deep;
  • DLP/SLA/SLS: 128 mm tall, 99 mm wide, 92 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Bambu Studio, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
35.95 MiB 6 h 2 min 3 m 39 x 36 x 79 Download
2_head_in_helmet_FDM(repa ired).stl
37.37 MiB 6 h 9 min 3 m 42 x 39 x 82 Download
3_head_in_helmet_with_win gs_FDM(repaired).stl
37.41 MiB 6 h 12 min 3 m 42 x 39 x 82 Download
4_topknot_for_helmet_FDM( repaired).stl
14.36 MiB 1 h 32 min 1 m 18 x 59 x 27 Download
5_wing_R_for_helmet_FDM(r epaired).stl
15.91 MiB 24 min <1 m 23 x 20 x 23 Download
6_wing_L_for_helmet_FDM(r epaired).stl
15.56 MiB 26 min <1 m 22 x 20 x 24 Download
7_body_FDM(repaired).stl
54.46 MiB 11 h 47 min 7 m 55 x 44 x 82 Download
8_legs_FDM(repaired).stl
46.71 MiB 14 h 7 min 7 m 77 x 67 x 74 Download
9_arm_R_1_FDM(repaired).s tl
17.91 MiB 1 h 34 min 1 m 40 x 31 x 26 Download
10_arm_R_2_FDM(repaired). stl
17.36 MiB 1 h 46 min 1 m 25 x 24 x 46 Download
11_hand_R_FDM(repaired).s tl
13.33 MiB 27 min <1 m 13 x 17 x 22 Download
12_arm_L_1_FDM(repaired). stl
18.34 MiB 1 h 28 min 1 m 38 x 26 x 27 Download
13_arm_L_2_FDM(repaired). stl
18.33 MiB 1 h 12 min 1 m 25 x 23 x 36 Download
14_hand_L_FDM(repaired).s tl
13.05 MiB 33 min <1 m 15 x 17 x 23 Download
15_foot_R_FDM(repaired).s tl
19.29 MiB 3 h 9 min 2 m 43 x 35 x 63 Download
16_foot_L_FDM(repaired).s tl
20.15 MiB 3 h 6 min 2 m 31 x 44 x 63 Download
17_scapular_R_FDM(repaire d).stl
16.71 MiB 1 h 44 min 1 m 34 x 34 x 22 Download
18_scapular_L_FDM(repaire d).stl
19.04 MiB 1 h 10 min 1 m 31 x 33 x 22 Download
19_armor_on_leg_R_FDM(rep aired).stl
22.12 MiB 45 min <1 m 35 x 24 x 9 Download
20_armor_on_leg_L_FDM(rep aired).stl
22.25 MiB 43 min <1 m 35 x 24 x 8 Download
21_knee_pad_R_FDM(repaire d).stl
14.02 MiB 34 min <1 m 25 x 22 x 18 Download
22_knee_pad_L_FDM(repaire d).stl
14.18 MiB 32 min <1 m 24 x 22 x 18 Download
23_belt_1_FDM(repaired).s tl
7.07 MiB 13 min <1 m 10 x 6 x 43 Download
24_belt_2_FDM(repaired).s tl
4.53 MiB 9 min <1 m 5 x 6 x 38 Download
25_sword_FDM(repaired).st l
26.09 MiB 2 h 3 min 1 m 132 x 43 x 33 Download
26_sword_handle_FDM(repai red).stl
16.84 MiB 20 min <1 m 39 x 6 x 20 Download
27_shield_FDM(repaired).s tl
27.43 MiB 7 h 21 min 6 m 66 x 71 x 44 Download
28_shield_handle_FDM(repa ired).stl
4.58 MiB 14 min <1 m 7 x 19 x 15 Download
29_arrows_(x3)_FDM(repair ed).stl
3.53 MiB 25 min <1 m 62 x 5 x 23 Download
30_spear_FDM(repaired).st l
8.02 MiB 27 min <1 m 6 x 59 x 25 Download
31_platform_FDM(repaired) .stl
35.45 MiB 43 h 11 min 22 m 176 x 175 x 73 Download
32_ge_lock_10H(x1)_FDM(re paired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
33_ge_lock_7S(x2)_FDM(rep aired).stl
0.02 MiB 4 min <1 m 18 x 7 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
...

ABOUT THIS 3D MODEL

Daemon Targaryen from House of Dragon has the fame of a great warrior: the younger brother of King Viserys I Targaryen perfectly wields the Dark Sister, the Valyrian steel light blade sword, he rides Caraxes, a fearsome and experienced dragon, and shows himself as a dashing and daring fighter who surpasses his enemies in the battles. Reckless and often ruthless against his opponents, Daemon,  in contrast, is loyal and attentive to his family and his army.

The figurine of Daemon Targaryen for 3D printing created by our contributing 3D artist perfectly depicts the appearance of the character as the resemblance with Daemon is striking: the facial features of the prince are easily recognizable, its knight armor is made with great precision and detail, and the chosen scene takes the viewer to the events of the movie letting see the swordsman in a middle of a battle. It is impossible to miss out on the beauty of the equipment of the warrior: in his left hand, Daemon holds a massive Targaryen shield with the depiction of a three-headed dragon Tiamat, his right-hand holds ancestral Dark Sister sword, and the head of the Valyrian is protected with a winged Targaryan helmet with dragon symbolics. This figurine is pure art and one can feel only delight and adoration when printing it, there is no doubt! 

ADAPTATION FOR 3D PRINTING

Daemon Targaryen for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 68 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the prince to be depicted harmoniously in the intended pose.

The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Daemon was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Daemon Targaryen 3D printing figurine.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The figurine’s scale was calculated from the height of the character. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 versions features:

  • Contains 33 parts;
  • A printed figurine is 255 mm tall, 198 mm wide, 184 mm deep;
  • 3 variants of the head - in a winged Targaryen Helmet, in a plain Targaryen Helmet, and without a helmet;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 versions features:

  • Contains 19 parts;
  • A printed figurine is 128 mm tall, 99 mm wide, 92 mm deep;
  • 3 variants of the head - in a winged Targaryen Helmet, in a plain Targaryen Helmet, and without a helmet;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 versions features:

  • Contains 19 parts;
  • A printed figurine is 128 mm tall, 99 mm wide, 92 mm deep;
  • 3 variants of the head - in a winged Targaryen Helmet, in a plain Targaryen Helmet, and without a helmet;
  • Some parts are manually hollowed out to save resin.

SLS 1.0 versions features:

  • Contains 7 parts - the variants of the solid figurine on and separately from the platform.

You can get the figurine of Daemon Targaryen for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Daemon Targaryen 3D Printing Figurine on Gambody YouTube channel.

Also, you may like other TV Series and Game of Thrones 3D Printing Models.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.1. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings