Make pre-order

cm: 71.8 w x 100 d x 24.4 h
in: 28.268 w x 39.37 d x 9.606 h
BUY FOR  $14.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Download parts br_BR_01 and decor_D_13 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
decor_D_1 (repaired) (rep aired).stl
0.28 MiB 2 h 32 min
1 m
decor_D_2 (repaired) (rep aired).stl
0.47 MiB 3 h 39 min
2 m
decor_D_3 (repaired) (rep aired).stl
0.27 MiB 2 h 45 min
1 m
decor_D_13 (repaired) (re paired).stl
0.08 MiB 10 h 24 min
8 m
decor_D_14 (repaired) (re paired).stl
0.05 MiB 4 h 50 min
3 m
gun_G_02 (repaired) (repa ired).stl
1.12 MiB 2 h 16 min
1 m
br_BR_01 (repaired) (repa ired).stl
0.74 MiB 4 h 46 min
3 m
br_BR_02 (repaired) (repa ired).stl
0.38 MiB 3 h 11 min
2 m
br_BR_03 (repaired) (repa ired).stl
0.19 MiB 9 h 38 min
7 m
br_BR_04 (repaired) (repa ired).stl
0.14 MiB 3 h 31 min
2 m
br_BR_05 (repaired) (repa ired).stl
0.05 MiB 11 min
<1 m
br_BR_06 (repaired) (repa ired).stl
0.05 MiB 11 min
<1 m
br_BR_07 (repaired) (repa ired).stl
0.18 MiB 8 min
<1 m
br_BR_08 (repaired) (repa ired).stl
0.13 MiB 9 min
<1 m
br_BR_09 (repaired) (repa ired).stl
0.18 MiB 8 min
<1 m
br_BR_10 (repaired) (repa ired).stl
0.13 MiB 9 min
<1 m

Kit 5 of Millennium Falcon 3D model consists of boarding ramp, gun and décor elements. We’ve considered designing a highly functional boarding ramp, which opens and closes, and consists of 9 separate parts. The parts must be joined together and mounted onto Millennium Falcon 3D model. Kit 5 also comprises the bottom gun that is mounted on the underpart of the ship, and additional décor elements for the bottom hull of the ship.

The entire kit consists of 16 detailed parts. The parts can be downloaded in STL file format. The files have been adapted for SLA/SLS and FFF 3d printers and are error-free.

To buy kit 5 of Millennium Falcon 3D print model, which is made up of boarding ramp, gun and décor elements, click on the “Buy” button. Proceed to checkout and insert your PayPal account or credit card details. Once the payment is processed you will be able to download the files.

See other Millennium Falcon exterior kits:

Kit 1 -  Landing Gear

Kit 2 - Engine Vents

Kit 3 - Gun, Antenna

Kit 4 - Tracery, Docking Ring

This model was tested in Cura 15.06. To avoid printing problems, we recommend these printing settings:

  • Quality:
  • Layer height 0.1mm
  • Initial layer thickness 0.3mm
  • Bottom/top pattern: lines
  • Horizontal expansion: 0.04mm (when entering 0.04 index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed: 30mm/s
  • Inner shell speed: 20mm/s
  • Top/Bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill Pattern: Grid
  • Line Distance: 3mm
  • Infill Overlap: 20%
  • Infill Layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle - 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: Check
  • Pattern: Lines
  • Line distance: 1.5mm

Platform Adhesion:

  • Type: Brim
  • Brim Line Count: 7 (up to 20, depending on the model’s height)

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.


All parts will be printed on the built plate in such a way as to save PLA material, to keep to print pattern and to cut printing time, while avoiding quality loss.

All basic settings by default.


comments powered by Disqus

Similar items

Browse more newly listed 3D printings