es 
ua 
I spent agonising hours printing paul as a distraction for my family - my name is paul and they associate me with the alien because i love marmite. It took ages on a couple of ender 3s. Painted it outside, 20 minutes someone stole it - that is how good this print is. Excellent file and setup, easy to print, harder to stick together on the head LOL. I am going to print it again but this time mod the file for magnet fitting of the head pieces making the process easier. If you want a life size paul then have at it, fun and always a pleaser, there are no faults with this model at all which I love.
I think this build has more detail than the original studio model (LOL). It made me happy to find the Heart of Gold and now it sits with pride on my desk at work. I actually scaled this one down to roughly 1:1000 and even though it's smallish even the tiny windows printed out well.
I have just finsihed with Saimons SR-1 and half way through the SR-2 and I cant tell you enough just how good these models are, The thought and effort put into them is just AWESOME. I have been looking for a long time for a good model of the Normandy and when i saw this one i just had to have it. If he makes any more models from the ME Uni i will be there buying them up for sure.
very well supported, hollowed, etc. nicely detailed as well. wish the instructions were a little more clear on the assembly options but they were enough to figure it out
Very detailed model, accurately made but the best bit..... I scaled it to 1:1 and all files held perfectly and now I enjoy a full size light up terminator. In addition it is not too hard to slightly mod the files to add servos or motors. I love it when people come round it scares the living soul out of them LOL. You cant ask for a better file, ive seen many terminator files and this by far is the best.
Jak dla mnie absolutnie niesamowity model, jego szczegółowe przygotowanie i odwzorowanie. W pierwszej wersji miał to być model wydrukowany w skali 150%, jednak w wyniku mojej pomyłki zostały wydrukowane dwie wersje: 150 % i 225%. Obie wyszły fantastycznie. Model wart każdego centa i każdego grama filamentu.
Amazing model. Not 100% screen accurate but very close. Printed nicely with resin and the pieces went together smoothly. I made him about 35cm tall. I didn't print the base as I wanted him to be free standing. Keep up the good work.
Merci beaucoup pour ce modèle. Il est vraiment magnifique. Je l'imprime en PETG HS ERYONE, nozzle en 0.25 et layer en 0.06 mm sur Flashforge ADM 5 PRO. Patrice
This is my first entry into 3d printing a model. I usually work with styrene kits. I'm very impressed the quality and detail of the print. The parts need minimal post print processing to create really good fit and finish. Question for the modelling team, is there any opportunity to get a new version of part 27/28? One that say ROCINANTE on it like in season six of the show?
I printed this for my wife, as she is a huge Grogu fan. Painted the model in Snapmaker Orca slicer to print multicolor. Did all the parts separately and glued together. Printed mostly in Matte PLA from Overture. The biggest issues I had were in printing the candy cane and the hands. They do not like to print standing up to get the best detail, so I ended up orienting them laying down and using a raft with supports. Palms down with the hands, so the palms side is not the nicest looking because of the supports, but they are hidden by the coffee mug, so not terrible. The fit on everything was great and I look forward to printing the other versions of this for the different Holidays!
after building a few different models from Gambody, this one is my favorite. it is without a doubt the coolest model i have built, and i have been building models my whole life thanks for the enjoyment. cheers.
Printed this first version and was completely satisfied. Month later returned to download, so as I could improve my first attempt. Surprise! The model had been improved and it's amazing. I love this model. Many thanks!
Quick little build, easy to put together, good separation for painting - though I kind of wish, since it seems mostly duplicated across the holidays, there'd be one "grogu holiday pack."
It is about time a decent model was produced of the USS Cygnus from Disney's "The Black Hole." The modeling of the files for the Cygnus is outstanding. All the parts print well and fit perfectly. The instructions are clear and concise. I'm using a Bambu Lab H2D to print the parts at .12 resolution. It will take some time to print all the parts out, but it is well worth the wait.
The fit and finish is phenomenal. The pieces fit together very, very well. That said, the recommended print settings are *very* slow; I would probably experiment with speeding them up if I were to reprint this (not a negative; for anyone that sees this later).
Modello semplice,dettagli semplici,alla fine ha solo la tunica,però sinceramente fa la sua bella figura.Inutile dire che il risultato finale dipende molto dalla bravura di chi lo stampa ( senza far vedere i gli attacchi dei supporti ) e sopratutto di chi lo dipinge,quello fa tutta la differenza del mondo,per me sinceramente è un bel modello.
Awesome model - makes for a great display piece. Printed everything full size on my Ender 3 S1-Plus. Pieces fit together nicely and any imperfections from joining pieces aren't visibly noticeable. One design flaw was found in the joining wing pieces - the alignment holes don't all line up. Not a big deal as there are two and it holds it together until you glue in the panels just fine. Need to go back and watch Rebels now!
Not the best picture but awesome model with great detail. Thanks. Printed it on Creality k1c without presets and didn't have any problems.
Printed most of the model (at 200 odd pieces, I may have missed a few bits lol). Roughly put together, it looks amazing, not to mention much bugger than I imagined. I'm also currently programming up an Arduino mega for lighting, which is working out well, but not perfect due to limitations of both my knowledge , and limitations of the Arduino programming. The only thing I see that is missing is the fact that the instructions could be a little clearer as to if pieces should be glued together or not, obviously user choice works too though :). Pictures will come at some point when its completed, but its slow going due to the fact that I'm using a battery operated air brush, and only get about 20 mins at a time to paint it.
Saw this on Andor and loved it! I printed this out quickly and chose the in-flight view.. going to double the size and print this out in landed mode which should be cool. might have to buy a bigger house to keep all of these things in! :) Awesome job! anyways I wanted to post pics but this site is very particular about size, so maybe later..