Premium Stock

Ghostface Scream 3D Printing Figurine | Assembly

(2)
cm: 13.1 w x 12.5 d x 25 h
in: 5.157 w x 4.921 d x 9.843 h

Source Files

|

Description

|

Printing Details

This 3D Model of Scream consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 8 versions of Scream STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
  • STL files of high-poly Scream 3D Figurine for 3D printing consist of 72 files;
  • Sizes for:

FFF/FDM Classic: 250 mm tall, 131 mm wide, 125 mm deep;

FFF/FDM Grinning: 247 mm tall, 124 mm wide, 100 mm deep;

DLP/SLA/SLS Classic: 125 mm tall, 66 mm wide, 63 mm deep;

DLP/SLA/SLS Grinning: 124 mm tall, 62 mm wide, 50 mm deep;

  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.
  • Detailed information about this 3D printing model is available in the DESCRIPTION section.
File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
21.81 MiB 4 h 16 min 2 m 37 x 42 x 51 Download
2_mask_FDM(repaired).stl
15.72 MiB 45 min <1 m 21 x 40 x 20 Download
3_body_FDM(repaired).stl
39.39 MiB 31 h 35 min 19 m 94 x 68 x 184 Download
4_arm_R_FDM(repaired).stl
24.75 MiB 3 h 28 min 2 m 56 x 36 x 52 Download
5_hand_R_FDM(repaired).st l
25.91 MiB 41 min <1 m 15 x 18 x 25 Download
6_knife_FDM(repaired).stl
8.38 MiB 35 min <1 m 5 x 68 x 30 Download
7_arm_L_FDM(repaired).stl
23.07 MiB 2 h 12 min 1 m 37 x 31 x 45 Download
8_hand_L_FDM(repaired).st l
17.00 MiB 31 min <1 m 18 x 17 x 26 Download
10_apparel_L_arm_FDM(repa ired).stl
21.31 MiB 4 h 13 min 2 m 29 x 46 x 83 Download
11_leg_R_FDM(repaired).st l
23.76 MiB 1 h 24 min 1 m 27 x 34 x 53 Download
12_leg_L_FDM(repaired).st l
24.38 MiB 1 h 17 min 1 m 25 x 38 x 48 Download
13_platform_FDM(repaired) .stl
33.22 MiB 10 h 19 min 6 m 100 x 100 x 24 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
9_apparel_R_arm_FDM(repai red).stl
20.40 MiB 5 h 30 min 3 m 26 x 113 x 60 Download
...

ABOUT THIS 3D MODEL

Ghostface, the main antagonist of the Scream film series, is one of the most recognizable villains of all time. The sinister figure with an anguish face is hunting for his victims without giving them a chance to escape. The eight-inch hunting knife is the main offensive weapon of the Ghostface, this is the knife that makes the killer so fatally dangerous. The silent stalker is unstoppable and goes to the end in achieving his malicious intentions and committing massacres.

Inspired by the iconic antagonist, our contributing artist created the Scream figurine for 3D printing. The model can be printed in a classic or grinning pose. In the classic pose, the figurine is depicted with a knife resembling the movie scenes. The alternative, grinning version, will be perfect for prank fans, we are sure that this Scream you have not expected! 

ADAPTATION FOR 3D PRINTING

Scream for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 33 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the horror icon to be depicted harmoniously in the intended pose.

The model’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Scream was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to Scream.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the height of the Scream which is 1780 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS’ SPECIFICATIONS

FFF/FDM Classic & Grinning 1.0 versions features:

  • You can choose between the two designs - Classic Scream and Grinning Scream
  • Both versions consist of 13 parts each;
  • A printed model in Classic version is 250 mm tall, 131 mm wide, 125 mm deep;
  • A printed model in Grinning version is 247 mm tall, 124 mm wide, 100 mm deep;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA Classic & Grinning 1.0 versions features:

  • You can choose between the two designs - Classic Scream and Grinning Scream;
  • Contain 9 and 10 parts respectively;
  • A printed model in Classic version is 125 mm tall, 66 mm wide, 63 mm deep;
  • A printed model in Grinning version is 124 mm tall, 62 mm wide, 50 mm deep;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco Classic & Grinning 1.0 versions features:

  • You can choose between the two designs - Classic Scream and Grinning Scream;
  • Contain 9 and 10 parts respectively;
  • A printed model in Classic version is 125 mm tall, 66 mm wide, 63 mm deep;
  • A printed model in Grinning version is 124 mm tall, 62 mm wide, 50 mm deep;
  • Some parts are manually hollowed out to save resin.

SLS Classic & Grinning 1.0 versions features:

  • You can choose between the two designs - Classic Scream and Grinning Scream;
  • A printed model in Classic version is 125 mm tall, 66 mm wide, 63 mm deep;
  • A printed model in Grinning version is 124 mm tall, 62 mm wide, 50 mm deep;
  • Contain 3 and 5 parts respectively - a solid Scream figurine with and without the platform.

You can get the model of Scream for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Scream 3D Printing Figurine on Gambody YouTube channel.

Also, you may like the Horror figurines for 3D Printing.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings