es 
ua 
I printed this for my wife, as she is a huge Grogu fan. Painted the model in Snapmaker Orca slicer to print multicolor. Did all the parts separately and glued together. Printed mostly in Matte PLA from Overture. The biggest issues I had were in printing the candy cane and the hands. They do not like to print standing up to get the best detail, so I ended up orienting them laying down and using a raft with supports. Palms down with the hands, so the palms side is not the nicest looking because of the supports, but they are hidden by the coffee mug, so not terrible. The fit on everything was great and I look forward to printing the other versions of this for the different Holidays!
Awesome model - makes for a great display piece. Printed everything full size on my Ender 3 S1-Plus. Pieces fit together nicely and any imperfections from joining pieces aren't visibly noticeable. One design flaw was found in the joining wing pieces - the alignment holes don't all line up. Not a big deal as there are two and it holds it together until you glue in the panels just fine. Need to go back and watch Rebels now!
OK, this is awesome! the print is long and it does take a while to custom pain to get the cool look, but with my H2D made printing it easy. No waste with the dual colors. I was thinking of lighting this up but could not find a good way to do it with one battery source.
One note to anyone else, follow the directions. I used 15% infill and it suggests 5 to 6 percent. This made this model almost 7lbs. I had to do a very solid mount. Great print!
One of my first print for the friend of my daughter, Doom Mask. Turned out great, friend was very happy liked my painting, too (although I think could have been much better).
While still waiting for resin stock to print this I was very impressed with the detail of the model and have since purchased the Hyper jump ring to go with it.
Not the best picture but awesome model with great detail. Thanks. Printed it on Creality k1c without presets and didn't have any problems.
I was a bit leery about printing something like this. But after the front body and cockpit was printed I knew it will be good looking.
Here it is in pre-paint. Not sure of the colour scheme, yet.
Still building this, keep coming up with different ways of printing parts🤪 having great results using "Painting" multicolor parts in Bambu to bring greater detail ..see pics.
Ran into small problem, but the creator promptly corrected got back to me with an update to the part file 👍
Did it with Bambulab P2S and black PLA, using the parameters for Bambulab.
First printed the head top with transparent filament but it was not has clear has in the picture here so painted glossy black making it more realistic.
Everything fit 100% no sanding or grinding but I stil used cryacinate liquid glue.
Thanks for this well done
Modello semplice,dettagli semplici,alla fine ha solo la tunica,però sinceramente fa la sua bella figura.Inutile dire che il risultato finale dipende molto dalla bravura di chi lo stampa ( senza far vedere i gli attacchi dei supporti ) e sopratutto di chi lo dipinge,quello fa tutta la differenza del mondo,per me sinceramente è un bel modello.
Saw this on Andor and loved it! I printed this out quickly and chose the in-flight view.. going to double the size and print this out in landed mode which should be cool. might have to buy a bigger house to keep all of these things in! :) Awesome job! anyways I wanted to post pics but this site is very particular about size, so maybe later..
I love robocop,. alike most other prints from Gambody I upscale them and this was no different. 1:1 scale and file integrity held perfectly. The detail is epic but i also like both heads with and without helmet so I can change them at will whenever the feeling takes me. You wont be disappointed!
Jak dla mnie absolutnie niesamowity model, jego szczegółowe przygotowanie i odwzorowanie. W pierwszej wersji miał to być model wydrukowany w skali 150%, jednak w wyniku mojej pomyłki zostały wydrukowane dwie wersje: 150 % i 225%. Obie wyszły fantastycznie. Model wart każdego centa i każdego grama filamentu.
I've always wanted this APC. Many times I was on the brink of buying a toy online. When it came to Gambody, I attempted printing it right away, but my bedslinger printers did it no justice. I was not until I bout a Core XY printer that I was able to pull it off. I roughed mine up with weathering and decided not to light it up. I went with a 200% upscale. My print measures over 22 inches long. A great model.
very well supported, hollowed, etc. nicely detailed as well. wish the instructions were a little more clear on the assembly options but they were enough to figure it out
An absolute monster of a build. And it has great details And the addon packages makes this exceptional detailed an fun print. I is estimated to use 11kg of filament and 750 hours of print time on my Bambu A1.
Great detailed build came out great, I was able to add some LED to the nose and nacelles.They turned out okay,the whole build look pretty slick. Good detailed build.I think im going to go with the bird of prey next.
Just finihsed printing and its massive, I printed the FDM version but in Resin (As i like pain), and its HUGE, but massivly detailed, every print i would look it over and was just speachless. I would 100% recomend if youre a B5 fan to buy this with out doubt BUY IT. Keph is a talented designer and i cant wait for what he comes up with next, Im also going to make sure everyone knows about this model and how good it is.
Noah is a class act and a pleasure to build his creations. The models are the best I’ve come Across for any Tron related model. His passion comes through his designs and the models are very well thought out. MUST BUY’S if your a fan of Tron or any futuristic vehicle design.
Very good STL model for print. It was a fun to make it and paint. Finished model is a great add on to my home cinema room and Alien's movies collection.