es 
ua 
This is my first entry into 3d printing a model. I usually work with styrene kits. I'm very impressed the quality and detail of the print. The parts need minimal post print processing to create really good fit and finish.
Question for the modelling team, is there any opportunity to get a new version of part 27/28? One that say ROCINANTE on it like in season six of the show?
The print files are perfectly prepared and beautifully sliced, making the 3D‑printing process smooth and trouble‑free. I was especially impressed by the level of detail – every little fold, contour, and expression comes out beautifully and gives the final model a truly high‑quality look.
I can 100% recommend this file. Anyone looking to print a Baby Yoda model that not only looks great but is also technically well‑designed will be more than satisfied.
The model is absolutely beautiful, and I truly appreciate the hard work that went into creating it. I do have one suggestion that I hope the designer might consider. I love adding fiber-optic lighting to my builds. my Star Destroyer has over 700 individual lights, and people always comment on how incredible it looks. It would be amazing if the sides of the model could be opened up or designed with accessible sections so fiber-optic lighting can be installed throughout. Having that flexibility would take the build to another level, and I’d love to be able to exibit next to the star destroyer.
Printed most of the model (at 200 odd pieces, I may have missed a few bits lol). Roughly put together, it looks amazing, not to mention much bugger than I imagined. I'm also currently programming up an Arduino mega for lighting, which is working out well, but not perfect due to limitations of both my knowledge , and limitations of the Arduino programming. The only thing I see that is missing is the fact that the instructions could be a little clearer as to if pieces should be glued together or not, obviously user choice works too though :). Pictures will come at some point when its completed, but its slow going due to the fact that I'm using a battery operated air brush, and only get about 20 mins at a time to paint it.
Very detailed model, accurately made but the best bit..... I scaled it to 1:1 and all files held perfectly and now I enjoy a full size light up terminator. In addition it is not too hard to slightly mod the files to add servos or motors. I love it when people come round it scares the living soul out of them LOL. You cant ask for a better file, ive seen many terminator files and this by far is the best.
This was a great build from start to finish with clear instruction notes, there was a few parts that had to be printed at different orientations to get the best results but overall a very detailed model. I have printed 2 time machines now and would recommend this model to anyone who is into classic sci fi.
Honestly what drew me to this model the most was the stand that comes with the elite add-on. Admittedly this was not a favorite TIE model in general, but as i built it it rapidly became one of my favorite ships! I'm working on an elite version and will post pix once those are done. all in all a great experience; well done!
Saw this on Andor and loved it! I printed this out quickly and chose the in-flight view.. going to double the size and print this out in landed mode which should be cool. might have to buy a bigger house to keep all of these things in! :) Awesome job! anyways I wanted to post pics but this site is very particular about size, so maybe later..
Amazing model. Not 100% screen accurate but very close. Printed nicely with resin and the pieces went together smoothly. I made him about 35cm tall. I didn't print the base as I wanted him to be free standing. Keep up the good work.
The bust is amazing the detail is incredible and it fits together perfectly, I printed her in resin and supported her in a way so there is very little clean up, fur and suit text just pop can’t wait to paint !
as per normal from this designer top quality and well worth the money. this is the second model i've had and definitely not the last
I finally finished this Liberator print and assembly using my 420x420x500 Anycubic Kobra 3 Max and 3v2from to colour print all of the external pieces so no manual painting would be required. I also blew the scale up as high as I could go with these machines so that it finally measured 58" Long x 36" wide and 36" tall (approx). Due to the weight, I couldn't use the supplied optional stand, so I had to make my own using TinkerCAD.
I've linked to a series of Youtube videos showing how it was built. I love the detail on this and it is the best available Liberator model I've found online. If you do scale this up like I have then remember to increase the infill to provide additional strength. I had a problem where my original struts snapped and I had to reprint them 75% infill to take the strain from the weight and angle from the nacelles. There is almost a whole 1Kg spool of filament used in each strut, so they are as solid as rock.
Unfortunately, the main body was done with a mixture of 10-15% infill in an attempt to keep it light, but it turned out to be too little to support a model of this size and you can year the PLA creaking when the model is handled and the area around the orange/yellow panels is the weak point for the model. I'm worried that hanging it from the ceiling could cause the model to snap at this point, so I grabbed a pen, paper and ruler, loaded up TinkerCAD and started designing a table mount that would take the strain. After a few prototypes, I came up with something that supports the body from underneath and also takes some of the weight off the lower struts. In addition, I made 2 large tubes to insert into the model's main body from the engine side which added a lot of structural support and provided a way to mount a light source for the green globes.
I'm going to give some credit to my trusty Elegoo Neptune 4 Max for making the majority of the display stand, which also utilized a stand I had made for an ACE Pro to save time. The internal tubes were done on my Centauri Carbon and FLSun T1 for speed. PVC pipe glue was used for the assembly.
If you decide to print in colour like I did then remember you're going to need to "paint" the parts in Orca yourself. If you're going to paint it in the traditional way then printing time will be way less. If you do decide to go big then consider where you will display it. This model is almost 5 foot long and stretches almost 3 foot wide and tall. In hindsight, I think I should have done it at 75% of that scale, but I love a good challenge.
Remember, Series 3 is due soon on BluRay!!! Here's the video link and a picture of the final model:
https://www.youtube.com/playlist?list=PLxHXVKY50McOLQnnYB183dVTBRoHMFI3G
Been meaning to print this for a while but too tiny as standard so printing it at 200% and it is huge lol. Only snag I came to is the socket fittings dont screw in properly. Overall though epic model to print. Once I have more free printer time I will 500% this model. I like how the chest and the back fit together with pegs, I modded my file to take 5x2mm magnets instead to make it easier for battery replacement and repairs without having to hope it stays ion place or glue. If like me obsessed with pacific rim & robots then buy it dont hesitate lol
This was my frist big 3D print on my Bambu Labs H2S. Rafael3D was very helpful with helping me at parts that I was confused about. I will provide some feedback in some areas that I noticed in the assmebly guide. Rafael3D also gave me some convex lenses for the eyes, but I have not tried them out yet. I need to figure out how to dial in settings for transparent filament. Pretty happy!
Not the best picture but awesome model with great detail. Thanks. Printed it on Creality k1c without presets and didn't have any problems.
While still waiting for resin stock to print this I was very impressed with the detail of the model and have since purchased the Hyper jump ring to go with it.
I love robocop,. alike most other prints from Gambody I upscale them and this was no different. 1:1 scale and file integrity held perfectly. The detail is epic but i also like both heads with and without helmet so I can change them at will whenever the feeling takes me. You wont be disappointed!
Now with this new version of GamBody, I am finally able to leave a comment for this great model by Paul.
It's been almost three years since I bought the first edition of Paul, and in the meantime I've been able to easily download two new updates for the model free of charge – the lifetime support is fantastic!
The many parts are printed on three different printers – at that time, an Artillery Genius, a Viper, and a JGAURORA.
The assembly took me over a year, as I constantly had to figure out how to achieve sufficient stability for Paul. The thin legs, the large head... He was supposed to be detachable, in three sections – head, torso, and legs.
After many hours of filling and painting, he actually stood up on his little legs by himself. A fantastic experience.
I’m done with printing this model now, I had some small issues. Part of it did not fit, but they are correct it now and you can download them. I will share some details later on.For the lead trip, a 3 m length will be great. Maybe you should put this in explanation.
I’m full attempt to make this model with more LED lightning. Therefore, I need to adjust some pieces.
More to come later happy printing.
An absolute monster of a build. And it has great details And the addon packages makes this exceptional detailed an fun print. I is estimated to use 11kg of filament and 750 hours of print time on my Bambu A1.