es 
ua 
This was a great build from start to finish with clear instruction notes, there was a few parts that had to be printed at different orientations to get the best results but overall a very detailed model. I have printed 2 time machines now and would recommend this model to anyone who is into classic sci fi.
Modello fatto molto bene, i dettagli si vedono l'armatura è perfetta (Stampato con Elegoo Saturn 4 Ultra 16K e Resina ABS Like 3.0 8K Space Grey) ho riempito 4 piastre e consumato all'incirca 600ml di resina, ora mi sto divertendo a pitturarlo!
Amazing model. Not 100% screen accurate but very close. Printed nicely with resin and the pieces went together smoothly. I made him about 35cm tall. I didn't print the base as I wanted him to be free standing. Keep up the good work.
I have always been a Event Horizon fan, loved the film and the ship was just brillant. When i saw this model I just had to buy it,, some advice DONT do what I did, I print everything out in Resin as it makes the models feel more of a thing for me, so I printed it out at 40% bigger then the print was meant to be, I now have a 5ft long Event Horizon model in my office and i dont know what to do with her,, lol Apart from that model is perfect easy to add lights, easy to put together,, just a perfect model. Leo is a very talented designer.
Printed this first version and was completely satisfied. Month later returned to download, so as I could improve my first attempt. Surprise! The model had been improved and it's amazing. I love this model. Many thanks!
I upscaled the FFF model from 100 to 150. Detail turned out amazing. I still have to add the antennas. But these should provide a good idea.
I had zero issues withthe model or any settings. Printed on my Saturn with ABS like resin, with a vat heater at 85F. Beatiful prints, no issues withassembly or any failures of any kind.I love the size of the figures, great for display!
Been meaning to print this for a while but too tiny as standard so printing it at 200% and it is huge lol. Only snag I came to is the socket fittings dont screw in properly. Overall though epic model to print. Once I have more free printer time I will 500% this model. I like how the chest and the back fit together with pegs, I modded my file to take 5x2mm magnets instead to make it easier for battery replacement and repairs without having to hope it stays ion place or glue. If like me obsessed with pacific rim & robots then buy it dont hesitate lol
Honestly what drew me to this model the most was the stand that comes with the elite add-on. Admittedly this was not a favorite TIE model in general, but as i built it it rapidly became one of my favorite ships! I'm working on an elite version and will post pix once those are done. all in all a great experience; well done!
One of my first print for the friend of my daughter, Doom Mask. Turned out great, friend was very happy liked my painting, too (although I think could have been much better).
I printed this for my wife, as she is a huge Grogu fan. Painted the model in Snapmaker Orca slicer to print multicolor. Did all the parts separately and glued together. Printed mostly in Matte PLA from Overture. The biggest issues I had were in printing the candy cane and the hands. They do not like to print standing up to get the best detail, so I ended up orienting them laying down and using a raft with supports. Palms down with the hands, so the palms side is not the nicest looking because of the supports, but they are hidden by the coffee mug, so not terrible. The fit on everything was great and I look forward to printing the other versions of this for the different Holidays!
Had such a great time making Paul! Instructions were perfect, easy to understand. Support answered all my questions in a timely manner. Am purchasing more files from the best stl file site on the planet, GAMBODY!
I spent agonising hours printing paul as a distraction for my family - my name is paul and they associate me with the alien because i love marmite. It took ages on a couple of ender 3s. Painted it outside, 20 minutes someone stole it - that is how good this print is.
Excellent file and setup, easy to print, harder to stick together on the head LOL. I am going to print it again but this time mod the file for magnet fitting of the head pieces making the process easier. If you want a life size paul then have at it, fun and always a pleaser, there are no faults with this model at all which I love.
Printed most of the model (at 200 odd pieces, I may have missed a few bits lol). Roughly put together, it looks amazing, not to mention much bugger than I imagined. I'm also currently programming up an Arduino mega for lighting, which is working out well, but not perfect due to limitations of both my knowledge , and limitations of the Arduino programming. The only thing I see that is missing is the fact that the instructions could be a little clearer as to if pieces should be glued together or not, obviously user choice works too though :). Pictures will come at some point when its completed, but its slow going due to the fact that I'm using a battery operated air brush, and only get about 20 mins at a time to paint it.
Saw this on Andor and loved it! I printed this out quickly and chose the in-flight view.. going to double the size and print this out in landed mode which should be cool. might have to buy a bigger house to keep all of these things in! :) Awesome job! anyways I wanted to post pics but this site is very particular about size, so maybe later..
The print files are perfectly prepared and beautifully sliced, making the 3D‑printing process smooth and trouble‑free. I was especially impressed by the level of detail – every little fold, contour, and expression comes out beautifully and gives the final model a truly high‑quality look.
I can 100% recommend this file. Anyone looking to print a Baby Yoda model that not only looks great but is also technically well‑designed will be more than satisfied.
This is my first entry into 3d printing a model. I usually work with styrene kits. I'm very impressed the quality and detail of the print. The parts need minimal post print processing to create really good fit and finish.
Question for the modelling team, is there any opportunity to get a new version of part 27/28? One that say ROCINANTE on it like in season six of the show?
As with all the other models I’ve gotten from Gambody, these files printed perfectly. I’d been wanting an F14 model since I started printing a year ago. You guys should do more ships from Star Gate series like the BC-304 Daedalus and Prometheus.
Not the best picture but awesome model with great detail. Thanks. Printed it on Creality k1c without presets and didn't have any problems.
Noah is a class act and a pleasure to build his creations. The models are the best I’ve come Across for any Tron related model. His passion comes through his designs and the models are very well thought out. MUST BUY’S if your a fan of Tron or any futuristic vehicle design.