This should take overall.
Balrog 3D Printing Figurine in Diorama | Assembly
Source Files
Description
Printing Details
This 3D figurine of Balrog consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
WHAT WILL YOU GET AFTER PURCHASE?
- 10 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS - files for all versions are available for download after the purchase;
- STL files of high-poly detailed figurine of Balrog consist of 309 files;
- Sizes for:
- FFF/FDM: 700 mm tall,716 mm wide, 634 mm deep;
- DLP/SLA: 350 mm tall, 358 mm wide, 317 mm deep;
- Detailed settings that we provide as a recommendation for Cura, Bambu Studio, PrusaSlicer, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.Files for each version are available for download after the purchase.
Detailed information about this model is available in the DESCRIPTION section.
ABOUT THIS 3D FIGURINE
The Balrogs were originally Maiar, but once seduced by Melkor and brought under his command, they became his most terrible servants, having the form of huge fiery demons, quintessential terror. While Balrogs were mostly destroyed during the War of Wrath, the last surviving Balrog, Durin’s Bane, found refuge in the caves of the Misty Mountains. As the Fellowship of the Ring was moving through the mines of Moria, the Balrog attacked them and became faced with Gandalf, also a Maia. Though this was a battle of equals in strength and power, Gandalf managed to defeat his enemy and threw him off the peak, but the fight cost him his own life as well.
The Balrog 3D printing figurine completes the diorama "Gandalf the Grey vs Balrog" and alternatively can be displayed as an individual collectible. The 3D artist put tremendous effort into creating this unique project that has a great quality, authentic look, and perfectly conveys the mood of the battle episode. Don't wait another minute and replenish your LOTR collection with this stunning figurine!
ADAPTATION FOR 3D PRINTING
Balrog for 3D printing is a static assembly figurine and its moderation and adaptation for different types of 3D printers took the Gambody team 65 hours in total. The figurines' anatomy and proportions were thoroughly reviewed during the moderation process for the monster to be depicted harmoniously in the intended pose.
The figurine’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the figurine are connected, Balrog was divided into convenient assembly parts.
All assembly parts in the FFF/FDM 2.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 2.0 and DLP/SLA 2.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly Video” and "Assembly Manual" before getting down to Balrog 3D printing figurine in diorama.
The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.
The model's scale was calculated from Balrog's actual height that is 5000 mm. The 3D printing figurine's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.
VERSIONS' SPECIFICATIONS
FFF/FDM 2.0 version features:
- Contains 68 parts;
- A printed figurine is 700 mm tall, 716 mm wide, 634 mm deep;
- The figurine features new, upgraded design;
- Enhanced level of detail;
- 2 variants of weapons: a flaming sword and a fire whip;
- Gandalf the Grey and Balrog can combine in a diorama. Gandalf the Grey is sold separately.
DLP/SLA 2.0 and DLP/SLA Eco 2.0 versions' features:
- Each contains 49 parts;
- A printed figurine is 350 mm tall, 358 mm wide, 317 mm deep;
- The figurine features new, upgraded design;
- Enhanced level of detail;
- 2 variants of weapons: a flaming sword and a fire whip;
- DLP/SLA Eco 2.0 contains some hollowed out parts to save resin;
- Gandalf the Grey and Balrog can combine in a diorama. Gandalf the Grey is sold separately.
SLS 2.0 version features:
- Contains 3 parts - solid Balrog figurine with a sword and a whip and a platform.
FFF/FDM 1.0 version features:
- Contains 59 parts;
- A printed model is 707 mm tall, 721 mm wide, 640 mm deep;
- Assembly kit includes locks to connect the model's parts securely without glue. One lock _Ge_lock_10H_(x108) needs to be printed 108 times; lock 6_Ge_lock_7S_(x5) needs to be printed 5 times;
- Made with a platform to resemble the character's iconic battle with Gandalf the Grey;
- All parts are divided in such a way that you will print them with the smallest number of support structures.
DLP/SLA 1.0 version features:
- Contains 15 parts;
- A printed model is 354 mm tall, 361 mm wide, 320 mm deep;
- Made with a platform to resemble the character's iconic battle with Gandalf the Grey;
- All parts are divided in such a way to fit the build plates and to make sure that support structures are generated where needed.
DLP/SLA Eco 1.0 version features:
- Contains 15 parts;
- A printed model is 354 mm tall, 361 mm wide, 320 mm deep;
- Made with a platform to resemble the character's iconic battle with Gandalf the Grey;
- Contains some hollowed out parts to save resin.
DLP/SLA 1.1 and DLP/SLA Eco 1.1 versions features:
- Each contains 23 parts;
- A printed model is 354 mm tall, 361 mm wide, 320 mm deep;
- These updated versions were cut into more assembly parts for all of them to fit the build plates of the smallest DLP/SLA printers;
- Made with a platform to resemble the character's iconic battle with Gandalf the Grey;
- DLP/SLA Eco 1.1 contains some hollowed out parts to save resin.
SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 354 mm tall, 361 mm wide, 320 mm deep;
- Contains 2 parts - one-piece Balrog figurine with the platform separated.
You can get the figurine of Balrog for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.
Watch the tutorial on how to assemble Balrog 3D Printing Figurine at Gambody YouTube channel.
Also, you may like other The Lord of the Rings 3D Printing Figurines as well as Gandalf 3D Printing Figurine that completes the diorama.
_______
FAQ:
Generic
Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.
Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.
Note:
You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
All connectors should be printed at 100% Infill.
Bambu Lab printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.
To avoid printing problems, we recommend the following settings: download
Cura printing recommendations:
These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.
To avoid printing problems, we recommend the following settings: download
Simplify3D printing recommendations:
These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.
To avoid printing problems, we recommend the following settings: download
Slic3r printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.
To avoid printing problems, we recommend the following settings: download
PrusaSlicer printing recommendations:
These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.
To avoid printing problems, we recommend the following settings: download
Tags
diorama, horror, tolkien, demon, advent22, sauron, gandalf, john, balrog, maiar, misty-mountain, lord-of-the-rings, lotr, monster, sword, whip, gandalf-balrog, midweek, melkor, durin, durins-bane, moria, zirakzigil, eru-iluvatar, demonic, whip-of-many-thongs
Reviews
Similar items
Inappropriate Content Form
You are about to report Balrog 3D Printing Figurine in Diorama | Assembly for violating our Terms and Conditions. Please take a few moments to fill in the following information.
Comments
comments powered by Disqus