Premium Stock

Batman 1989 3D Printing Figurine | Assembly

(8)
cm: 17.3 w x 10.8 d x 26 h
in: 6.811 w x 4.252 d x 10.236 h

Source Files

|

Description

|

Printing Details

This 3D Model of Batman 1989 consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 5 versions of Batman 1989 STL files for FFF/FDM and DLP/SLA - files for all versions are available for download after the purchase;
  • STL files of high-poly Batman 1989 3D Model for 3D printing consist of 79 files;
  • Sizes for:
  • FFF/FDM (Bat-Signal platform, short cape) : 295 mm tall, 122 mm wide, 132  mm deep;
  • FFF/FDM (Bat-Signal platform, long cape): 295  mm tall, 196 mm wide, 132 mm deep;
  • FFF/FDM (Batcave platform, short cape): 260 mm tall, 122 mm wide, 117 mm deep;
  • FFF/FDM (Batcave platform, long cape): 260 mm tall, 173 mm wide, 108 mm deep;
  • DLP/SLA (Bat-Signal platform, short cape) : 148 mm tall, 61 mm wide, 66 mm deep;
  • DLP/SLA (Bat-Signal platform, long cape) : 148 mm tall, 98 mm wide, 66 mm deep;
  • DLP/SLA (Batcave platform, short cape) : 130 mm tall, 61 mm wide, 59 mm deep;
  • DLP/SLA (Batcave platform, long cape) : 130 mm tall, 130 mm wide, 54 mm deep;
  • Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF and video formats;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D, Slic3r and PrusaSlicer for the best print;
  • Full technical support from the Gambody Support Team.

Detailed information about this 3D printing model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_V_1_for_cloack_V_1 _FDM(repaired).stl
45.89 MiB 3 h 20 min 2 m 47 x 39 x 55 Download
3_head_V_1_for_cloack_V_2 _FDM(repaired).stl
45.38 MiB 3 h 20 min 2 m 47 x 39 x 55 Download
5_body_FDM(repaired).stl
55.61 MiB 6 h 47 min 4 m 63 x 41 x 59 Download
6_legs_FDM(repaired).stl
35.84 MiB 6 h 10 min 3 m 51 x 81 x 96 Download
7_arm_R_FDM(repaired).stl
31.70 MiB 1 h 9 min 1 m 22 x 19 x 50 Download
8_hand_R_FDM(repaired).st l
19.82 MiB 28 min <1 m 15 x 15 x 25 Download
9_arm_L_FDM(repaired).stl
34.34 MiB 1 h 16 min 1 m 15 x 23 x 54 Download
10_hand_L_FDM(repaired).s tl
20.27 MiB 26 min <1 m 11 x 15 x 22 Download
11_foot_R_FDM(repaired).s tl
25.08 MiB 1 h 37 min 1 m 22 x 34 x 49 Download
12_foot_L_FDM(repaired).s tl
27.07 MiB 1 h 35 min 1 m 26 x 32 x 52 Download
13_batman_logo_on_chest_F DM(repaired).stl
10.73 MiB 11 min <1 m 17 x 11 x 7 Download
14_belt_buckle_FDM(repair ed).stl
19.09 MiB 8 min <1 m 15 x 12 x 5 Download
15_knee_pad_R_FDM(repaire d).stl
10.92 MiB 8 min <1 m 11 x 14 x 6 Download
16_knee_pad_L_FDM(repaire d).stl
10.67 MiB 8 min <1 m 10 x 14 x 6 Download
17_cloack_V_1_FDM(repaire d).stl
58.62 MiB 27 h 8 min 18 m 121 x 79 x 165 Download
18_cloack_V_2_solid_FDM(r epaired).stl
45.76 MiB 25 h 50 min 17 m 171 x 86 x 185 Download
19_cloack_V_2_top_FDM(rep aired).stl
42.78 MiB 10 h 1 min 7 m 87 x 50 x 93 Download
20_cloack_V_2_low_FDM(rep aired).stl
32.69 MiB 14 h 11 min 9 m 124 x 111 x 108 Download
21_platform_V_1_FDM(repai red).stl
57.80 MiB 14 h 28 min 8 m 95 x 90 x 64 Download
22_platform_V_2_FDM(repai red).stl
53.46 MiB 41 h 30 min 24 m 121 x 124 x 73 Download
23_spotlight_for_platform _V_2_FDM(repaired).stl
22.85 MiB 5 h 32 min 3 m 71 x 71 x 30 Download
24_spotlight_front_part_f or_platform_V_2_FDM(repai red).stl
14.91 MiB 1 h 52 min 1 m 55 x 55 x 9 Download
25_spotlight_rear_part_fo r_platform_V_2_FDM(repair ed).stl
8.26 MiB 2 h 11 min 1 m 55 x 55 x 15 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
2_head_V_2_for_cloack_V_1 _FDM(repaired).stl
45.50 MiB 3 h 2 min 2 m 51 x 39 x 61 Download
4_head_V_2_for_cloack_V_2 _FDM(repaired).stl
44.90 MiB 2 h 58 min 2 m 51 x 40 x 61 Download
...

ABOUT THIS 3D MODEL

Directed by Tim Burton, Batman 1989 was the first installment of the Batman film series. Having witnessed his parents’ murder as a child, millionaire Bruce Wane (played by Michael Keaton) devotes his life to fighting crime in Gotham City. Bruce hides his secret identity, nobody knows who conceals himself behind the mask of Batman. The superhero, who seeks justice against criminals has to fight his arch-enemy, maddened and eccentric Joker and protect his love.

Inspired by the all-time favourite superhero, our contributing 3D artists created this amazing figurine of Batman 1989 for 3D printing. The model has two stylised platforms - Batcave and Bat-Signal, featuring the secret headquarters of Batman and his famous distress signal. The dark superhero can be displayed with or without the face mask, the second version depicts the performer of the role, Michael Keaton. This incredible 3D printing figurine is a must for all fans of the best Batman movie!

ADAPTATION FOR 3D PRINTING

Batman 1989 for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took the Gambody team 29 hours in total. 

For you to receive the cleanest 3D printing result possible, and minimize the amount of filament needed for generated support, the figurine was divided into convenient assembly parts.

All assembly parts in the FFF/FDM 1.0 version are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any model's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. We highly recommend that you get acquainted with the “Assembly video” and "Assembly Manual" before getting down to Batman 1989.

The model is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model’s scale was calculated from the height of Batman 1989 which is 1750 mm. The 3D printing figurine’s chosen scales are 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA version.

VERSIONS’ SPECIFICATIONS

FFF/FDM 1.0 version features:

  • Contains 25 parts;
  • A printed model on the Bat-Signal platform in a short cape is 295 mm tall, 122 mm wide, 132  mm deep;
  • A printed model on the Bat-Signal platform in a long cape is 295  mm tall, 196 mm wide, 132 mm deep;
  • A printed model on the Batcave platform in a short cape is 260 mm tall, 122 mm wide, 117 mm deep;
  • A printed model on the Batcave platform in a long cape is 260 mm tall, 173 mm wide, 108 mm deep;
  • Two versions of the cape;
  • Four head options - with and without the mask for each cape version;
  • Two platform options;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

  • Contains 16 parts;
  • A printed model on the Bat-Signal platform in a short cape is 148 mm tall, 61 mm wide, 66 mm deep;
  • A printed model on the Bat-Signal platform in a long cape is 148 mm tall, 98 mm wide, 66 mm deep;
  • A printed model on the Batcave platform in a short cape is 130 mm tall, 61 mm wide, 59 mm deep;
  • A printed model on the Batcave platform in a long cape is 130 mm tall, 130 mm wide, 54 mm deep;
  • Two versions of the cape;
  • Four head options - with and without the mask for each cape version;
  • Two platform options;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA Eco 1.0 version features:

  • Contains 16 parts;
  • A printed model on the Bat-Signal platform in a short cape is 148 mm tall, 61 mm wide, 66 mm deep;
  • A printed model on the Bat-Signal platform in a long cape is 148 mm tall, 98 mm wide, 66 mm deep;
  • A printed model on the Batcave platform in a short cape is 130 mm tall, 61 mm wide, 59 mm deep;
  • A printed model on the Batcave platform in a long cape is 130 mm tall, 130 mm wide, 54 mm deep;
  • Two versions of the cape;
  • Four head options - with and without the mask for each cape version;
  • Two platform options;
  • Some parts are manually hollowed out to save resin.

DLP/SLA Pre-supported 1.0 version features:

  • Contains 16 parts;
  • A printed model is 130 mm tall, 130 mm wide, 54 mm deep;
  • The STL files that this version comprises are pre-supported, hollowed out, and have drain holes where needed;
  • You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
  • When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:

  • Contains 6 parts;
  • 4 options for diorama.

You can get the model of Batman 1989 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble the Batman 1989 3D Printing Model on Gambody YouTube channel.

Also, you may like the Batmobile 2022 and Batman vs Joker Bust, as well as DC Comics 3D printing models.

_______

FAQ: 

Generic

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings