Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Cute Bulldog Puppy Pendant — Heart Holding Figurine - STL file after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Cute Bulldog Puppy Pendant — Heart Holding Figurine - STL file, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Cute Bulldog Puppy Pendant — Heart Holding Figurine - STL file includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
| File name | Size (mm | in) | Size(mb) | ||||
|---|---|---|---|---|---|---|
 | Golden_Pup_with_Heart_1127163609_generate (1).stlCalculation... | Size:Calculation... | File size: 38.94 mb | Printing Time / Filament: Calculation... | ||
3D model description
Overview
This adorable bulldog-style puppy pendant holds a bright heart and sits on a decorative round base with an integrated hanging loop — perfect as a pendant, keychain charm, ornament, gift or small display statue. Sculpted with deep carved-style wrinkles and fine paw/face detail, the model is supplied as a clean, watertight single-piece STL and optimized for both FDM and resin printing.
3D printing settings
FDM (Cura, PrusaSlicer) — recommended settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm recommended for best wrinkle/fur fidelity)
Walls / perimeters: 2–3
Top / bottom: 6–8 layers
Infill: 10–20% (gyroid or cubic)
Supports: Minimal — may require supports under the loop interior, slight undercuts at chin/hands depending on scale.
Orientation: Upright on the decorative base.
Adhesion: Brim recommended for small prints.
Filament: PLA recommended; PETG for more durable prints.
Resin (MSLA / SLA) — recommended settings
Layer height: 0.05–0.08 mm
Orientation: Tilt 10–25° to reduce large flat faces and peeling forces; position to keep supports off the face/heart.
Supports: Use small touchpoint supports on the back and underside; avoid supports on the heart and front-facing features.
Estimates: ~3–8 hours and ~25–90 mL resin (depending on size & machine).
