Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Cute Cat Pendant — Heart Holding Figurine after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Cute Cat Pendant — Heart Holding Figurine, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Cute Cat Pendant — Heart Holding Figurine includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
| File name | Size (mm | in) | Size(mb) | ||||
|---|---|---|---|---|---|---|
 | Meshy_AI_Feline_Heart_Charm_0117210959_texture.stlCalculation... | Size:Calculation... | File size: 59.45 mb | Printing Time / Filament: Calculation... | ||
3D model description
This charming cat pendant features a lovingly sculpted, highly detailed fur surface, expressive eyes, and an integrated hanging loop — perfect as a pendant, keychain charm, ornament, or small display statue. The model sits on an ornate round base and is supplied as a clean, watertight single-piece STL optimized for both FDM and resin workflows.
3D printing settings
FDM (Cura / PrusaSlicer) — suggested settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm recommended for best fur/detail fidelity)
Walls / perimeters: 2–3
Top / bottom layers: 6–8
Infill: 10–20% (gyroid or cubic)
Supports: Minimal — add supports under the loop interior and any small undercuts flagged by your slicer (underside of hands/heart may need small supports at small scales).
Orientation: Upright with decorative base on the build plate.
Adhesion: Brim recommended for small/tall prints.
Filament: PLA recommended; PETG for added toughness.
Estimates: ~4–12 hours print time and ~40–150 g filament at 100–120 mm (depends on printer & settings).
Resin (MSLA / SLA) — suggested settings
Layer height: 0.05–0.08 mm
Orientation: Tilt model ~10–25° to reduce flat peel areas and spread support stress; orient to avoid supports on the face/heart if possible.
Supports: Use small touchpoint supports on the back and underside; avoid supports on the heart and other front-facing focal details.
Estimates: ~3–8 hours and ~25–90 mL resin depending on size & printer.
