Community (fb) 
es 
ua 
Files
3D model format
Stereolithography (.stl)
Total files
Slicer settings
not available
Mesh error check
not specified
Support
Provided by 3D Artist (optional)
Update requests
Subject to 3D Artist’s discretion
Model versions
FFF/FDM
Assembly method
not specified
Features
DLP/SLA
Assembly method
not specified
Features
Additional details
Part of diorama
No
Special pack included
No
You will get instant access to the STL files of Cute Elephant Pendant - Heart Holding 3D Printing Figurine after completing your purchase. Simply add the model to your cart and check out using PayPal, credit or debit card, Apple Pay, Google Pay, Alipay, or other available payment methods.
Watch the assembly video for Cute Elephant Pendant - Heart Holding 3D Printing Figurine, and explore more tutorials, behind-the-scenes content, 3D printing timelapses, and painting guides on the official Gambody YouTube channel.
This 3D model comes with StereoLithography (.STL) files optimized for 3D printing. You'll get digital files, not a physical product
Before printing, take a look at Printing Details for recommended settings and tips to achieve better results.
Cute Elephant Pendant - Heart Holding 3D Printing Figurine includes 2 version(s) for the supported 3D printer type(s): FFF/FDM, DLP/SLA. Files are available for download after purchase.
See the Description and Specifications sections for more details about this model.
3D model description
This charming elephant figurine holds a bright heart and includes a hanging loop — perfect as a pendant, ornament, keychain, or desktop mini. The model is sculpted with carved swirls and surface detail to give it a hand-painted/wood-carved look. Designed to print well on both FDM and resin printers.
3D printing settings
Print settings — FDM (PrusaSlicer / Cura recommended)
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 for best detail)
Perimeters / Walls: 2–3
Top / bottom layers: 6–8
Infill: 10–20% (gyroid or cubic)
Print orientation: Upright (base on build plate), loop at top.
Supports: Minimal — enable supports for the underside of the trunk and inside the deep ear cavities if your slicer flags them. A brim or raft recommended for small sizes to improve adhesion.
Adhesion: Brim for small prints; Raft optional for curved bases.
Estimated print time: ~8–12 hours at 120 mm tall (depends on layer height & printer speed).
Estimated filament usage: ~80–140 g PLA (approximate).
FDM slicing tips
If printing as a pendant, lowering infill and using a brim reduces stringing.
For maximum detail in the swirls, use 0.12 mm layers.
If ears overhang heavily in your scaled variant, rotate model slightly (5–15°) to reduce support contact on textured surfaces.
