Deathwing 3D Printing Figurine | Assembly

(23)
cm: 71.2 w x 30 d x 36.2 h
in: 28.031 w x 11.811 d x 14.252 h

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Deathwing 3D Printing Figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
21.13 MiB 14 h 45 min 8 m 122 x 50 x 95 Download
3_pelvis_FDM(repaired).st l
28.49 MiB 20 h 45 min 12 m 83 x 71 x 115 Download
4_arm_R_FDM(repaired).stl
26.35 MiB 27 h 30 min 20 m 77 x 169 x 103 Download
5_arm_L_FDM(repaired).stl
21.54 MiB 27 h 36 min 19 m 85 x 169 x 116 Download
6_hand_R_1_FDM(repaired). stl
26.62 MiB 5 h 23 min 3 m 44 x 42 x 96 Download
7_hand_R_2_FDM(repaired). stl
23.83 MiB 3 h 37 min 2 m 58 x 31 x 52 Download
8_hand_L_1_FDM(repaired). stl
25.25 MiB 5 h 4 min 3 m 46 x 38 x 95 Download
9_hand_L_2_FDM(repaired). stl
24.33 MiB 3 h 47 min 2 m 55 x 38 x 55 Download
10_leg_R_FDM(repaired).st l
25.23 MiB 11 h 19 min 7 m 93 x 62 x 56 Download
11_leg_L_FDM(repaired).st l
22.19 MiB 10 h 48 min 7 m 63 x 97 x 54 Download
12_foot_R_FDM(repaired).s tl
19.35 MiB 4 h 29 min 2 m 49 x 57 x 77 Download
13_foot_L_FDM(repaired).s tl
20.05 MiB 5 h 46 min 3 m 48 x 56 x 69 Download
14_tail_1_FDM(repaired).s tl
26.75 MiB 12 h 1 min 6 m 64 x 52 x 111 Download
15_tail_2_FDM(repaired).s tl
26.53 MiB 9 h 57 min 6 m 48 x 71 x 96 Download
16_tail_3_FDM(repaired).s tl
24.37 MiB 8 h 5 min 5 m 96 x 28 x 128 Download
17_wing_R_1_FDM(repaired) .stl
25.61 MiB 20 h 55 min 13 m 135 x 144 x 146 Download
18_wing_R_2_FDM(repaired) .stl
26.59 MiB 37 h 26 min 30 m 148 x 138 x 142 Download
19_wing_L_1_FDM(repaired) .stl
28.69 MiB 25 h 30 min 19 m 88 x 183 x 128 Download
20_wing_L_2_FDM(repaired) .stl
28.26 MiB 37 h 16 min 30 m 115 x 194 x 140 Download
21_jaw_low_FDM(repaired). stl
22.73 MiB 2 h 39 min 1 m 55 x 58 x 30 Download
22_jaw_top_FDM(repaired). stl
4.98 MiB 12 min <1 m 12 x 19 x 9 Download
23_tongue_FDM(repaired).s tl
6.67 MiB 13 min <1 m 11 x 10 x 21 Download
24_horn_1_FDM(repaired).s tl
12.47 MiB 39 min <1 m 29 x 31 x 16 Download
25_horn_2_FDM(repaired).s tl
10.15 MiB 2 h 46 min 2 m 33 x 45 x 83 Download
26_horn_3_FDM(repaired).s tl
9.82 MiB 2 h 36 min 2 m 33 x 43 x 84 Download
27_horn_4_FDM(repaired).s tl
8.56 MiB 36 min <1 m 32 x 16 x 42 Download
29_horn_6_FDM(repaired).s tl
6.22 MiB 26 min <1 m 25 x 11 x 29 Download
30_horn_7_FDM(repaired).s tl
6.12 MiB 25 min <1 m 14 x 21 x 30 Download
31_horn_8_FDM(repaired).s tl
4.53 MiB 11 min <1 m 10 x 16 x 20 Download
32_horn_9_FDM(repaired).s tl
4.66 MiB 12 min <1 m 9 x 17 x 21 Download
33_horn_10_FDM(repaired). stl
2.10 MiB 4 min <1 m 6 x 5 x 15 Download
34_horn_11_FDM(repaired). stl
2.54 MiB 5 min <1 m 7 x 5 x 17 Download
35_claw_from_wing_R_1_FDM (repaired).stl
6.12 MiB 52 min <1 m 18 x 30 x 46 Download
36_claw_from_wing_R_2_FDM (repaired).stl
6.99 MiB 21 min <1 m 10 x 19 x 26 Download
37_claw_from_wing_R_3_FDM (repaired).stl
2.62 MiB 7 min <1 m 8 x 9 x 17 Download
38_claw_from_wing_R_4_FDM (repaired).stl
1.46 MiB 3 min <1 m 10 x 5 x 11 Download
39_claw_from_wing_R_5_FDM (repaired).stl
25.91 MiB 15 min <1 m 12 x 17 x 21 Download
40_claw_from_wing_R_6_FDM (repaired).stl
28.04 MiB 15 min <1 m 17 x 12 x 21 Download
41_claw_from_wing_R_7_FDM (repaired).stl
30.63 MiB 16 min <1 m 23 x 12 x 19 Download
42_claw_from_wing_R_8_FDM (repaired).stl
4.57 MiB 36 min <1 m 15 x 34 x 65 Download
43_claw_from_wing_R_9_FDM (repaired).stl
3.30 MiB 28 min <1 m 9 x 16 x 54 Download
44_claw_from_wing_R_10_FD M(repaired).stl
3.49 MiB 24 min <1 m 9 x 23 x 48 Download
45_claw_from_wing_R_11_FD M(repaired).stl
2.90 MiB 29 min <1 m 9 x 23 x 38 Download
46_claw_from_wing_R_12_FD M(repaired).stl
2.46 MiB 15 min <1 m 10 x 7 x 29 Download
47_claw_from_wing_L_1_FDM (repaired).stl
5.78 MiB 55 min <1 m 34 x 19 x 45 Download
48_claw_from_wing_L_2_FDM (repaired).stl
8.84 MiB 20 min <1 m 10 x 14 x 29 Download
49_claw_from_wing_L_3_FDM (repaired).stl
3.15 MiB 6 min <1 m 9 x 8 x 16 Download
50_claw_from_wing_L_4_FDM (repaired).stl
1.74 MiB 4 min <1 m 6 x 9 x 13 Download
51_claw_from_wing_L_5_FDM (repaired).stl
3.32 MiB 14 min <1 m 11 x 20 x 18 Download
52_claw_from_wing_L_6_FDM (repaired).stl
3.66 MiB 15 min <1 m 12 x 19 x 20 Download
53_claw_from_wing_L_7_FDM (repaired).stl
3.65 MiB 16 min <1 m 23 x 12 x 19 Download
54_claw_from_wing_L_8_FDM (repaired).stl
4.54 MiB 42 min <1 m 42 x 17 x 62 Download
55_claw_from_wing_L_9_FDM (repaired).stl
5.17 MiB 29 min <1 m 12 x 18 x 55 Download
56_claw_from_wing_L_10_FD M(repaired).stl
3.54 MiB 26 min <1 m 9 x 14 x 51 Download
57_claw_from_wing_L_11_FD M(repaired).stl
4.38 MiB 30 min <1 m 9 x 22 x 40 Download
58_claw_from_wing_L_12_FD M(repaired).stl
6.06 MiB 14 min <1 m 10 x 14 x 28 Download
59_claw_from_arm_R_1_FDM( repaired).stl
4.26 MiB 6 min <1 m 13 x 7 x 14 Download
60_claw_from_arm_R_2_FDM( repaired).stl
4.57 MiB 7 min <1 m 10 x 10 x 16 Download
61_claw_from_arm_R_3_FDM( repaired).stl
4.45 MiB 7 min <1 m 10 x 9 x 14 Download
62_claw_from_arm_L_1_FDM( repaired).stl
2.98 MiB 6 min <1 m 12 x 7 x 13 Download
63_claw_from_arm_L_2_FDM( repaired).stl
3.34 MiB 7 min <1 m 11 x 8 x 16 Download
64_claw_from_arm_L_3_FDM( repaired).stl
3.10 MiB 6 min <1 m 9 x 9 x 15 Download
65_claw_from_leg_R_1_FDM( repaired).stl
4.56 MiB 14 min <1 m 17 x 9 x 15 Download
66_claw_from_leg_R_2_FDM( repaired).stl
5.02 MiB 15 min <1 m 11 x 7 x 23 Download
67_claw_from_leg_R_3_FDM( repaired).stl
4.41 MiB 15 min <1 m 15 x 9 x 20 Download
68_claw_from_leg_R_4_FDM( repaired).stl
2.35 MiB 6 min <1 m 10 x 7 x 13 Download
69_claw_from_leg_R_5_FDM( repaired).stl
1.87 MiB 4 min <1 m 5 x 5 x 12 Download
70_claw_from_leg_L_1_FDM( repaired).stl
5.14 MiB 19 min <1 m 14 x 12 x 20 Download
71_claw_from_leg_L_2_FDM( repaired).stl
6.57 MiB 22 min <1 m 13 x 11 x 23 Download
72_claw_from_leg_L_3_FDM( repaired).stl
4.99 MiB 17 min <1 m 11 x 9 x 24 Download
73_claw_from_leg_L_4_FDM( repaired).stl
1.65 MiB 4 min <1 m 6 x 6 x 13 Download
74_claw_from_leg_L_5_FDM( repaired).stl
1.99 MiB 4 min <1 m 6 x 5 x 13 Download
75_castle_1_FDM(repaired) .stl
9.83 MiB 1 h 27 min 1 m 45 x 45 x 28 Download
76_castle_2_FDM(repaired) .stl
9.79 MiB 1 h 27 min 1 m 45 x 45 x 28 Download
77_castle_3_FDM(repaired) .stl
25.92 MiB 6 h 60 min 4 m 35 x 35 x 78 Download
78_castle_4_FDM(repaired) .stl
25.85 MiB 6 h 56 min 4 m 35 x 35 x 78 Download
79_castle_5_FDM(repaired) .stl
28.75 MiB 14 h 31 min 8 m 135 x 56 x 46 Download
80_castle_6_FDM(repaired) .stl
23.08 MiB 29 h 54 min 17 m 160 x 62 x 77 Download
81_castle_7_FDM(repaired) .stl
12.97 MiB 28 min <1 m 67 x 16 x 8 Download
82_castle_8_FDM(repaired) .stl
23.16 MiB 41 h 9 min 24 m 91 x 98 x 92 Download
83_castle_9_FDM(repaired) .stl
25.70 MiB 43 h 24 min 26 m 92 x 98 x 92 Download
84_castle_10_FDM(repaired ).stl
21.71 MiB 20 h 57 min 12 m 91 x 98 x 81 Download
85_castle_11_FDM(repaired ).stl
25.22 MiB 25 h 55 min 15 m 92 x 102 x 86 Download
86_ge_lock_7S(x3)_FDM(rep aired).stl
0.02 MiB 3 min <1 m 7 x 18 x 2 Download
87_ge_lock_10H(x43)_FDM(r epaired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
4_v2_arm_R_1_FDM(repaired ).stl
25.62 MiB 14 h 35 min 9 m 74 x 97 x 73 Download
4_v2_arm_R_2_FDM(repaired ).stl
19.98 MiB 11 h 6 min 9 m 46 x 119 x 77 Download
5_v2_arm_L_1_FDM(repaired ).stl
25.78 MiB 15 h 9 min 9 m 84 x 92 x 69 Download
5_v2_arm_L_2_FDM(repaired ).stl
19.72 MiB 10 h 13 min 8 m 50 x 122 x 87 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min 1 m 150 x 18 x 5 Download
28_horn_5_FDM(repaired).s tl
8.01 MiB 35 min <1 m 29 x 15 x 44 Download
2_body_FDM(repaired).stl
32.98 MiB 69 h 28 min 42 m 149 x 91 x 138 Download
...

ABOUT THIS 3D FIGURINE

Deathwing, also commonly referred to as the Destroyer, used to be one of the five Dragon Aspects and the leader of the Black Dragonflight. Deathwing made his debut in the World of Warcraft franchise as a cameo appearance during one of the battles, and later, after being driven mad by the Old Gods, the Destroyer confronted the other Aspects during the War of the Ancients. This crucial moment changed the dragon’s nature, rendering him the Aspect of Death, which marked him with four armour plates and a molten heart full of magma. Being inspired by the ferocious dragon, the author of the Deathwing model for 3D printing spent 284 hours to depict the raging beast towering over the fragments of the Stormwind City castle. The Worldbreaker is known for carrying all living beings into their deaths, leaving no efforts to defeat him. The 3D artist skillfully emphasised the unstoppable power of Deathwing to unleash the destruction by spreading the dragon’s tremendous wings and depicting its sharp pounces and angry horns so very detailed. As if ready to scorch all the foes beneath the shadow of his wings, 3D printing Deathwing rises up over the collapsing towers, showcasing the fiery magma flowing beneath its scales. “A black, crag-covered mountain of scales” proved its ability to leave mere ashes of every enemy that was caught in the flames. Now by the means of 3D printing, you have a chance to capture the incredible moment and put the Deathwing model on your shelf!

ADAPTATION FOR 3D PRINTING

Deathwing figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 82 hours in total. The model’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin in the figurine’s Eco version. The Deathwing, as well as the fragment of the Stormwind castle, was divided into as many assembly parts as needed to fit even the smallest 3D printers' build plates and for you to nevertheless receive a large winged beast after assembly. In order to receive the cleanest result possible the creature’s upper jaw and the tongue were extracted from the mouth and are now provided as separate parts, as well as the beast’s lower metal jaw, all horns, talons on the end of each limb, every pounce, sharp crests on the head etc. Moreover, in order to conceal places where assembly parts of the model must be connected, the figurine was cut along the contour of Deathwing’s scorched scales’ seams. All assembly parts are provided in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. All parts have special connecting elements for you to assemble the figurine in the easiest way possible and there are locks provided to connect some details if you don’t want to glue the parts. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Deathwing's wingspan that is 365000 mm. The 3D printing figurine's chosen scale is 1/300 for the FFF/FDM version and 1/600 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 87 parts;
- A printed model is 362 mm tall, 712 mm wide, 300 mm deep;
- Comes with a platform to resemble a fragment of Stormwind City towers;
- Assembly kit includes locks to attach the figurine's parts securely without glue. Lock 86_ge_lock_7S(x3) needs to be printed 3 times; lock 87_ge_lock_10H(x43) needs to be printed 43 times
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 15 parts;
- A printed model is 181 mm tall, 356 mm wide, 150 mm deep;
- Comes with a platform to resemble a fragment of Stormwind City towers;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 15 parts;
- A printed model is 181 mm tall, 356 mm wide, 150 mm deep;
- Comes with a platform to resemble a fragment of Stormwind City towers;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 181 mm tall, 356 mm wide, 150 mm deep;
- Contains 2 parts - a one-piece Deathwing figurine with Stormwind Keep separated.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Deathwing​ 3D Figurine for 3D printing which consist of 119 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Deathwing​;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura , Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Deathwing​​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Deathwing​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other WoW 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

  • You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);
  • All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings