Make pre-order

cm: 10.517 w x 10.883 d x 16.02 h
in: 4.141 w x 4.285 d x 6.307 h
BUY FOR  $16.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
halo_Gun (repaired) (repa ired).stl
3.45 MiB 1 h 21 min
<1 m
halo_Master_chief(repaire d) (repaired).stl
55.84 MiB 37 h 38 min
25 m

Master Chief 3D model for printing is inspired by the fictional universe’s character and protagonist. The in-game character is never seen in his human appearance, always wearing his green armor and helmet. Master Chief is a biochemical and cybernetic supersoldier.

The character has a quiet and calm personality. He always does his work in the best way and walks away, showing no feelings.

The Master Chief 3D model depicts the video game character’s features in the best way. There's the bulky armor suit and the helmet that the video game characters most probably wears all the time to hide from the entire world.

The 3D printing files are created din Autodesk Maya modeling software and is converted into STL format. The STL files have been subject to thorough verification in Netfabb, to avoid any errors and defects.

The Master Chief 3D model files can be handled easily in any slicing program, such as Cura15.06 or Simpllify3D. The model is a high-poly one. The high number of polygons ensures that the model displays superb outer shell detailing.

The 3D gaming miniature comes with a base support to facilitate its display on the shelf or desktop.

The Master Chief 3D model will stand 105mm wide, 108mm deep, and 160mm tall. Paint it as you want and use it in your table top games.

Buy Master Chief 3D model STL files by clicking the Buy button in the top-right corner of the page. Proceed to checkout. Insert your PayPal or credit card details and download the STL files of the 3D video game character.

Note: You can now print your 3D model with 3DHubs directly from our marketplace. Click the Print with 3DHubs button, select the file you want to print and you will be redirected to 3DHubs website.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


Halo, Masterchief, Spartan, Gun, Hero, Game model, Static

Similar items

Browse more newly listed 3D printings