What game heroes would you like to see at gambody?
This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.
Before printing the files, we strongly recommend reading the PRINTING DETAILS section.
Female Shepard 3D model is made ready for 3D printing and stylized according to the female Commander from the popular video game. She is the female version for all those who prefer a tough character for their video game missions.
Female Shepard features the same armor, just like her male counterpart. The charcoal grey armor stresses and enhances the heroine’s silhouette. Despite all this, every fan of the video game can customize its character.
Our Commander Shepard 3D model may not be customizable, but it is definitely looking better than the prototype. All face and body features have been preserved to recreate a lifelike looking miniature of a brave Woman Commander.
Shepard 3D model is made ready for 3D printing using Autodesk Maya 3D modeling program. It is a high-poly model, reproducing every tiny detail of the video game prototype. The model is an inspiration and stylisation of the original character, with differences from the original made to ensure its 3D printability and to enhance 3D modeler’s own approach to the figurine.
The 3D printing miniature is exported in STL file. The file underwent thorough checking for errors in Netfabb. The 3D designer guarantees the error-free and accurate printing of the figurine.
The Female Shepard 3D model is available in a single STL file. It is a static model, coming on a support base to facilitate its display on the shelf or desktop.
After printing, the 3D model will stand 90mm wide, 91mm deep, and 160mm tall.
Download Commander Shepard 3D model STL file by clicking the green Buy button. Proceed to checkout, insert your credit card or PayPal details and buy an incredibly detailed 3D figurine, perfect for table top games at family reunions or friends gathering.
Note: You will download the files for the Female Shepard 3D model with and without the helmet.
Print Female Shepard directly from Gambody site with 3DHubs. Choose the file and click the Print with 3DHubs button. Follow the instructions provided by our 3D printing partner.
This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
- Layer height: 0.1mm*
- Initial layer thickness: 0.3mm
- Bottom/top pattern: lines
- Skin perimeter line count: 0
- Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.
The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.
- Infill speed: 50mm/s
- Outer shell speed : 30mm/s
- Inner shell speed: 20mm/s
- Top/bottom speed: 20mm/s
- Support speed: 50mm/s
- Travel speed: 150mm/s
- Skirt speed: 30mm/s
- Amount of slower layers: 4
- Infill pattern: Grid
- Line distance: 3mm
- Infill overlap: 20%
- Infill layers: 0
- Enable support: Check
- Placement: Everywhere
- Overhang angle: 30°
- X/Y distance: 0.7mm
- Top distance: 0.2mm
- Bottom distance: 0.2mm
- Stair step height: 0.5mm
- Join distance: 0.7mm
- Area smoothing: 0.6mm
- Use towers: check
- Pattern: Grid
- Line distance: 1.5mm
- Type: Brim
- Brim line count: 10 (up to 20, depending on the model’s height)
Other 3D printing recommendations:
Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.