Make pre-order

(3)
average
cm: 10.248 w x 10.116 d x 16.071 h
in: 4.035 w x 3.983 d x 6.327 h
3 BUY FOR  $29.99

Source Files

|

Description

|

Printing Details

These 3D models consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
gordon_Body (repaired) sm ooth (repaired).stl
32.73 MiB 24 h 54 min
16 m
Download
gordon_Crowbar_1 (repaire d) (repaired).stl
0.13 MiB 7 min
<1 m
Download
gordon P2_Body_2 (repaire d) (repaired).stl
33.78 MiB 25 h 3 min
16 m
Download
gordon P2_Gravity_Gun_2 ( repaired) (repaired).stl
2.36 MiB 2 h 12 min
1 m
Download

Gordon Freeman 3D model emerges from the hugely popular first-person shooter video game. As the main protagonist, Dr. Gordon Freeman takes up difficult and dangerous missions to defend himself and the entire human race against Aliens. He is a theoretical physicist, holding a PhD degree, but somehow finds himself in the middle of a battle that threatens humans.

The protagonist takes part in numerous challenges, fighting and eliminating aliens. He travels to the Xen world where he confronts and destroys the leader of Xen’s armies. But his mission doesn’t end there. Gordon Freeman will have to face danger bigger than he could ever imagine.

Its 3D printable figures depict him wearing his hazard suit, which has repeatedly saved him from terminal emissions. The 3D printable character is available in 2 different poses, in one holding a crowbar, and in the other - a gravity gun. Both weapons can be printed separately.

The STL files have been optimized for 3D printing and can be reproduced on all types of 3D printers: SLA/SLS and FFF.

Gordon Freeman action figure is 101.16mm deep, 102.48mm wide, and 160.71mm tall. You will need 20 h and almost 13m or 99g of filament to print it on your 3D printer. This is a High-Poly model, consisting of 350,000 polygons, the number being reduced from 500,000. Aside from this, you will need another 2 hours to print the gravity gun and 10 minutes for the crowbar.

The figurine is available in static form and is mounted on a watermarked support base. The STL files were checked and corrected in Netfabb and executed in CURA 15.06 and Repetier Host and measure 72 MB. You will be printing an error-free model of high detail accuracy.

Download Gordon Freeman 3D model by clicking on the “Buy” button in the top-right corner of the page. Proceed to checkout, enter your Paypal account or credit card details and get the STL files.

Print a hero that makes saving the human race his priority!

________________________

On 27.12.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 27.12.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 30mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 1.5mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Lines
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Embed code

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings