Make pre-order

Harry 3D Printing Figurine | Assembly

cm: 23.2 w x 27.8 d x 20.8 h
in: 9.134 w x 10.945 d x 8.189 h
BUY FOR  $24.99

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Harry 3D Printing Figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
15.97 MiB 2 h 4 min
1 m
27 x 35 x 39 Download
2_glasses_1_FDM(repaired) .stl
3.18 MiB 1 min
<1 m
14 x 6 x 1 Download
3_glasses_2_FDM(repaired) .stl
3.18 MiB 1 min
<1 m
2 x 13 x 1 Download
4_glasses_3_FDM(repaired) .stl
2.63 MiB 1 min
<1 m
1 x 13 x 1 Download
14.04 MiB 2 h 54 min
2 m
58 x 126 x 28 Download
14.39 MiB 16 h 4 min
11 m
71 x 138 x 94 Download
23.55 MiB 5 h 33 min
3 m
66 x 60 x 97 Download
11_arm_L_FDM(repaired).st l
14.48 MiB 2 h 49 min
2 m
29 x 67 x 36 Download
12_hand_L_FDM(repaired).s tl
11.29 MiB 21 min
<1 m
14 x 9 x 19 Download
14_foot_L_FDM(repaired).s tl
11.84 MiB 25 min
<1 m
31 x 13 x 14 Download
15_foot_R_FDM(repaired).s tl
11.86 MiB 26 min
<1 m
12 x 31 x 14 Download
16_owl_body_FDM(repaired) .stl
16.52 MiB 3 h 51 min
2 m
34 x 39 x 54 Download
17_wing_L_FDM(repaired).s tl
15.66 MiB 5 h 19 min
4 m
81 x 32 x 49 Download
18_wing_R_FDM(repaired).s tl
15.81 MiB 6 h 49 min
5 m
45 x 77 x 55 Download
3.86 MiB 49 min
<1 m
25 x 23 x 41 Download
20_chest_1_FDM(repaired). stl
13.20 MiB 5 h 8 min
3 m
62 x 53 x 34 Download
21_chest_2_FDM(repaired). stl
11.30 MiB 11 h 45 min
7 m
98 x 85 x 45 Download
22_chest_3_FDM(repaired). stl
13.18 MiB 14 h 7 min
8 m
70 x 91 x 56 Download
18.39 MiB 2 h 32 min
2 m
47 x 27 x 36 Download
24_platform_1_FDM(repaire d).stl
15.32 MiB 9 h 34 min
5 m
130 x 108 x 20 Download
25_platform_2_FDM(repaire d).stl
12.81 MiB 9 h 24 min
5 m
108 x 131 x 18 Download
26_platform_3_FDM(repaire d).stl
13.34 MiB 9 h 31 min
5 m
132 x 108 x 16 Download
27_platform_4_FDM(repaire d).stl
13.76 MiB 9 h 27 min
5 m
109 x 131 x 16 Download
28_ge_lock_S7(x13)_FDM(re paired).stl
0.02 MiB 3 min
<1 m
18 x 7 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download
29_glasses_solid_FDM(repa ired).stl
9.00 MiB 6 min
<1 m
20 x 13 x 6 Download
6_body_1_FDM(repaired).st l
30.70 MiB 7 h 43 min
4 m
66 x 46 x 59 Download
7_body_2_FDM(repaired).st l
28.13 MiB 2 h
1 m
30 x 41 x 35 Download
10_arm_R_FDM(repaired).st l
17.99 MiB 6 h 32 min
4 m
75 x 32 x 71 Download
13_magiс_wand_FDM(repair ed).stl
9.55 MiB 9 min
<1 m
4 x 4 x 59 Download


Harry James Potter, also known as The Boy Who Lived was prophesied at birth to be chosen as the greatest rival of Lord Voldemort, the one with the power to vanquish You-Know-Who and ultimately become a universally accepted hero. And what is more, not only would the wizarding world glorify the Chosen One’s heroic deeds, but those muggles who were lucky to avoid the International Statute of Secrecy would also celebrate the only known survivor of the Killing Curse and even come up with wonderful figurines for 3D printing. At midnight on Harry's eleventh birthday, a half-giant wizard Rubeus Hagrid personally delivered him a letter of acceptance to Hogwarts School of Witchcraft and Wizardry. That is when the young boy with a lightning-bolt scar on the forehead discovered the incredible truth about his identity and thus the fascinating life full of magic, happiness and tremendous losses and sacrifices began. Harry Potter would buy his first holly wand from Ollivander’s, be sorted into Gryffindor House, meet his lifelong friends, find a real family and even become the youngest Quidditch Seeker in over a century! The Boy Who Lived would also undergo many severe trials and face terrible misfortunes in his struggle against Lord Voldemort. And now for all the fans who grew up with J.K.Rowling’s series of fantasy novels, there is an amazing Harry Potter 3D printing figurine. The author of the model spent 135 hours to complete the project and depict the young wizard accompanied by the loyal snowy owl Hedwig who is sitting on the top of school trunks. For some reason, we are perfectly sure that once printed one would never store the amazing result in the cupboard beneath the staircase!


Harry figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 32 hours in total. Figurine’s anatomy was thoroughly reviewed during the moderation process for the young wizard to be depicted harmoniously in the intended magic performing pose. The model’s cutting was chosen by our team to minimise the amount of filament needed for generated support and some of the parts were hollowed out for you to save resin. For you to receive the cleanest results possible the magic wand was extracted from Harry’s hand and the boy’s glasses are provided as separate three-piece part. Besides, Harry’s scarf was ‘taken off’ as well to ensure nice printing result and is attached to the figurine only by the boy’s head. All school trunks that are piled up behind the wizard come as separate files for you to choose yourself the way to arrange them with the Hedwig on top. All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from Harry's actual height that is 1550 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.


FFF/FDM 1.0 version features:
- Contains 28 parts;
- A printed model is 208 mm tall, 232 mm wide, 278 mm deep;
- Assembly kit includes one lock 28_ge_lock_S7(x13)​ to attach the figurine's body to legs and connect the platform's parts securely without glue that needs to be printed 13 times;
- Made with a platform with school trunks stacked up and owl Hedwig sitting on top of them;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 12 parts;
- A printed model is 104 mm tall, 116 mm wide, 139 mm deep;
- Made with a platform with school trunks stacked up and owl Hedwig sitting on top of them;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 12 parts;
- A printed model is 104 mm tall, 116 mm wide, 139 mm deep;
- Made with a platform with school trunks stacked up and owl Hedwig sitting on top of them;
- Contains some hollowed out parts to save resin.

SLS 1.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 104 mm tall, 116 mm wide, 139 mm deep;
- Contains 3 parts - one-piece Harry and Hedwig figurines with the platform separated.


- STL files of Harry 3D Figurine for 3D printing which consist of 55 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Harry​;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Harry​ for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Harry​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Fiction 3D Printing Figurines.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?


This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.13 mm
    Support Top Distance: 0.13 mm
    Support Bottom Distance: 0.13 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus
Other author's 3D printings


  • loading reviews..

Similar items

Browse more newly listed 3D printings