Make pre-order

cm: 10.92 w x 7.91 d x 20 h
in: 4.299 w x 3.114 d x 7.874 h
BUY FOR  $16.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
60.99 MiB n.a.
80.30 MiB n.a.
35.42 MiB 1 h 44 min
1 m
32.16 MiB 1 h 42 min
1 m

Did you miss him? Here he is.

Following the incredible popularity of Ravager Baby Groot 3D model among the 3D printing community comes another version of life-size Hello! Groot 3D Model for 3D printing. Join them together in the Galaxy's most challenging rescue adventures.

The new Hello! Groot 3D model showcases the beloved movie character in sitting position. If you feel down and nothing seems to cheer you up, printing Groot 3D model is the solution you've been looking for. 

This replica of the tree-like organism movie character is created in Autodesk Maya and ZBrush. The files are converted to STL format - a widely 3D printing format supported by most 3D printers. For easy printing, the files are made solid and checked and corrected in Netfabb. 

Groot 3D model is split into 4 parts. This means that you will use less support when printing them. Assembly is easy and straightforward. If you need guidance, there's a detailed video. See the video icon at the far right of the picture slider on the model's page.

After being 3D printed, Groot figurine will stand 20 cm tall, 11 cm wide, and 8 cm deep.

Download Hello! Groot 3D Model STL files by clicking the green Buy button.  Add the files to your shopping cart. Continue to checkout. Provide your PayPal or credit card details to pay securely. As soon as the payment is successfully processed, you will have access to download the files in a .zip folder. Detailed printing instructions are included.

We recommend reading the Printing Details info before starting printing the model.

You can also use our partners' printing services to 3D print Groot 3D Model if you don't own a 3D printer. Choose the files and click the Print with 3DHubs or Print with Treatstock button.

Also, you may like other Marvel 3D Printing Figurines as well as 3D Figurines of DC.

This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings:


Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
Wall Line Width: 0.4 mm
Outer Wall Line Width: 0.4 mm
Inner Wall(s) Line Width: 0.4 mm
Top/Bottom Line Width: 0.4 mm
Infill Line Width: 0.4 mm
Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm


Wall Thickness: 0.8 mm
Wall Line Count: 2
Top/Bottom Thickness: 0.8 mm
Top Thickness: 0.8 mm
Top Layers: 8
Bottom Thickness: 0.8 mm
Bottom Layers: 8
Top/Bottom Pattern: Lines
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
Compensate Outer Wall Overlaps: Check
Compensate Inner Wall Overlaps: Check
Horizontal Expansion: 0 mm
Z Seam Alignment: Shortest


Infill Density: 25%
Infill Line Distance: 3.2 mm
Infill Pattern: Grid
Infill Overlap Percentage: 10%
Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 0
Infill Before Walls: Check


Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Standby Temperature: 175°C
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
Nozzle Switch Retract Speed: 20 mm/s
Nozzle Switch Prime Speed: 20 mm/s


Print Speed: 60 mm/s
Infill Speed: 80 mm/s
Wall Speed: 30 mm/s
Outer Wall Speed: 30 mm/s
Inner Wall Speed: 60 mm/s
Top/Bottom Speed 15 mm/s
Support Speed: 60 mm/s
Support Infill Speed: 60 mm/s
Travel Speed: 120 mm/s
Initial Layer Speed: 15 mm/s
Initial Layer Print Speed: 15 mm/s
Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed 15 mm/s
Maximum Z Speed: 0 mm/s


Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.625 mm


Enable Print Cooling: Check
Fan Speed: 100%
Regular Fan Speed: 100%
Maximum Fan Speed: 100%
Regular/Maximum Fan Speed Threshold: 10 s
Regular Fan Speed at Height: 0.3 mm
Regular Fan Speed at Layer: 2
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s


Enable Support: Check
Support Placement: Everywhere
Support Overhang Angle: 50°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 30 %
Support Line Distance: 1.3333 mm
Support Z Distance: 0.1 mm
Support Top Distance: 0.1 mm
Support Bottom Distance: 0.1 mm
Support X/Y Distance: 0.7 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.2 mm
Support Stair Step Height: 0.3 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65°

Build Plate Adhesion

Build Plate Adhesion Type: Brim
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
Brim Line Count: 20
Brim Only on Outside: Check

Mesh Fixes

Union Overlapping Volumes: Check

Special Modes

Print Sequence: All at Once
Surface Mode: Normal


Extra Skin Wall Count: 0

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


guardians of the galaxy, marvel, comic book, comics, groot, baby groot, avengers

Similar items

Browse more newly listed 3D printings