Premium Stock

X-Men Cyclops 3D Printing Figurine | Assembly

(6)
cm: 20.2 w x 20.7 d x 24.8 h
in: 7.953 w x 8.15 d x 9.764 h

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

X-Men Cyclops 3D Printing Figurine comes in 3 versions for each 3D printer type (FDM/FFF, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_Cyclop_1_SLS (repaired) .stl
50.82 MiB 19 h 56 min 12 m 101 x 104 x 124 Download
2_Cyclop_2_SLS (repaired) .stl
49.41 MiB 18 h 34 min 11 m 101 x 104 x 123 Download
1_Cyclop_1_v2_SLS (repair ed).stl
71.86 MiB 19 h 60 min 12 m 101 x 104 x 124 Download
2_Cyclop_2_v2_SLS (repair ed).stl
68.25 MiB 18 h 33 min 11 m 101 x 104 x 124 Download

HISTORY OF CYCLOPS

Cyclops (a.k.a. Scott Summers) is a mutant superhero and part of the X-Men team. His younger brother named Alex is also a mutant, and their parents died in a plane crash when they were kids. Once, while still in the custody of his adoptive parents, Scott’s abilities first showed themselves. After this, Charles Xavier offered the brothers to become his disciples. Scott agreed without hesitation, but Alex rejected this offer. In Professor Xavier’s team he met Jean Gray, who he immediately fell in love with. His ability to release energy rays from his eyes always frightened him, because he feared he could hurt people. There was a time when he doubted the correctness of Professor X’s judgments, which was the result of his hearing the speech of Magneto who had saved his life and seeing a kiss shared by Jean Gray and Wolverine. Cyclops then joined Magneto’s team, but when the latter tried to destroy the mutants using a robot army, this alliance was broken. Scott Summers never got along with Wolverine and even drove him out of the X-Men team, but subsequently brought him back and offered his help. Along with other mutants, he fights for the well-being of people with superpowers in the world. He also protects the school for mutants, so young mutants could have a chance to use their powers for a good cause.

ABOUT THIS 3D FIGURINE

The model is saved in STL files, a format supported by most 3D printers

FDM version features:
- Contain 16 parts;
- Assembly kit includes locks. One part of  Lock (7_Ge_lock_10H_(x4)) needs to be printed 4 times. One part of  Lock (8_Ge_lock_7S_(x6)) needs to be printed 6 times.;
- Made with 2 variants of the body. With the jacket and without it;
- Made with special platform;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA version features:
- Same as FDM but smaller, also made as 8 parts;

SLS version features:
- Same as SLA but made as 1 part in 2 variants to save your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.4.1Simplify3D or Slic3r Software.

There are 16 parts for FFF/FDM version, 8 parts for DLP/SLA version and 2 parts for SLS.

Scale: Cyclops actual height is 1920 mm. The model’s chosen scale is 1/8 for the FDM version and 1/16 for the DLP/SLA/SLS version.

FFF/FDM version dimensions:
A printed model is 248 mm tall, 202 mm wide, 207 mm deep;

SLA/DLP/​SLS version dimensions:
A printed model is 124 mm tall, 101 mm wide, 104 mm deep;
- Has few details, to keep printing costs down.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Cyclops 3D Figurine for 3D printing which consist of 26 parts;
- 3 versions of files for this model for FFF/FDM, DLP/SLA, and SLS;
- High-poly detailed figurine of Cyclops;
- Detailed settings that we provide for Cura 3.4.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of Cyclops for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Cyclops 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Marvel 3D Printing Figurines.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

Generic

Below you can find printing recommendations for Cura, Bambu Lab, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Bambu Lab printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Bambu Studio 1.9.5. Test models were printed on the Bambu Lab A1, Bambu Lab A1 Mini, Creality Ender 3 S1, Anycubic Kobra 2, and Anycubic Vyper using PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.8.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings