Premium Stock

Link - Legend of Zelda BOTW Bust

cm: 14.1 w x 12.7 d x 16 h
in: 5.551 w x 5 d x 6.299 h

Source Files




Printing Details

STL files and the cutting of this model are preserved as created by the Author. This model was not moderated by Gambody, it is not subject to technical support by Gambody, and we do not offer any guarantees on the 3D printing results.

Stock models can only be purchased in an order separate from the Premium STL files by Gambody. If a Premium model is added to the Cart, the Stock models are deleted automatically, and vice versa.

You can read more about Stock models on Gambody's Blog.

The Author of the Stock model can provide technical support if they wish. All your questions, requests, wishes and remarks can be left in the comment section below.

Gambody Team can consider providing a Premium version of the model if highly requested.

File Name File Size Time / Filament Object Size
(x/y/z mm)
9.55 MiB 9 min <1 m 10 x 12 x 11 Download
9.55 MiB 1 min <1 m 6 x 9 x 2 Download

Bust of the iconic character from Legend of Zelda - Breath of the Wild -

Big size, easy to print: very few supports needed at slicing time

The model has been sculpted according to Amiibo reference, with accuracy and printability in mind: collectors will recognize the features even in monochrome

Also included a Master Sword to be print separately and glued to the back


Test printed on Zortrax M200, (Zhips material, Normal quality, 0.19 layer height, low infill, 20% support angle)

Most supports are generated near the tip of hairlocks, varying angle has been optimized during design stage to minimize bridges and overhangs


comments powered by Disqus

Similar items

Browse more newly listed 3D printings