Make pre-order

Legion 3D Printing Figurine | Assembly

average
cm: 12 w x 12.7 d x 28 h
in: 4.724 w x 5 d x 11.024 h
34
BUY FOR  $24.99

Source Files

|

Description

|

Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Legion 3D Printing Figurine comes in 5 versions for each 3D printer type (FFF/FDM, DLP/SLA and SLS). Files for each version are available for download after the purchase.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_hood_FDM(repaired).stl
36.50 MiB 3 h 52 min
2 m
58 x 55 x 46 Download
2_head_FDM(repaired).stl
29.64 MiB 1 h 28 min
1 m
25 x 34 x 40 Download
3_body_FDM(repaired).stl
54.39 MiB 16 h 50 min
9 m
Download
4_legs_FDM(repaired).stl
51.98 MiB 13 h 11 min
7 m
Download
5_arm_R_1_FDM(repaired).s tl
38.11 MiB 1 h 27 min
1 m
45 x 30 x 23 Download
6_arm_R_2_FDM(repaired).s tl
30.81 MiB 49 min
<1 m
17 x 18 x 41 Download
7_hand_R_with_gun_FDM(rep aired).stl
40.70 MiB 3 h
2 m
18 x 29 x 97 Download
8_gun_FDM(repaired).stl
25.36 MiB 1 h 1 min
1 m
57 x 11 x 14 Download
9_arm_L_FDM(repaired).stl
34.44 MiB 3 h 40 min
2 m
36 x 56 x 70 Download
10_hand_L_FDM(repaired).s tl
13.99 MiB 35 min
<1 m
18 x 15 x 39 Download
11_foot_R_FDM(repaired).s tl
34.36 MiB 3 h 21 min
2 m
29 x 46 x 76 Download
12_foot_L_FDM(repaired).s tl
36.46 MiB 3 h 36 min
2 m
38 x 44 x 82 Download
13_armor_FDM(repaired).st l
26.11 MiB 1 h 54 min
1 m
47 x 27 x 20 Download
14_blade_FDM(repaired).st l
14.21 MiB 49 min
<1 m
4 x 21 x 63 Download
15_hose_1_FDM(repaired).s tl
14.17 MiB 16 min
<1 m
7 x 33 x 11 Download
16_hose_2_FDM(repaired).s tl
11.35 MiB 13 min
<1 m
6 x 26 x 12 Download
17_hose_3_FDM(repaired).s tl
11.65 MiB 13 min
<1 m
6 x 28 x 12 Download
18_hose_4_FDM(repaired).s tl
10.01 MiB 13 min
<1 m
4 x 26 x 15 Download
19_hose_5_FDM(repaired).s tl
9.40 MiB 11 min
<1 m
4 x 25 x 13 Download
20_hose_6_FDM(repaired).s tl
10.13 MiB 32 min
<1 m
23 x 42 x 15 Download
21_hose_7_FDM(repaired).s tl
8.24 MiB 21 min
<1 m
18 x 49 x 12 Download
22_hose_8_FDM(repaired).s tl
5.51 MiB 11 min
<1 m
17 x 47 x 5 Download
23_hose_9_FDM(repaired).s tl
5.94 MiB 16 min
<1 m
25 x 8 x 15 Download
24_hose_10_FDM(repaired). stl
6.02 MiB 15 min
<1 m
8 x 21 x 14 Download
25_platform_FDM(repaired) .stl
24.65 MiB 11 h 6 min
6 m
119 x 119 x 20 Download
26_ge_lock_7S(x1)_FDM(rep aired).stl
0.02 MiB 3 min
<1 m
7 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min
<1 m
30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 16 min
1 m
150 x 18 x 5 Download

ABOUT THIS 3D FIGURINE

"Does this unit have a soul?"

Geth Platform 2A93 “Legion” is an advanced mobile platform formed from the gestalt consciousness of 1,183 networked AIs known as Geth. While all representatives of the Geth race are sapient machines, housing more than a thousand Geth programs Legion posses unique intelligence and even demonstrates an emotional attachment to the player character Commander Shepard. Inspired by the iconic video game character, the author of the Legion figurine for 3D printing took up the project that would rejoice any Mass Effect enthusiast. Bipedal Geth Infiltrator is carefully depicted with its Quarian-like head shape, hands, legs, and its trademark "flashlight head". The 3D printing Legion has three thick fingers on both hands, and three toes on each foot. The suit of the "mobile platform" is pierced with various tubes all over its surface and the holes on the battle-damaged armour reveal intricate mechanical parts. The Geth model for 3D printing carries an antenna-like attachment on its left shoulder that is known to be peculiar to the large bipedal units only. In its right hand, Legion holds the Geth Pulse Rifle as if readily awaiting the impending enemy. We want to draw your attention to the diversity of textures that are distinctively depicted all over the Legion suit’s surface. The muscle tissue and the outer shell of the Geth Platform are adorned with various pins, stitches, splinters, and scars that do not cease impress the closer you inspect the figurine’s details. The uniqueness of the character’s appearance in combination with the spectacular level of the figurine’s execution will result in an amazing 3D printing project that you will surely not want to put off!

ADAPTATION FOR 3D PRINTING (FFF/FDM 1.0, DLP/SLA 1.0, DLP/SLA Eco 1.0, SLS 2.0)

Legion figurine for 3D printing is a static assembly model and its updating and adaptation for different types of 3D printers took Gambody team 50 hours in total. Due to the fact that this figurine was first released on Gambody in 2016 as a one-piece model only, in order for all the Mass Effect fans to print the cleanest figurine possible the model was cut into assembly parts and adapted for different types of 3D printers taking into account the present-day technology advancements. Legion’s anatomy and body proportions were thoroughly reviewed during the moderation process for the figurine to be depicted harmoniously in the intended pose. For the Geth figurine to excel in the level of detail, our team made sure to enhance the textures all over the model’s damaged suit and worked on the detail of the figurine’s armour, weapon, accessories, etc. The model’s cutting was chosen by our team to minimize the amount of filament needed for generated support and some of the parts were hollowed out for you in the model’s Eco version to save resin. In order to ensure the smooth 3D printed result, Legion’s large Geth Pulse Rifle, various tubes all over its body, the "flashlight head”, hands, the antenna-like attachment on its left shoulder, and some armour elements are now provided as separate STL files as well. All the assembly parts are provided in STL files in recommended positions that were worked out so to ensure the smoothness of the details’ surfaces after printing and that the 3D printing beginners won't face difficulties when placing the parts on a build plate. When downloading any figurine's file you will also receive "Assembly Manual" for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format. 

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the Legion's actual height that is 1980 mm. The 3D printing figurine's chosen scale is 1/8 for the FFF/FDM version and 1/16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.0 version features:
- Contains 26 parts;
- A printed model is 280 mm tall, 120 mm wide, 127 mm deep;
- The figurine is significantly improved in accordance with anatomy and body proportions rules;
- Introduced new cutting and enhanced level of detail;
- The assembly kit includes lock 26_ge_lock_7S(x1) to attach the model's legs to the body securely without glue that needs to be printed once;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:
- Contains 11 parts;
- A printed model is 140 mm tall, 60 mm wide, 64 mm deep;
- All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:
- Contains 11 parts;
- A printed model is 140 mm tall, 60 mm wide, 64 mm deep;
- Contains some hollowed out parts to save resin.

SLS 2.0 version features:
- Made as a solid one-piece figurine;
- A printed model is 140 mm tall, 60 mm wide, 64 mm deep;
- The figurine is significantly improved in accordance with anatomy and body proportions rules;
- Introduced new cutting and enhanced level of detail;
- Contains 3 parts - a solid Legion model and the figurine with the platform separated.

SLS 1.0 version features:
- Contains 1 part;
- A printed model is 160 mm tall, 74 mm wide, 75 mm deep;
- The scale of the figurine is indeterminate;
- It is the initial version of the model released in 2016.

WHAT WILL YOU GET AFTER PURCHASE?

- STL files of Legion 3D Figurine for 3D printing which consist of 51 parts;
- 5 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Legion;
Assembly Manual for FFF/FDM 1.0 and DLP/SLA 1.0 versions in PDF format;
- Detailed settings that we provide as a recommendation for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get the figurine of Legion for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Legion​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like Female Shepard 3D Printing Figurine.

_______
FAQ: 

Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Quality
Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Shell 
Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill 
Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Material 
Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Speed 
Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Travel 
Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Cooling 
Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Support 
Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.2 mm
Support Z Distance: 0.13 mm
    Support Top Distance: 0.13 mm
    Support Bottom Distance: 0.13 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Experimental
Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Extruder
Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Layer
Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Additions
Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Infill
Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Support
Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Temperature
Extruder 1 Temperature: 210
Heated Bed: 60

Cooling
Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Speeds
Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Other
Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
Quality
  Detect thin walls: Check
  Detect bridging perimeters: Check
Advanced
  Seam position: Random
Infill
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
Advanced
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
Skirt
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
Brim 
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
Raft
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
Modifiers
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
Autospeed
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
Overlap
  Infill/Perimeters overlap: 20%
Flow
  Bridge flow ratio: 0.95
Other
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings