Make pre-order

Soldier: 76 3D Model STL Files | Static Figure

cm: 11.103 w x 6.546 d x 15.99 h
in: 4.371 w x 2.577 d x 6.295 h
BUY FOR  $16.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
OW_gun (repaired) (repair ed).stl
16.78 MiB 2 h 46 min
1 m
OW_soldier 76 (repaired) (repaired).stl
18.32 MiB 21 h
14 m

The Soldier: 76 3D model, inspired by the archetypal video game character, is the warrior fighting to expose the truth behind the Overwatch’s collapse. 

Although his true identity remains unknown, it is thought that Soldier: 76 is behind the attacks against institutions and corporations that brought Overwatch organization down. 

Armed with cutting-edge weaponry, Soldier: 76 has the speed and skill of a trained warrior. The weapons that make him invincible, the heavy pulse rifle and the helix rockets, cause increased damage to the enemy deployed on a small radius. The soldier possesses fighting capabilities exceeding those of the conventional soldier.

The Soldier: 76 3D model showcases all the video game character’s power thanks to the fine and intricate details. The 3D model is sculpted in Autodesk Maya 3D modeling program and it is saved in STL files for an effortless 3D printing. There are two separate parts: one for the figurine and the other for the heavy pulse rifle. The STL files are checked and corrected in Netfabb and can be easily handled in CURA 15.06 and Simplify3D.

Printing time: 01d 00h

Printing material: 15.4m

The 3D model is depicted holding his heavy pulse rifle pointed down. It is provided with a support base, to facilitate its display on the shelf or the desktop. The 3D model can be used as a piece for table-top games, or as a special occasion gift.

After 3D printing, the Soldier: 76 3D model will stand 111mm wide, 159mm tall, and 65mm deep. 

Buy Soldier: 76 3D model STL files by clicking on the green Buy button on the 3D model’s page. Proceed to checkout and insert your PayPal or credit card details. After this, download the STL files and printing recommendations for an accurate 3D printing process.

You can also use our partner’s platform to print the STL files. Just click the Print with 3D hubs button after you have purchased the 3D model’s STL files. 


On 28.11.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 28.11.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


Overwatch, Soldier 76, Hero, Game Model, Static, Blizzard, iconic, game

Similar items

Browse more newly listed 3D printings