Make pre-order

(15)
small
cm: 8.423 w x 9.8 d x 9.201 h
in: 3.316 w x 3.858 d x 3.622 h
10
BUY FOR  $14.99

Source Files

|

Description

|

Printing Details

This 3d model consists of a file in StereoLithography (.Stl) format that has been optimized for 3d printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
tao.stl
59.31 MiB 25 h 10 min
16 m
Download

This towering battlesuit from the hugely popular video game is known for its ability to fight off any enemy infantry. It is heavily armored and equipped with weapon and support systems that allow it to fight more effectively. Although huge in size, its movements are not stiff, being capable of quick reaction and easy maneuverability. 

TAU XV109 Y'Vahra is a battlesuit worn by a single warrior. Its two arms display two powerful weapons, firing at the speed that defeats any enemy combatants and other machinery. This type of machinery is extremely useful in ensuring support in case of enemy assaults. 

Our TAU XV109 Y'Vahra 3D print design 8.423cm wide, 9.8cm deep and 9.201cm tall. It comes on a nicely crafted watermarked support, which will enable you to place it on your shelf or desktop. The files have undergone testing, so you can enjoy error-free printing. They are all provided in .STL format, supported by 3D printers. You can print the model either on SLA/SLS or FFF printers.

To buy the TAU XV109 Y'Vahra 3D printable files click on the “Buy” button and proceed to checkout. Once the payment has been processed, you will be able to download the files.

* Check also these awesome Chaplain 3D print model and Valkyrie Vendetta 3D design before surfing further on this website.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed: 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: Check
  • Pattern: Lines
  • Line distance: 1.5mm

Platform Adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings