Make pre-order

cm: 17.22 w x 17.22 d x 37.13 h
in: 6.78 w x 6.78 d x 14.618 h
BUY FOR  $29.99

Source Files




Printing Details

This 3d model consists of files in StereoLithography (.Stl) format that have been optimized for 3d printing.

Download part staff2 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
body (repaired).stl
37.35 MiB 103 h 20 min
63 m
gun (repaired).stl
5.16 MiB 8 h 1 min
5 m
legs (repaired).stl
17.59 MiB 68 h 58 min
36 m
staff1 (repaired).stl
1.58 MiB 1 h 25 min
1 m
staff2 (repaired).stl
21.19 MiB 23 h 10 min
13 m

Chaplain 3D print model from the renowned wargame descended from the battlefield right on our 3D marketplace to the joy of the gamers. This war leader fights alongside his fellow brethren, alleviating fear and installing faith in them. His appearance is terrifying to his enemies. 

He wears dark armor suits and skull helmets. His armor suit is adorned with symbols that identify with his ancient history. Known to lead from the front, the Chaplain is feared for his destructive power of the enemy, instigating his fellow brothers through action and words.

The assembled Chaplain 3D model is 172.2mm wide, 172.2mm deep and 371.3mm tall and it consists of 5 regular HD parts. Due to high detail fidelity of this model, we recommend using HD printers (SLS/SLA) to get the best results. Files have been tested and are error-free so you can enjoy smooth printing and outstanding result. 

To buy Chaplain 3D printable files press the green “Buy” button, proceed to checkout and insert your PayPal account or credit card details. Once through, you will be able to print your own Chaplain.

Check out also Valkyrie Vendetta 3D design or Y'Vahra 3D Model from the same video game series.

Credits: This model is an inspiration taken from the pictures of Pavel Zolot'ko's works. Designed for 3D printing. 

Version 1.01

We’ve optimized Chaplain's files as follows:

  1. Upper part - Body (repaired).stl from 95.67MB to 42.64MB
  2. Lower part - Legs (repaired).stl from 19.35MB tо 19.21MB
  3. Gun - Gun (repaired).stl from 10MB tо 6.11MB

Staff has been optimized from 3 parts

  • Staff_1 (repaired).stl - 43.78MB
  • Staff_2 (repaired).stl - 1.32MB
  • Staff_3 (repaired).stl - 1.7MB

to 2 parts

  • Staff1 (repaired).stl - 1.5MB
  • Staff2 (repaired).stl - 18.24MB

All these changes have been done to reduce files size, speed up printing time and reduce filament consumption.

*Please note that this optimization does not affect model’s detailing. Enjoy printing!


On 28.11.2016 the model files have been optimized and made solid. They now are adapted to be 3D printed using any slicing program. 3D model files are already available for purchase and download. 

This model was tested in Cura 15.06 Beta. To avoid printing problems, we recommend the following settings:

  • Layer height: 0.1mm
  • Initial layer thickness: 0.3mm
  • Wall line count: 2
  • Infill line width: 0.3mm
  • Support line width: 0.3mm
  • Top layers: 3
  • Bottom layers: 3
  • Bottom/Top pattern: Lines
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

Check this **Simplify3D User Guidelines to avoid any 3D printing problems with this software.
**On 28.11.2016, the 3D model files have been optimized. You can print them without following these Simplify3D guidelines, as the model is solid.

The model was tested in PLA.


  • Printing temp: 190°
  • Bed temp: 65°
  • Diameter: 2.85mm
  • Flow: 100%
  • Enable retraction: Check
  • Retraction retract speed: 30mm/s
  • Retraction prime speed: 30mm/s
  • Retraction distance: 3mm
  • Retraction minimum travel: 2.5mm
  • Enable combing: Check
  • Minimal extrusion retraction: 0.02mm
  • Z Hop when retracting: 0mm

Speed setup:

  • Infill speed: 50mm/s
  • Outer shell speed: 20mm/s
  • Inner shell speed: 20mm/s
  • Top/Bottom speed: 20mm/s
  • Support speed: 30mm/s
  • Travel speed:150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 2mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 15°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: Check
  • Pattern: Lines
  • Line distance: 1mm

Platform Adhesion:

  • Type: Brim
  • Brim line count: 12

Other recommendations:

All basic settings by default

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printers. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures


comments powered by Disqus

Similar items

Browse more newly listed 3D printings