Make pre-order

cm: 10.206 w x 10.345 d x 16.006 h
in: 4.018 w x 4.073 d x 6.302 h
BUY FOR  $9.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.STL) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
Isaac_Clarke (repaired).s tl
47.85 MiB 29 h 22 min
20 m
plasma_cutter (repaired). stl
15.21 MiB 51 min
<1 m

Isaac Clarke 3D model, the main protagonist of the video game franchise, can now be replicated with the help of 3D printing. 

The shooter video game shows the main character, a ship systems engineer, show his struggling overcoming dementia and taunting hallucination he inherited while being stranded on a space ship for a long period of time. 

He follows in his father’s steps and obtains his education in electrical and mechanical engineering. He later is offered to attend a renowned engineering academy, which due to some family issues and shortage of money he cannot afford.

Isaac Clarke 3D model truly replicates the in-game character. The figurine is modeled in Autodesk Maya and converted into STL file format. The files are checked and corrected in Netfabb to ensure a seamless 3D printing experience.

The video game 3D model print parts are made solid, to facilitate their handling in the 3D printing software and slicing program. 

Fine and intricate details adorn the 3D model’s outer shell. The replica is shown in an attacking position, holding the plasma cutter.

There are 2 separate STL files to 3D print: one for the figurine and the other for the plasma cutter. The files are adapted to be printed on any type of 3D printer. 

After being 3D printed, Isaac Clarke 3D model will stand 102 mm wide, 160 mm tall, and 103 mm deep. The figurine comes on a support base, to facilitate its display on the shelf or desk.

Add Isaac Clarke 3D model STL files in the shopping cart by clicking on the green Buy button in the top-right corner of the model’s page. Continue to checkout. Provide your PayPal or credit card details and download the files in a .zip folder. 3D print them on your home 3D printer.

Or, use the 3D printing services of our partners, 3DHubs and Treatstock and print with them any file you available on our marketplace.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


Dead Space, Isaac Clarke, Hero, Game model, Static, Halloween

Similar items

Browse more newly listed 3D printings