Make pre-order

cm: 25.2 w x 36.4 d x 30.1 h
in: 9.921 w x 14.331 d x 11.85 h
BUY FOR  $19.99

Source Files




Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
hydralisk_head_1 (repaire d).stl
7.18 MiB 18 h 2 min
15 m
hydralisk_head_2 (repaire d).stl
27.09 MiB 4 h 48 min
3 m
hydralisk_head_3 (repaire d).stl
4.12 MiB 18 h 28 min
12 m
hydralisk_L_ARM (repaired ).stl
8.59 MiB 13 h 7 min
10 m
hydralisk_lower_body (rep aired).stl
60.23 MiB n.a.
hydralisk_R_ARM (repaired ).stl
4.14 MiB 8 h 57 min
6 m
hydralisk_tail_1 (repaire d).stl
51.69 MiB 32 h 18 min
19 m
hydralisk_tail_2 (repaire d).stl
53.00 MiB 33 h 48 min
23 m
hydralisk_tail_3 (repaire d).stl
58.10 MiB 46 h 13 min
37 m
hydralisk_upper_body (rep aired).stl
19.42 MiB 27 h 4 min
18 m

Hydralisk 3D model is inspired by the video game Lair-tech unit. The in-game unit produces high damage due to its fast attacks. 

The 3D model is broken down into 10 separate parts, to facilitate its printing. Assembly is easy and doesn't require glue. It is a high-poly model standing 30 cm tall after printing.

The Hydralisk 3D model is available for purchase in STL file format. All files have passed thorough checking and correction in Netfabb and are error-free. The model is solid, which means that you will have no problem 3D printing it on your home 3D printer.

The files are easily handled in any slicing program. We recommend reading the Printing Details section before starting 3D printing the model.

Use Hydralisk 3D model as a table top piece or as a display 3D model.

Buy Hydralisk 3D model STL files by clicking the Buy button in the top-right corner of the model’s page. Continue to checkout. Provide your PayPal or credit card details and download the files in an archived folder.

If you don’t have a 3D printer of your own, you can use the services of our partners, 3DHubs and Treatstock directly from our website. Just choose the files you want to 3D print and click the Print with 3DHubs or Print with Treastock button. Choose the 3D printing service provider that is in your city of residence and the material you want the model to be printed in and wait for your 3D printed model to be shipped to your home address.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:


  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 30mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4


  • Infill pattern: Grid
  • Line distance: 1.5mm
  • Infill overlap: 20%
  • Infill layers: 0


  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.


comments powered by Disqus
Other author's 3D printings


Blizzard, Starcraft, Hydralisk, Zerg, Assembly, Game Model, Halloween

Similar items

Browse more newly listed 3D printings