Scylla 3D Model for Printing | Static

(1)
cm: 27.44 w x 28.37 d x 15 h
in: 10.803 w x 11.169 d x 5.906 h

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Download part head1 for free to check the printability and test the quality before buying all STL files of the 3D model.

Download Free Samples

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
head1 (repaired).stl
7.83 MiB 13 h 46 min 11 m 68 x 97 x 113 Download
head2 (repaired).stl
7.20 MiB 12 h 6 min 9 m 75 x 81 x 102 Download
head4 (repaired).stl
8.57 MiB 8 h 52 min 6 m 64 x 86 x 88 Download
scyllaMAIN (repaired).stl
54.56 MiB 34 h 41 min 19 m 140 x 154 x 150 Download
head3 (repaired).stl
8.29 MiB 9 h 18 min 7 m 78 x 57 x 101 Download

Scylla 3D model is inspired by this video game playable God. Now, this video game character can be replicated with the help of 3D printing.

The video game character impersonates the Horror of the Sea. Many who have wandered in her waters retell horror stories of black tentacles destroying whole ships. Her horrible laughter makes the blood freeze in the veins of those who happen to cross her path or have an encounter with her. Her child-like laughter is disturbing, dragging men into the dark abyss.

Scylla 3D model is created in Autodesk Maya modeling program and converted into STL file format. This file format is the most widely used format for 3D printing. The file has undergone thorough checking and correction in Netfabb and can be easily handled in any slicing program. 

The video game 3D printing model consists of 5 parts. Support is used to print the overhangs. 

Scylla 3D model features intricate outer shell details and fine lines, in synch with the video game prototype. The figurine is mounted on a support base and you will easily be able to display it on the shelf or desk.

After having been 3D printed, the 3D model will stand 274 mm wide, 150 mm tall, and 283 mm deep.

Buy Scylla 3D model STL files by clicking the green Buy button on top of the model’s page. Add the file to your shopping card and proceed to checkout. Provide your PayPal or credit card details and download the file.

You can also use our partners’ platforms to print the file directly from our website. Choose Print with 3DHubs or Print with Treatstock, choose the 3D printing service provider and wait for your printed 3D model to be shipped to your home address.

Check other Gods made ready for 3D printing: Poseidon, Apollo, and Thor.
 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
avatar of Koddy
From the same author:

Reviews

  • loading reviews..

Similar items

Browse more newly listed 3D printings