Make pre-order

(4)
small
cm: 16.34 w x 16.266 d x 12 h
in: 6.433 w x 6.404 d x 4.724 h
5
BUY FOR  $14.99

Source Files

|

Description

|

Printing Details

This 3D model consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
Kindred (repaired).stl
44.38 MiB 73 h 8 min
45 m
Download

Kindred 3D model is inspired by the dual video game character. It consists of two characters: the lamb, which is the primary character that performs basic attacks, and the wolf – the secondary character that is commanded through abilities.

The Kindred character is created for 3D printing for all those who enjoy interacting with the in-game character. Thanks to its interesting design, this 3D model will occupy a significant place and will take a leading role in your board games.

The Kindred 3D model STL files are created in Autodesk Maya 3D modeling software. It is a high-poly model. The increased number of polygons means the printed model will be a lifelike replica of the in-game character.

The 3D video game figurine STL files are optimized to be handled in any slicing program, such as CURA 15.06 and Simplify3D. 

Attention: Those who use Simplify3D software, please read these GUIDELINES which will help you to configure it correctly.

The Kindred 3D model files for printing can be printed on all types of 3D printers, such as SLA/SLS or FFF.

The model consists of a single STL file, weighing 48.5MB. 

After having it printed, Kindred 3D model will stand 163mm wide, 162mm deep, and 120mm tall. It is provided with a support base to ensure its display on the desk or a shelf.

Download Kindred 3D model STL files by clicking the top right green BUY button. Proceed to checkout, provide your PayPal account or credit card details and enjoy an accurately designed Kindred 3D model STL file.

Note: You can also print the model with 3DHubs, directly for our website. Check the files you want to print and click Print with 3DHUBS button to get redirected to 3DHubs website, where you can choose from thousands of 3D printing service providers worldwide.
    
 

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Grid
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
Other author's 3D printings

Tags

lol, champion, wolf, lamb, game models, static models, league of legends, kindred, Helloween, Halloween

Similar items

Browse more newly listed 3D printings