Make pre-order

Terminator T-1000 Damaged for Diorama 3D Printing Figurine | Assembly

cm: 35.1 w x 55.9 d x 23.4 h
in: 13.819 w x 22.008 d x 9.213 h
BUY FOR  $19.99

Source Files




Printing Details

This 3D Figurine consists of files in StereoLithography (.Stl) format that have been optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

Terminator T-1000 Damaged 3D Printing Figurine comes in 4 versions for each 3D printer type (FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS). Files for each version are available for download after the purchase.

Detailed information about this model is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
11_Ge_lock_10H_(x46) (rep aired).stl
0.03 MiB 4 min
<1 m
10 x 18 x 2 Download
12_Ge_lock_7S_(x2) (repai red).stl
0.02 MiB 3 min
<1 m
7 x 18 x 2 Download
13_Head_FDM (repaired).st l
10.05 MiB 3 h 36 min
2 m
52 x 49 x 47 Download
14_Body_FDM (repaired).st l
18.01 MiB 8 h 31 min
5 m
65 x 48 x 74 Download
15_Arm_R_FDM (repaired).s tl
6.74 MiB 1 h 25 min
1 m
21 x 53 x 33 Download
16_Hook_R_FDM (repaired). stl
4.37 MiB 1 h 20 min
1 m
16 x 18 x 79 Download
17_Arm_L_FDM (repaired).s tl
7.83 MiB 1 h 25 min
1 m
28 x 36 x 44 Download
18_Hook_L_FDM (repaired). stl
4.76 MiB 1 h 20 min
1 m
17 x 17 x 77 Download
19_Legs_FDM (repaired).st l
27.11 MiB 10 h 14 min
6 m
73 x 77 x 131 Download
20_Foot_R_FDM (repaired). stl
10.76 MiB 49 min
<1 m
27 x 37 x 25 Download
21_Foot_L_FDM (repaired). stl
11.64 MiB 46 min
<1 m
17 x 41 x 23 Download
22_Bag_1_FDM (repaired).s tl
11.69 MiB 20 min
<1 m
11 x 13 x 20 Download
23_Bag_2_FDM (repaired).s tl
7.37 MiB 19 min
<1 m
17 x 9 x 18 Download
24_Bullet_1_FDM (repaired ).stl
2.35 MiB 8 min
<1 m
14 x 14 x 6 Download
25_Bullet_2_FDM (repaired ).stl
3.34 MiB 13 min
<1 m
17 x 17 x 6 Download
26_Bullet_3_FDM (repaired ).stl
3.29 MiB 12 min
<1 m
17 x 16 x 6 Download
1_Platform_1_FDM (repaire d).stl
1.25 MiB 38 h 24 min
23 m
149 x 139 x 47 Download
2_Platform_2_FDM (repaire d).stl
35.00 MiB 54 h 50 min
34 m
149 x 139 x 147 Download
3_Platform_3_FDM (repaire d).stl
26.42 MiB 51 h 27 min
32 m
149 x 122 x 147 Download
4_Platform_4_FDM (repaire d).stl
7.92 MiB 34 h 19 min
21 m
149 x 122 x 47 Download
5_Platform_5_FDM (repaire d).stl
4.67 MiB 31 h 20 min
19 m
114 x 149 x 47 Download
6_Platform_6_FDM (repaire d).stl
9.40 MiB 29 h 7 min
17 m
103 x 149 x 35 Download
7_Platform_7_FDM (repaire d).stl
12.46 MiB 70 h 54 min
44 m
133 x 149 x 147 Download
8_Platform_8_FDM (repaire d).stl
11.52 MiB 69 h 56 min
43 m
133 x 150 x 147 Download
9_Platform_9_FDM (repaire d).stl
12.66 MiB 29 h 13 min
17 m
103 x 150 x 37 Download
10_Platform_10_FDM (repai red).stl
6.23 MiB 31 h 29 min
19 m
114 x 150 x 42 Download


It’s been 10 years since the Terminator from the future tried to kill Sarah Connor. She has now a son, John Connor, who is to lead the Resistance forces to defeat the robots from the future. A group of engineers in Cyberdyne Systems is already working on a revolutionary processor using the remains of the T-800 Terminator on the basis of which SkyNET will be created. At the same time, T-1000 appears in Los Angeles, taking the form of a policeman who was killed immediately after the robot’s arrival. In order to stop him, John Connor sends a reprogrammed T-800 to protect himself in the past. T-800 has barely managed to find the younger John from the past when T-1000 arrives and a shoot-out begins. Being sent to assassinate John, T-1000 leads a continuous pursuit of the protagonists and any means to defeat them is yet to be found. Eventually, in order to kill the T-1000, T-800 throws him in a vat of molten steel together with all evidence of Cyberdyne’s research and destroys himself to hide all traces of future technologies.


This figure is the second alternative part of diorama "T-800 vs T-1000". The model is saved in STL files, a format supported by most 3D printers

FDM version features:
- Contain 26 parts
- Assembly kit includes locks. One part of  Lock (11_Ge_lock_10H_(x46)) needs to be printed 46 times; One part of  Lock (12_Ge_lock_7S_(x2)) needs to be printed twice;
- Made with with bullet marks that can be removed;
- Made with a special platform styled as a movie scene;
- All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA version features:
- Same as FDM but smaller, also made as 10 parts;

DLP/SLA Eco version features:
- Same as the DLP/SLA version, but contains parts hollowed out to save resin;

SLS version features:
- Same as SLA but made as 5 parts to save your material;

All STL files for 3D printing have been checked in Netfabb and no errors were shown.

Note: Before starting 3D printing the model, read the Printing Details for CURA 3.5.1Simplify3D or Slic3r Software.

There are 26 parts for FFF/FDM version, 10 parts for DLP/SLA, 10 parts for DLP/SLA Eco versions, 5 parts for SLS.

Scale: Terminator T-1000 actual height is 1900 mm. The model’s chosen scale is 1/8 for the FDM version and 1/16 for the DLP/SLA/SLS version.

FFF/FDM version dimensions:
A printed model is 234 mm tall, 90 mm wide, 128 mm deep - Terminator
147 mm tall, 351 mm wide, 559 mm deep - Platform

DLP/SLA/​SLS version dimensions:
A printed model is 117 mm tall, 45 mm wide, 64 mm deep - Terminator
74 mm tall, 178 mm wide, 280 mm deep - Platform
- Has few details, to keep printing costs down.


- STL files of Terminator T-1000 Damaged 3D Figurine in Diorama for 3D printing which consist of 51 parts;
- 4 versions of files for this model for FFF/FDM, DLP/SLA, DLP/SLA Eco and SLS;
- High-poly detailed figurine of Terminator T-1000 Damaged;
- Detailed settings that we provide for Cura 3.5.1, Simplify3D and Slic3r for the best print;
- Full technical support from the Gambody Support Team.

You can get Model of Terminator T-1000 Damaged for 3D Printing right now! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Terminator T-1000 Damaged​ 3D Printing Figurine at Gambody YouTube channel.

Also, you may like other Villains 3D Printing Figurines, as well as 3D Figurine of Terminator T-800 for Diorama.


Where can I print a model if I have no printer?
How to get started with 3D printing?
How to set up my 3D printer?
How to choose right 3D model print bed positioning? 
How to paint printed figurine?

This model was tested in Cura 3.5.1 and printed on an Ultimaker 2 in PLA material. Below you can find printing recommendations for CuraSimplify3D and Slic3r softwares.

Cura printing recommendations:

Recommendations: For all parts of Locks you need to change "Brim" type to "Skirt" in Build Plate Adhesion section.

To avoid printing problems, we recommend the following settings:

Layer Height: 0.1 mm
Initial Layer Height: 0.3 mm
Line Width: 0.4 mm
 Wall Line Width: 0.4 mm
   Outer Wall Line Width: 0.4 mm
   Inner Wall(s) Line Width: 0.4 mm
 Top/Bottom Line Width: 0.4 mm
 Infill Line Width: 0.4 mm
 Skirt/Brim Line Width: 0.4 mm
Support Line Width: 0.4 mm
 Initial Layer Line Width: 100%

Wall Thickness: 0.8 mm
    Wall Line Count: 2
Outer Wall Wipe Distance: 0.2 mm
Top Surface Skin Layers: 0
Top/Bottom Thickness: 0.8 mm
   Top Thickness: 0.8 mm 
      Top Layers: 8
    Bottom Thickness: 0.8 mm
      Bottom Layers: 8
Top/Bottom Pattern: Lines
Bottom Pattern Initial Layer: Lines
Top/Bottom Line Directions: [ ]
Outer Wall Inset: 0 mm
Compensate Wall Overlaps: Check
    Compensate Outer Wall Overlaps: Check
    Compensate Inner Wall Overlaps: Check
Fill Gaps Between Walls: Everywhere
Filter Out Tiny Gaps: Check
Horizontal Expansion: 0 mm
Initial Layer Horizontal Expansion: 0 mm
Z Seam Alignment: Sharpest Corner
Seam Corner Preference: Hide Seam
Ignore Small Z Gaps: Check
Extra Skin Wall Count: 1

Infill Density: 20%
Infill Line Distance: 4.0 mm
Infill Pattern: Grid
Infill Line Directions: [ ]
Infill X Offset: 0 mm
Infill Y Offset: 0 mm
Infill Overlap Percentage: 10%
    Infill Overlap: 0.04 mm
Skin Overlap Percentage: 5%
    Skin Overlap: 0.02 mm
Infill Wipe Distance: 0.1 mm
Infill Layer Thickness: 0.1 mm
Gradual Infill Steps: 1
Gradual Infill Steps Height: 1.5 mm
Infill Before Walls: Check
Minimum Infill Area: 0 mm2
Skin Removal Width: 0.8 mm
    Top Skin Removal Width: 0.8 mm
    Bottom Skin Removal Width: 0.8 mm
Skin Expand Distance: 0.8
    Top Skin Expand Distance: 0.8
    Bottom Skin Expand Distance: 0.8
Maximum Skin Angle for Expansion: 90˚
    Minimum Skin Width for Expansion: 0.0

Initial Layer Flow: 100%
Enable Retraction: Check
Retraction Extra Prime Amount: 0 mm3 
Retraction Minimum Travel: 0.8 mm
Maximum Retraction Count: 90
Minimum Extrusion Distance Window: 6.5 mm
Nozzle Switch Retraction Distance: 16 mm
Nozzle Switch Retraction Speed: 20 mm/s
    Nozzle Switch Retract Speed: 20 mm/s
    Nozzle Switch Prime Speed: 20 mm/s 

Print Speed: 45 mm/s
    Infill Speed: 45 mm/s
    Wall Speed: 22.5 mm/s
      Outer Wall Speed: 22.5 mm/s
      Inner Wall Speed: 45 mm/s
    Top/Bottom Speed: 15 mm/s
    Support Speed: 45 mm/s 
     Support Infill Speed: 45 mm/s
Travel Speed: 45 mm/s
Initial Layer Speed: 22.5 mm/s
  Initial Layer Print Speed: 22.5 mm/s
  Initial Layer Travel Speed: 30 mm/s
Skirt/Brim Speed: 45 mm/s
Maximum Z Speed: 0 mm/s
Number of Slower Layers: 2

Combing Mode: All
Avoid Printed Parts when Traveling: Check
Travel Avoid Distance: 0.6562 mm
Layer Start X: 0.0 mm
Layer Start Y: 0.0 mm

Enable Print Cooling: Check
Fan Speed: 100%
    Regular Fan Speed: 100%
    Maximum Fan Speed: 100% 
Regular/Maximum Fan Speed Threshold: 10 s
Initial Fan Speed: 0%
Regular Fan Speed at Height: 0.3 mm
    Regular Fan Speed at Layer: 2 
Minimum Layer Time: 5 s
Minimum Speed: 10 mm/s

Generate Support: Check
Support Placement: Everywhere
Support Overhang Angle: 60°
Support Pattern: Zig Zag
Connect Support ZigZags: Check
Support Density: 15 %
    Support Line Distance: 2.5 mm
Support Z Distance: 0.2 mm
    Support Top Distance: 0.2 mm
    Support Bottom Distance: 0.2 mm
Support X/Y Distance: 1 mm
Support Distance Priority: Z overrides X/Y
Minimum Support X/Y Distance: 0.25 mm
Support Stair Step Height: 0.3 mm
Support Stair Step Maximum Width: 5.0 mm
Support Join Distance: 2.0 mm
Support Horizontal Expansion: 0.2 mm
Support Infill Layer Thickness: 0.1 mm
Gradual Support Infill Steps: 0
Use Towers: Check
Tower Diameter: 3.0 mm
Minimum Diameter: 3.0 mm
Tower Roof Angle: 65° 

Build Plate Adhesion 
Build Plate Adhesion Type: Brim (for all parts of locks use "Skirt")
Skirt/Brim Minimum Length: 250 mm
Brim Width: 8.0 mm
    Brim Line Count: 15 
Brim Only on Outside: Check

Mesh Fixes 
Union Overlapping Volumes: Check
Merged Meshes Overlap: 0.15 mm

Special Modes
Print Sequence: All at Once
Surface Mode: Normal

Slicing Tolerance: Middle
Maximum Resolution: 0.01 mm
Flow rate compensation max extrusion offset: 0 mm
Flow rate compensation factor: 100%

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Simplify3D printing recommendations:

This model was tested with PLA material.

To avoid printing problems, we recommend the following settings:

Nozzle Diameter: 0.4 mm
Extrusion Multiplier: 0.97
Extrusion Width: Auto

Retraction Distance: 5.00 mm
Extra Restart Distance: 0.00 mm
Retraction Vertical Lift: 0.08 mm
Retraction Speed: 5400.0 mm/min

Wipe Distance: 5.00 mm

Primary Layer Height: 0.2 mm
Top Solid Layers: 8
Bottom Solid Layers: 5
Outline/Perimeter Shells: 2
Outline Direction: Inside-Out

First Layer Height: 90%
First Layer Width: 100%
First Layer Speed: 20%

Use Skirt/Brim: Check
Skirt Layers: 1
Skirt Offset from Part: 6.00 mm
Skirt Outlines: 5

Internal Fill Pattern: Fast Honeycomb
External Fill Patern: Rectilinear
Interior Fill Percentage: 10%
Outline Overlap: 22%
Infill Extrusion Width: 100%
Minimum Infill Length: 5.00 mm
Combine Infill Every: 1 layers

External Infill Angle Offsets: 45/-45 deg

Generate Support Material: Check
Support Infill Percentage: 15%
Extra Inflation Distance: 1.00 mm
Support Base Layers: 0
Combine Support Every: 1 layers

Dense Support Layers: 0
Dense Infill Percentage: 70%

Support Type: Normal
Support Pillar Resolution: 5.00 mm
Max Overhang Angle: 60 deg

Horizontal Offset From Part: 0.50 mm
Upper Vertical Separation Layers: 1
Lower Vertical Separation Layers: 1

Support Infill Angles: 45 deg

Extruder 1 Temperature: 210
Heated Bed: 60

Increase fan speed for layers below: 45.0 sec
  Maximum Cooling fan speed: 50%
Bridging fan speed override: 100%

Default Printing Speed: 4800.0 mm/min
Outline Underspeed: 50%
Solid Infill Underspeed: 80%
Support Structure Underspeed: 80%
X/Y Axis Movement Speed: 10800.0 mm/min
Z Axis Movemen Speed: 1002.0 mm/min

Adjust printing speed for layers below: 15.0 sec 
  Allow speed reduction down to: 20%

Unsupported area threshold: 20.0 sq m

Slic3r printing recommendations:

Layer height
  Layer height: 0.1 mm
  First layer height: 90%
Vertical shells
  Perimeters: 2
Horizontal shells
  Soid layers: 
              Top: 8
              Bottom: 5
  Detect thin walls: Check
  Detect bridging perimeters: Check
  Seam position: Random
  Fill desity: 20%
  Fill pattern: Honeycomb
  Top/bottom fill pattern: Rectilinear
Reducing printing time
  Combine infill every: 1 layers
  Solid infill every: 0 layers
  Fill angle: 25 deg
  Solid infill threshold area: 0mm
  Loops: 2
  Distance from object: 6 mm
  Skirt height: 1 layers
  Minimum extrusion length: 4 mm
  Brim width: 10 mm
Support material
  Generate support material: Check
  Overhang threshold: 45 deg
  Enforce support for the first: 3 layers
  Raft layers: 0 layers
Options for support material and raft
  Contact Z distance: 0.1 mm
  Pattern: Rectilinear
  Patter spacing: 2 mm
  Pattern angle: 0 deg
  Interface layers: 2 layers
  Interface pattern spacing: 0.2 mm
Speed for print moves
  Perimeters: 60 mm/s
  Small perimeters: 20 mm/s
  External perimeters: 20 mm/s
  Infill: 60 mm/s
  Solid infill: 60 mm/s
  Top solid infill: 30 mm/s
  Support material: 50 mm/s
  Support material interface: 100%
  Bridges: 30 mm/s
  Gap fill: 50 mm/s
Speed for non-print moves
  Travel: 60 mm/s
  First layer speed: 30 mm/s
Acceleration control
  Perimeters: 800 mm/s
  Infill: 1500 mm/s
  Bridge: 1000 mm/s
  First layer: 1000 mm/s
  Default: 1000 mm/s
  Max print speed: 100 mm/s
  Max volumetrix speed: 0 mm/s
Extrusion width
  Default extrusion width: 0.42 mm
  First layer: 0.42 mm
  Perimeters: 0.42 mm
  External perimeters: 0.42 mm
  Infill: 0.42 mm
  Solid infill: 0.42 mm
  Top solid infill: 0.42 mm
  Support material: 0.42 mm
  Infill/Perimeters overlap: 20%
  Bridge flow ratio: 0.95
  XY Size Compensation: 0 mm
  Threds: 8
  Resolution: 0 mm


comments powered by Disqus

Similar items

Browse more newly listed 3D printings