Boba Fett 2022 3D Printing Figurine | Assembly

(14)
cm: 15.4 w x 14.9 d x 24.2 h
in: 6.063 w x 5.866 d x 9.528 h

Source Files

|

Description

|

Printing Details

This 3D Figurine of Boba Fett 2022 consists of files in StereoLithography (.Stl) format that is optimized for 3D printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

WHAT WILL YOU GET AFTER PURCHASE?

  • 9 versions of The Book of Boba Fett STL files for FFF/FDMDLP/SLA and SLS - files for each version are available for download after the purchase;
  • STL files of high-poly the Mandalorian Boba Fett 3D Figurine for 3D printing consist of 139 parts;
  • Sizes:
  • FFF/FDM: 242 mm tall, 154 mm wide, 149 mm deep​​;
  • DLP/SLA/SLS: 121 mm tall, 77 mm wide, 74 mm deep;
  • Assembly Manual for FFF/FDM 1.1 and DLP/SLA 1.1 versions in PDF format;
  • Detailed settings that we provide as a recommendation for Cura, Simplify3D and Slic3r for the best print- Full technical support from the Gambody Support Team.

Detailed information about this 3D printing figurine is available in the DESCRIPTION section.

File Name File Size Time / Filament Object Size
(x/y/z mm)
1_head_FDM(repaired).stl
35.98 MiB 1 h 38 min 1 m 23 x 29 x 43 Download
2_head_in_a_helmet_FDM(re paired).stl
34.02 MiB 2 h 25 min 1 m 31 x 34 x 45 Download
3_antenna_FDM(repaired).s tl
5.89 MiB 4 min <1 m 8 x 5 x 21 Download
4_scarf_FDM(repaired).stl
17.52 MiB 54 min <1 m 30 x 31 x 16 Download
5_body_FDM(repaired).stl
48.68 MiB 9 h 40 min 5 m 59 x 44 x 66 Download
6_legs_FDM(repaired).stl
49.18 MiB 7 h 26 min 4 m 60 x 39 x 69 Download
7_arm_R_FDM(repaired).stl
33.56 MiB 2 h 25 min 1 m 52 x 28 x 53 Download
8_hand_R_with_gun_FDM(rep aired).stl
24.47 MiB 1 h 29 min 1 m 16 x 25 x 62 Download
9_arm_L_FDM(repaired).stl
23.34 MiB 2 h 4 min 1 m 56 x 23 x 55 Download
10_hand_L_FDM(repaired).s tl
12.12 MiB 30 min <1 m 14 x 16 x 28 Download
11_foot_R_FDM(repaired).s tl
31.09 MiB 2 h 46 min 1 m 35 x 32 x 62 Download
12_foot_L_FDM(repaired).s tl
31.81 MiB 2 h 49 min 1 m 29 x 37 x 62 Download
13_holster_FDM(repaired). stl
12.26 MiB 43 min <1 m 39 x 14 x 13 Download
14_pouch_1_FDM(repaired). stl
16.46 MiB 10 min <1 m 13 x 10 x 8 Download
15_pouch_2_FDM(repaired). stl
13.07 MiB 10 min <1 m 13 x 10 x 8 Download
16_pouch_3_FDM(repaired). stl
10.28 MiB 27 min <1 m 19 x 18 x 9 Download
18_jetpack_1_FDM(repaired ).stl
26.87 MiB 3 h 30 min 2 m 49 x 51 x 22 Download
19_jetpack_2_FDM(repaired ).stl
4.73 MiB 18 min <1 m 8 x 8 x 32 Download
20_jetpack_3_FDM(repaired ).stl
0.97 MiB 3 min <1 m 3 x 3 x 13 Download
21_jetpack_4_FDM(repaired ).stl
2.66 MiB 17 min <1 m 13 x 9 x 16 Download
22_jetpack_5_FDM(repaired ).stl
2.45 MiB 16 min <1 m 12 x 11 x 16 Download
23_jetpack_6_FDM(repaired ).stl
1.07 MiB 5 min <1 m 9 x 9 x 6 Download
24_jetpack_7_FDM(repaired ).stl
1.24 MiB 4 min <1 m 6 x 6 x 6 Download
25_jetpack_8_FDM(repaired ).stl
1.06 MiB 5 min <1 m 9 x 9 x 6 Download
26_rifle_FDM(repaired).st l
27.20 MiB 2 h 47 min 2 m 71 x 62 x 73 Download
27_optical sight_FDM(repa ired).stl
12.64 MiB 11 min <1 m 38 x 5 x 6 Download
29_ge_lock_10H(x1)_FDM(re paired).stl
0.03 MiB 4 min <1 m 10 x 18 x 2 Download
Keychain (repaired).stl
0.35 MiB 23 min <1 m 30 x 30 x 2 Download
Tag (repaired).stl
1.70 MiB 1 h 18 min 1 m 150 x 18 x 5 Download
17_cloak_FDM(repaired).st l
22.33 MiB 6 h 10 min 3 m 76 x 63 x 98 Download
28_platform_FDM(repaired) .stl
24.38 MiB 26 h 39 min 13 m 154 x 149 x 50 Download
...

ABOUT THIS 3D FIGURINE

The unaltered clone of the famed Mandalorian bounty hunter Jango Fett and the Galaxy’s legendary mercenary on his own is back to get control over the Tatoonie underworld! With his armour reclaimed and a trusty companion at his side, Boba Fett returns to the crime scene in the new The Book of Boba Fett TV series. The Kaminoan got older, he carries more battle scars and he seems to be set about hopping on yet another thrilling Star Wars adventure piloting the unrivalled Slave I!

Our contributing 3D artist used the references from the second season of The Mandalorian TV series and from The Book of Boba Fett trailer and promotional materials, eager to work on the newest bounty hunter 3D printing figurine. Creative efforts yielded a fantastic result and the brilliant sculpt is already ready for download!

ADAPTATION FOR 3D PRINTING

Boba Fett 2022 figurine for 3D printing is a static assembly model and its moderation and adaptation for different types of 3D printers took Gambody team 54 hours. The figurine’s anatomy and proportions were thoroughly reviewed during the moderation process for the bounty hunter to be depicted harmoniously in the intended pose.

The model’s cutting was chosen by our team to minimise the amount of generated support and some of the parts were hollowed out for you to save resin in the Eco version. In order to conceal the places where the assembly parts of the model must be connected, the figurine was cut along the contour of Boba Fett’s armour seams. For you to achieve the cleanest 3D printed result, the character’s head, helmet, rangefinder, collar, jetpack, belt pockets, holster, EE-3 carbine rifle, etc. are provided as separate assembly parts.

All assembly parts of the FFF/FDM versions come in STL files in recommended positions that were worked out in order to ensure the smoothness of the details’ surfaces after printing and so that the 3D printing beginners won't face difficulties when placing the parts on a build plate.

The figurine is saved in STL files, a format supported by most 3D printers. All STL files for 3D printing have been checked in Netfabb and no errors were shown.

The model's scale was calculated from the height of actor Temuera Morrison which is 1830 mm. The 3D printing figurine's chosen scale is 1:8 for the FFF/FDM version and 1:16 for the DLP/SLA/SLS versions.

VERSIONS' SPECIFICATIONS

FFF/FDM 1.1 version features:

  • Contains 25 parts;
  • A printed model is 242 mm tall, 154 mm wide, 149 mm deep​​;
  • The assembly kit includes lock 29_ge_lock_10H(x1) to attach the model's legs to the body securely without glue;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • The design of the helmet is fixed to be wider, following the authentic appearance;
  • The vents are added at the back;
  • The design of the jet pack is updated;
  • The design of the upper part of the boots is fixed;
  • The blaster is upgraded with authentic elements;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA Eco 1.1 version features:

  • Contains 15 parts;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • The design of the helmet is fixed to be wider, following the authentic appearance;
  • The vents are added at the back;
  • The design of the jet pack is updated;
  • The design of the upper part of the boots is fixed;
  • The blaster is upgraded with authentic elements;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.1 version features:

  • Contains 15 parts;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • The design of the helmet is fixed to be wider, following the authentic appearance;
  • The vents are added at the back;
  • The design of the jet pack is updated;
  • The design of the upper part of the boots is fixed;
  • The blaster is upgraded with authentic elements;
  • Some parts are manually hollowed out to save resin.

SLS 1.1 version features:

  • Made as a solid one-piece Boba Fett figurine;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • Contains 5 parts - solid Boba Fett model variants and the variants separated from the platform.

FFF/FDM 1.0 version features:

  • Contains 29 parts;
  • A printed model is 242 mm tall, 154 mm wide, 149 mm deep​​;
  • The assembly kit includes lock 29_ge_lock_10H(x1) to attach the model's legs to the body securely without glue;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • All parts are divided in such a way that you will print them with the smallest number of support structures.

DLP/SLA 1.0 version features:

  • Contains 15 parts;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • All parts are divided in such a way to fit the build plates and to ensure that support structures are generated where needed.

DLP/SLA Eco 1.0 version features:

  • Contains 15 parts;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • Some parts are manually hollowed out to save resin.

DLP/SLA Pre-supported 1.0 version features:

  • Contains 15 parts;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • The STL files that this version comprises are pre-supportedhollowed out, and have drain holes where needed;
  • You may choose to print the STL files one by one or several at once, depending on the dimensions of your resin 3D printer's build plate;
  • When slicing several STL files at once, the attachment layers (Platform Touch Shape) may overlap, but the supports must not come into contact.

SLS 1.0 version features:

  • Made as a solid one-piece Boba Fett figurine;
  • A printed model is 121 mm tall, 77 mm wide, 74 mm deep;
  • Two variants of the head - Boba Fett can be optionally displayed wearing the Mandalorian helmet;
  • Contains 5 parts - solid Boba Fett model variants and the variants separated from the platform.

You can get the figurine of Boba Fett 2022 for 3D Printing immediately after the purchase! Just click the green Buy button in the top-right corner of the model’s page. You can pay with PayPal or your credit card.

Watch the tutorial on how to assemble Boba Fett 2022 3D Printing Figurine at Gambody YouTube channel.

Also, you may like the original Boba Fett 3D Printing Figurine, as well as other Star Wars 3D Printing Models.

_______

FAQ: 

Below you can find printing recommendations for Cura, Simplify3D, Slic3r and PrusaSlicer software.

Disclaimer: The following printing settings are a recommendation, not an obligation. The parameters can vary depending on the peculiarities of your 3D printer, the material you use, and especially the particular assembly part you are working with. Each part that any model comprises often needs preliminary review, and you are free to tweak the settings the way you find suitable.

Note:

You can scale up the model (downscaling for FFF/FDM 3D printers is not recommended!);

All connectors should be printed at 100% Infill.

Cura printing recommendations:

These are averaged settings which were tested in the Cura 5.2.1 slicer. Test models were printed on Anycubic Vyper, Creality Ender 3 Pro with PLA filament.

To avoid printing problems, we recommend the following settings: download

Simplify3D printing recommendations:

These are averaged settings which were tested in the Simplify3D 5.0.0 slicer. Test models were printed on Anycubic Vyper, FLSUN v400, Ender3 S1 with PLA filament.

To avoid printing problems, we recommend the following settings: download

Slic3r printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in Slic3r 1.3.0 software. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PetG filaments.

To avoid printing problems, we recommend the following settings: download

PrusaSlicer printing recommendations:

These basic 3D printing settings recommendations for beginners were tested in PrusaSlicer 2.3.1. Test models were printed on Ultimaker 2, Creality Ender 3, Creality Cr-10S pro v2, Anycubic I3 Mega, Anycubic I3 MegaS, Anycubic Vyper with PLA and PETG filaments.

To avoid printing problems, we recommend the following settings: download

Comments

comments powered by Disqus

Similar items

Browse more newly listed 3D printings