Make pre-order

(5)
average
cm: 12.407 w x 15.749 d x 16 h
in: 4.885 w x 6.2 d x 6.299 h
6
BUY FOR  $11.99

Source Files

|

Description

|

Printing Details

This 3d model consists of a file in StereoLithography (.Stl) format that has been optimized for 3d printing.

Before printing the files, we strongly recommend reading the PRINTING DETAILS section.

File Name File Size Time / Filament
Witcher (repaired) (repai red).stl
51.41 MiB 36 h 32 min
23 m
Download

Witcher character from the high fantasy open-world action role-playing video game can be cold and ruthless to people who are malicious. Being by nature a loner, the Witcher possesses good character traits, being able to give helpful advice. Behind his cold gaze and behavior, he is a loyal friend.

Witcher is known for his super abilities to hunt and kill monsters. He is a pro at maneuvering his sword. He is known to be superfast, strong and witty.

Witcher 3D printed model reproduces all these traits with astonishing accuracy. The 3D printable model is 157.49mm deep, 124.07mm wide, and 160mm tall.

It will take you 30 hours and 20m or 150gr of filament to have it 3D printed. The model is available in static form, mounted on a support base to facilitate its display.

The 3D model’s downloadable files are provided in STL format, adapted for SLA/SLS and FFF printers. The files have been repaired and corrected in Netfabb and executed in CURA 15.06 and Repetier Host, and are error-free.

Buy Witcher 3D model by clicking on the “Buy” button in the top-right corner of the page. Proceed to checkout, enter your PayPal account or credit card details and download the STL files.

If you are eager to see more heroes 3D models, check Lara Croft 3D design, Vault perks models, or even Paragon Steel 3D printable design.

This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:

Quality

  • Layer height: 0.1mm*
  • Initial layer thickness: 0.3mm
  • Bottom/top pattern: lines
  • Skin perimeter line count: 0
  • Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

Check this Simplify3D User Guidelines to avoid any 3D printing problems with this software.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why, we only test print the most difficult segments of the model’s parts.

The model’s parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups for figure:

  • Infill speed: 50mm/s
  • Outer shell speed : 30mm/s
  • Inner shell speed: 20mm/s
  • Top/bottom speed: 20mm/s
  • Support speed: 50mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 30mm/s
  • Amount of slower layers: 4

Speed setups for axes: It is recommended to print the axes at 0.1mm layer height.

  • Infill speed: 50mm/s
  • Outer shell speed: 20mm/s
  • Inner shell speed: 20mm/s
  • Top/Bottom speed: 20mm/s
  • Support speed: 30mm/s
  • Travel speed: 150mm/s
  • Skirt speed: 20mm/s
  • Amount of slower layers: 4

Infill:

  • Infill pattern: Grid
  • Line distance: 3mm
  • Infill overlap: 20%
  • Infill layers: 0

Support:

  • Enable support: Check
  • Placement: Everywhere
  • Overhang angle: 30°
  • X/Y distance: 0.7mm
  • Top distance: 0.2mm
  • Bottom distance: 0.2mm
  • Stair step height: 0.5mm
  • Join distance: 0.7mm
  • Area smoothing: 0.6mm
  • Use towers: check
  • Pattern: Lines
  • Line distance: 1.5mm

Platform adhesion:

  • Type: Brim
  • Brim line count: 10 (up to 20, depending on the model’s height)

Other 3D printing recommendations:

Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.  Apply other settings by default.

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

Comments

comments powered by Disqus
Other author's 3D printings

Tags

Witcher, Wild Hunt, Hero, Game model, Static

Similar items

Browse more newly listed 3D printings